Changes

no edit summary
Line 10: Line 10:  
*Firmware version
 
*Firmware version
 
*Last Start Time - last device start time.
 
*Last Start Time - last device start time.
*RTC Time - real time clock or current device time.
+
*RTC Time - real-time clock or current device time.
 
*Power Voltage (mV)
 
*Power Voltage (mV)
 
*Device IMEI
 
*Device IMEI
Line 27: Line 27:  
*Satellites
 
*Satellites
 
**Visible -  the amount and type of satellites that are visible.
 
**Visible -  the amount and type of satellites that are visible.
**In Use - the amount of satellites used for location positioning.
+
**In Use - the number of satellites used for location positioning.
 
*Location
 
*Location
**Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with map.
+
**Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with a map.
 
**Altitude, Angle
 
**Altitude, Angle
 
**HDOP, PDOP
 
**HDOP, PDOP
Line 43: Line 43:  
**Signal Level
 
**Signal Level
 
*GPRS traffic
 
*GPRS traffic
**Sent Data - the amount of data that has been sent by device.
+
**Sent Data - the amount of data that has been sent by the device.
**Received Data - the amount of data that has been received by device.
+
**Received Data - the amount of data that has been received by the device.
 
**Total Traffic - Sent Data + Received Data
 
**Total Traffic - Sent Data + Received Data
 
*Sockets information:
 
*Sockets information:
Line 50: Line 50:  
**Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
 
**Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
 
*Records
 
*Records
**Sent Records count - how many records were sent to the server since last data reset.
+
**Sent Records count - how many records were sent to the server since the last data reset.
 
**Last Record Send - date and time when the last record was sent.
 
**Last Record Send - date and time when the last record was sent.
 
**Last Server Response Time - date and time when the last server response was.
 
**Last Server Response Time - date and time when the last server response was.
 
*SMS Count  
 
*SMS Count  
**Received SMS - the amount of SMS messages device has received.
+
**Received SMS - the amount of SMS messages the device has received.
 
**Sent SMS - the amount of SMS responses that were sent from the device.
 
**Sent SMS - the amount of SMS responses that were sent from the device.
 
**SMS Count - Received SMS + Sent SMS
 
**SMS Count - Received SMS + Sent SMS
Line 71: Line 71:  
**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
 
**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
 
[[File:logging.gif]]
 
[[File:logging.gif]]
**Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
+
:*Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
**Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
+
:*Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
*Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
+
*Accelerometer - after the button is pressed, the device starts to capture accelerometer values for 1 second.
 
{{{txt_lls|==LLS Calibration==
 
{{{txt_lls|==LLS Calibration==
 
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynom which is needed to convert sensor values to liters:
 
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynom which is needed to convert sensor values to liters:
 
+
**Table is filled row by row. Each row represents one fuel tank fill. To calculate constants it is needed to select a sensor from ''„Available sensors“'', and fill the „Fuel, L.“ column and capture the current value of a sensor by clicking the ''"Refresh"'' button. Then the next value in liters should be entered by the user and so on.  
:::Table is filled row by row. Each row represents one fuel tank fill. To calculate constants it is needed to select a sensor from „Available sensors“, and fill „Fuel, L.“ column and capture current value of a sensor by clicking "Refresh" button. Then the next value in liters should be entered by user and so on.  
+
**When a table is filled, calculated a0, a1, a2, and a3 values should be seen.
:::When table is filled, calculated a0, a1, a2 and a3 values should be seen.
+
**To add a new tank fill row click "Add row". To remove the row click the ''"minus"'' button near the row you want to clear. To Clear all the rows click ''"Clear rows"''.
:::To add a new tank fill row click "Add row". To remove the row click "minus" button near the row you want to clear. To Clear all the rows click "Clear rows".
+
**By clicking ''"Export"'' data will be exported to .csv file.
:::By clicking "Export" data will be exported to .csv file.
+
**To recalculate the polynom click on ''"Calculate"'' button.
:::To recalculate the polynom click on "Calculate" button.
      
[[File:LLS_Calibration.png]]
 
[[File:LLS_Calibration.png]]
Line 89: Line 88:     
{{{txt_obd|==OBD Info==
 
{{{txt_obd|==OBD Info==
Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMB120}}}_Bluetooth_settings#How_to_connect_OBD_II_Bluetooth_Dongle_to_FMB_device|OBDII Bluetooth Dongle]].}}}
+
Shows the main OBD parameters with current values when the device is connected to the vehicle via OBDII socket or using [[{{{model|FMB120}}}_Bluetooth_settings#How_to_connect_OBD_II_Bluetooth_Dongle_to_FMB_device|OBDII Bluetooth Dongle]].
 +
 
 +
'''Note:''' not all parameters which are displayed in the ''"OBD Info"'' tab can be readable from the vehicle.}}}
 +
 
 
{{{txt_can|==CAN Adapter Info==  
 
{{{txt_can|==CAN Adapter Info==  
Shows the parameters with current values (including program number and software version) from CAN {{{FMB140_CAN|adapter when the device is connected to LV-CAN200/ALL-CAN300/CAN-CONTROL.}}} }}}
+
Shows the parameters with current values (including program number and software version) from CAN {{{FMB140_CAN|adapter when the device is connected to [[LV-CAN200]]/[[ALL-CAN300]]/[[CAN-CONTROL]].}}}
 +
 
 +
'''Note:''' not all parameters which are displayed in the ''"CAN Adapter Info"'' tab can be readable from the vehicle.}}}