Template:FTX Data Sending Parameters ID

Teltonika devices send data in packets that follow a specific structure, as defined on our Codec page. Each parameter in a record is identified by a Data Sending ID (AVL ID). These IDs are used to extract the correct values from the hexadecimal data during processing on the server side.

This page lists all available AVL IDs for {{{model}}}. Differences in AVL IDs between the FT and legacy FMB platforms are described on the dedicated page. Property IDs in the AVL packet that differ between platforms are marked in bold.

The document is based on firmware version 3.0.7 or newer. AVL IDs are grouped into the following parameter groups:

Permanent I/O elements

---

Property ID in AVL packet	Property Name	Bytes	Type	Min Value	Max Value	Multiplier	Units	Description	Parameter Group
16	Total Odometer	4	Unsigned	0	2147483647	-	m	Virtual odometer value	Permanent I/O elements
17	Axis X	2	Signed	-8000	8000	-	mg	Axis X value	Permanent I/O elements
18	Axis Y	2	Signed	-8000	8000	-	mg	Axis Y value	Permanent I/O elements
19	Axis Z	2	Signed	-8000	8000	-	mg	Axis Z value	Permanent I/O elements
21	GSM Signal	1	Unsigned	0	5	-	-	Value in range 1-5	Permanent I/O Elements
67	Battery Voltage	2	Unsigned	0	65535	-	mV	Voltage	Permanent I/O elements
68	Battery Current	2	Unsigned	0	65535	-	mA	Current	Permanent I/O elements
69	GNSS Status	1	Unsigned	0	3	-	-	0 - GNSS OFF 1 - GNSS ON with fix 2 - GNSS ON without fix 3 - GNSS sleep	Permanent I/O elements
70	PCB temperature	2	Signed	-550	1150	-	°C	Degrees	Permanent I/O elements
113	Battery level	1	Unsigned	0	100	-	°C	Battery capacity level	Permanent I/O elements
181	GNSS PDOP	2	Unsigned	0	500	-	m	GNSS position dilution of precision. Normal PDOP is below 3 – the lower the number, the more accurate reported location is.	Permanent I/O elements
182	GNSS HDOP	2	Unsigned	0	500	-	m	GNSS horizontal dilution of precision. Normal HDOP is below 2 – the lower the number, the more accurate reported location is.	Permanent I/O elements
199	Trip Odometer	4	Unsigned	0	2147483647	-	m	Trip distance value calculated by GNSS	Permanent I/O elements
205	GSM Cell ID	4	Unsigned	0	2147483647	-	-	GSM base station ID	Permanent I/O elements
206	GSM Area Code	2	Unsigned	0	65535	-	-	Location Area code (LAC), it depends on GSM operator. It provides unique number which assigned to a set of base GSM stations	Permanent I/O elements
237	Network Type	1	Unsigned	0	1	-	-	0 - 3G 1 - GSM 2 - 4G 3 - LTE CAT M1 4 - LTE CAT NB1 99 - Unknown	Permanent I/O elements
239	Ignition	1	Unsigned	0	1	-	-	0 – Ignition Off 1 – Ignition On	Permanent I/O Elements
240	Movement	1	Unsigned	0	1	-	-	0 – Movement Off 1 – Movement On	Permanent I/O Elements
241	GSM operator code	4	Unsigned	0	4294967295	-	-	Currently used GSM Operator code	Permanent I/O elements
303	Instant Movement	1	Unsigned	0	1	-	-	Logic: 0/1 returns movement value	Permanent I/O elements
641	ICCID	22	ASCII	0	22	-	-	Value of SIM ICCID (Integrated circuit card identification number)	Permanent I/O elements
800	External Voltage	2	Unsigned	0	4294967295	-	mV	Voltage	Permanent I/O elements
1148	Connectivity quality	4	Unsigned	0	2147483647	-	dBm	Provides detailed signal quality information in LTE, eMTC (CAT-Mx) and NB-IoT modes: RSSI (byte 0): 0 - 255 in dBm (negative values) RSRP (byte 1): 0 - 255 in dBm (negative values) SINR (byte 2): 0 - 250 which translates to -20dB to +30dB (1/5th of dB) RSRQ (byte 3): 0 - 255 in dB (negative values)	Permanent I/O elements
13361	Incoming call detection	1	Unsigned	0	1	-	-	0 – No incoming call 1 – An incoming call is in progress	Permanent I/O elements
200	Sleep Mode	1	Unsigned	0	2	-	-	0 – Normal mode(No Sleep) 1 – GPS Sleep 2 – Deep Sleep 3 – Online Sleep 4 – Ultra Sleep	Permanent I/O elements
383	Accelerometer calibration status	1	Unsigned	0	3	-	-	Shows calibration status: 0- No calibration, 1- Calibrated, 2- Not configured, 3- Fully calibrated	Permanent I/O elements
386	Time from last fix	2	Unsigned	0	65535	-	sec	-	Permanent I/O elements
449	Ignition On Counter	4	Unsigned	0	2147483647	-	sec	Counter that represents how much seconds the device spent with ignition in ON state	Permanent I/O elements
13370	Neighbouring Cell 1 LAC	2	Unsigned	0	65534	-	-	Location Area Code of the Cell #1. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13371	Neighbouring Cell 1 ID	4	Unsigned	0	4294967295	-	-	Unique ID of the LTE Cell 1. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13372	Neighbouring Cell 1 RSSI	1	Unsigned	0	63	-	dB	Signal strength of Cell #1. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13373	Neighbouring Cell 1 MNC	1	Unsigned	-	-	-	-	Mobile Network Code of Cell #4. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13374	Neighbouring Cell 1 MCC	1	Unsigned	-	-	-	-	Mobile Country Code of Cell #1. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13375	Neighbouring Cell 2 LAC	2	Unsigned	0	65534	-	-	Location Area Code of the Cell #2. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13376	Neighbouring Cell 2 ID	4	Unsigned	0	4294967295	-	-	Unique ID of the LTE Cell 2. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13377	Neighbouring Cell 2 RSSI	1	Unsigned	0	63	-	dB	Signal strength of Cell #2. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13378	Neighbouring Cell 2 MNC	1	Unsigned	-	-	-	-	Mobile Network Code of Cell #2. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13379	Neighbouring Cell 2 MCC	1	Unsigned	-	-	-	-	Mobile Country Code of Cell #2. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13380	Neighbouring Cell 3 LAC	2	Unsigned	0	65534	-	-	Location Area Code of the Cell #3. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13381	Neighbouring Cell 3 ID	4	Unsigned	0	4294967295	-	-	Unique ID of the LTE Cell 3. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13382	Neighbouring Cell 3 RSSI	1	Unsigned	0	63	-	dB	Signal strength of Cell #3. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13383	Neighbouring Cell 3 MNC	1	Unsigned	-	-	-	-	Mobile Network Code of Cell #3. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13384	Neighbouring Cell 3 MCC	1	Unsigned	-	-	-	-	Mobile Country Code of Cell #3. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13385	Neighbouring Cell 4 LAC	2	Unsigned	0	65534	-	-	Location Area Code of the Cell #4. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13386	Neighbouring Cell 4 ID	4	Unsigned	0	4294967295	-	-	Unique ID of the LTE Cell 4. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13387	Neighbouring Cell 4 RSSI	1	Unsigned	0	63	-	dB	Signal strength of Cell #4. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13388	Neighbouring Cell 4 MNC	1	Unsigned	-	-	-	-	Mobile Network Code of Cell #4. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements
13389	Neighbouring Cell 4 MCC	1	Unsigned	-	-	-	-	Mobile Country Code of Cell #4. Included in records as Permanent I/O when LBS mode is configured as "Location Source"	Permanent I/O elements

Eventual I/O elements

---

Property ID in AVL packet	Property Name	Bytes	Type	Min Value	Max Value	Multiplier	Units	Description	Parameter Group
155	Manual Geofence ID	2	Unsigned	0	49	-	-	Value = (<geofence_id> - 1); eg. geofence #10 generates AVL ID 155 with value 9	Eventual I/O elements
156	Manual Geofence In-zone event	1	Unsigned	0	1	-	-	0 - Exit event; 1 - Enter event	Eventual I/O elements
157	Manual Geofence Speeding event	1	Unsigned	0	1	-	-	0 - Speeding stop event; 1 - Speeding start event	Eventual I/O elements
257	Crash trace data	1200	HEX	0	1200	-	-	Crash trace data	Eventual I/O elements
1429	Crash average vector	8	Unsigned	-	-	-	mG	Stores the average vector calculated during the crash: 2B - X axis, 2B - Y axis, 2B - Z axis, 2B - magnitude in mG.	Eventual I/O elements
1430	Crash direction	-	Unsigned	-	-	-	-	Stores the indication if the accelerometer is calibrated. Also, indicates the direction of the crash. 1 bit (highest bit) indicates calibration status, rest of the bits indicates crash direction.	Eventual I/O elements
1431	Crash duration	-	Unsigned	-	-	-	-	Duration of the crash event	Eventual I/O elements
1432	Crash max vector	8	Unsigned	-	-	-	mG	Stores the max vector calculated during the crash: 2B - X axis, 2B - Y axis, 2B - Z axis, 2B - magnitude in mG.	Eventual I/O elements
255	Over Speeding	1	Unsigned	0	255	-	km/h	At over speeding start km/h, at over speeding end km/h	Eventual I/O elements
250	Trip	1	Unsigned	0	1	-	-	0 – trip stop 1 – trip start 2 – Business Status 3 – Private Status 4-9 – Custom Statuses	Eventual I/O elements
253	Eco driving type	1	Unsigned	1	3	-	-	1 – harsh acceleration 2 – harsh braking 3 – harsh cornering	Eventual I/O elements
254	Eco driving value	1	Unsigned	0	255	0.01	G or rad	Depending on Eco driving type: if harsh acceleration or braking – g*100 (value 123 -> 1.23g). If Eco driving source is „GPS“ – harsh cornering value is rad/s*100. If source is „Accelerometer“ – g*100.	Eventual I/O elements
251	Excessive idling	1	Unsigned	0	1	-	-	0 – Moving 1 – Idling	Eventual I/O elements
249	Network jamming detection	1	Unsigned	0	1	-	-	Logic: 0/1	Eventual I/O elements
252	Unplug detection	1	Unsigned	0	1	-	-	0 – Battery present 1 – Battery unplugged	Eventual I/O elements
175	Auto geofence	1	Unsigned	0	1	-	-	0 – Target left zone 1 – Target enetered zone	Eventual I/O elements
246	Towing detection	1	Unsigned	0	1	-	-	0 – Steady 1 – Towing	Eventual I/O elements
358	Custom scenario 1	1	Unsigned	0	1	-	-	0 – Custom Scenario Inactive 1 – Custom Scenario Activated	Eventual I/O elements
359	Custom scenario 2	1	Unsigned	0	1	-	-	0 – Custom Scenario Inactive 1 – Custom Scenario Activated	Eventual I/O elements
360	Custom scenario 3	1	Unsigned	0	1	-	-	0 – Custom Scenario Inactive 1 – Custom Scenario Activated	Eventual I/O elements

[[Category:{{{model}}}]]