=='''How to insert Micro-SIM card and connect battery'''==
+
=='''How to insert Nano-SIM card and connect battery'''==
−
# Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.
+
# Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
−
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.
+
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
# Connect the battery as shown in the figure.
# Connect the battery as shown in the figure.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
Line 19:
Line 19:
−
Device is ready to be mounted.
+
The device is ready to be mounted.
Line 27:
Line 27:
{|
{|
|-
|-
−
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>