Changes

==Analog Fuel Sensor Connection==

===Analog Fuel Sensor Connection===

[[File:Instrument cluster pinout.png|frame|Example of service manual describing insturment cluster

[[File:Instrument cluster pinout.png|frame|Example of service manual describing insturment cluster

pinout]]

pinout]]

<br>

<br>

==Connecting and calibrating==

===Connecting and calibrating===

[[File:Connection example.png|frame|Connection example]]

[[File:Connection example.png|frame|Connection example]]

- When you have found the fuel sending wire, simply connect the tracker to the wire using the Analog Input (AIN) wire from the device.

- When you have found the fuel sending wire, simply connect the tracker to the wire using the Analog Input (AIN) wire from the device.

* On the basis of gathered data in table format, export it to file (there is button at the bottom).

* On the basis of gathered data in table format, export it to file (there is button at the bottom).

* Insert data to the software, where voltage coming from Teltonika tracking unit will be converted to liters (more details can be provided by your software supplier).

* Insert data to the software, where voltage coming from Teltonika tracking unit will be converted to liters (more details can be provided by your software supplier).

==Teltonika Configurator==

===Teltonika Configurator===

For LLS calibration go to Maintenance under the status menu (NOTE: the status menu appears only when the FM device is connected to your computer)

For LLS calibration go to Maintenance under the status menu (NOTE: the status menu appears only when the FM device is connected to your computer)

Here you can choose which Analog input you will use for data reading, enter the current amount of fuel, add and remove rows.

Here you can choose which Analog input you will use for data reading, enter the current amount of fuel, add and remove rows.