720
edits
Changes
Template:FM36YX Scenarios settings (view source)
Revision as of 14:35, 31 May 2018
, 14:35, 31 May 2018no edit summary
----
----
If ignition is ON and no movement, event will be generated when TMO reached. User can enable this functionality, select timeouts for stationary time and for movement time.<br><br>
If ignition is ON and no movement, event will be generated when TMO reached. User can enable this functionality, select timeouts for stationary time and for movement time.<br><br>
===Jamming detection (if selected DOUT1)===
===Jamming detection===
----
----
DOUT1 is ON, while modem is fixing radio frequency jamming. After jamming is over, DOUT1 is deactivated.<br><br>
DOUT1 is ON (if selected DOUT1), while modem is fixing radio frequency jamming. After jamming is over, DOUT1 is deactivated.<br><br>
===Authorized driving (if selected DOUT2)===
===Authorized driving===
----
DOUT2 is continuously OFF. Dout2 (if selected DOUT2) turns ON if Ignition turns ON (configured Ignition Source=1). After authorizing iButton (iButton ID is read and it matches the ID from the iButton list), DOUT2 turns OFF. After successful authorization ignition can be turned OFF (configured Ignition Source =0) for no longer than 30 seconds, otherwise authorization must be repeated.<br><br>
===Immobilizer===(if selected DOUT2)
----
DOUT2 is continuously OFF. Dout2 turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUT2 turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.
