0
edits
Changes
Template:FMP1 First start card (view source)
Revision as of 14:11, 2 April 2020
, 14:11, 2 April 2020Created page with "centre <b>{{{description|Plug and Play tracker with GNSS, GSM and Bluetooth connectivity and cigarette lighter power connector for easy in..."
[[Image:Qsg_rut950_teltonika.PNG|centre]]
<b>{{{description|Plug and Play tracker with GNSS, GSM and Bluetooth connectivity and cigarette lighter power connector for easy installation.}}}</b>{{{pic|[[Image:FMP100 demo.png|400px|right]]}}}
__TOC__
=='''Know your device'''==
[[Image:FMP100-withoutcover.png|center|1000px]]
<br />
=='''Set up your device'''==
===How to insert Micro-SIM card and connect the battery===
# Insert the SIM tray removal tool into the hole on the SIM card
tray and then push until the tray pops out.
# Split device cover to access battery connector inside.
# Connect the battery as shown to device.
# Gently close device cover back.
# Insert '''Nano-SIM''' card as shown with '''PIN request disabled''' or
read our Wiki how to enter it later in Teltonika Configurator.
Make sure that Nano-SIM card is fitted properly into the tray.
# Insert the SIM card tray back.
# After configuration, see “PC Connection (Windows)”.
Device is ready to be mounted.
<br />
[[Image:FMP100-insertsim1.png|170px]] [[Image:FMP100-insertsim2.png|170px]] [[Image:FMP100-insertsim3.png|170px]] [[Image:FMP100-insertsim4.png|170px]] [[Image:FMP100-insertsim5.png|170px]] [[Image:FMP100-insertsim6.png|170px]]
<br />
<br />
<table><td>[[File:Alert.png|50px|left|link=]]</td><td><b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b></td></table>
<b>{{{description|Plug and Play tracker with GNSS, GSM and Bluetooth connectivity and cigarette lighter power connector for easy installation.}}}</b>{{{pic|[[Image:FMP100 demo.png|400px|right]]}}}
__TOC__
=='''Know your device'''==
[[Image:FMP100-withoutcover.png|center|1000px]]
<br />
=='''Set up your device'''==
===How to insert Micro-SIM card and connect the battery===
# Insert the SIM tray removal tool into the hole on the SIM card
tray and then push until the tray pops out.
# Split device cover to access battery connector inside.
# Connect the battery as shown to device.
# Gently close device cover back.
# Insert '''Nano-SIM''' card as shown with '''PIN request disabled''' or
read our Wiki how to enter it later in Teltonika Configurator.
Make sure that Nano-SIM card is fitted properly into the tray.
# Insert the SIM card tray back.
# After configuration, see “PC Connection (Windows)”.
Device is ready to be mounted.
<br />
[[Image:FMP100-insertsim1.png|170px]] [[Image:FMP100-insertsim2.png|170px]] [[Image:FMP100-insertsim3.png|170px]] [[Image:FMP100-insertsim4.png|170px]] [[Image:FMP100-insertsim5.png|170px]] [[Image:FMP100-insertsim6.png|170px]]
<br />
<br />
<table><td>[[File:Alert.png|50px|left|link=]]</td><td><b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b></td></table>
