1,645
edits
Changes
DIGITAL TACHOGRAPH MONITORING (view source)
Revision as of 09:30, 9 April 2021
, 09:30, 9 April 2021→2. Configuring Digital Tachograph Monitoring:
==='''2. Configuring Digital Tachograph Monitoring:'''===
==='''2. Configuring Digital Tachograph Monitoring:'''===
Teltonika recommendations: <br>
CAN \ Tachograph are used to configure device when connection of CAN1 and CAN2 BUS lines are performed.
Teltonika recommendations:
* FMB640 FM6300 FMM640 and FMC640 CAN1 connected to vehicle's FMS(J1939) BUS line<br>
* FMB640 FM6300 FMM640 and FMC640 CAN1 connected to vehicle's FMS(J1939) BUS line<br>
* FMB640 FM6300 FMM640 and FMC640 CAN2 connected to vehicle's Tachograph - Instructions can be found on [[FMB640_and_Tachograph_Solution|FMB640 and Tachograph Solution]] wiki page;
* FMB640 FM6300 FMM640 and FMC640 CAN2 connected to vehicle's Tachograph - Instructions can be found on [[FMB640_and_Tachograph_Solution|FMB640 and Tachograph Solution]] wiki page;
