EYE SENSOR MESH/MTSMP1: Difference between revisions

Latest revision as of 17:18, 2 April 2026

Main Page > Sensors > EYE SENSOR MESH/MTSMP1

Introduction

Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID beacon model from Teltonika with robust waterproof casing and a long-lifetime battery. The model designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.

About MTSID1

Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Also, it suitable for indoor tracking solutions for items tracking in warehouses, hospitals, transport hubs and other types of industrial areas. EYE beacon supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika mobile app.

Product Specification

Features

Battery and power
Model	CR2450
Type	Lithium, Manganese Dioxide (Li/MnO2)
Total Capacity	600 mAh
Replaceable	No
Battery life (5 min)	2 years*
Battery life (10 min)	3,5 years*
Battery life (30 min)	7 years*
Battery life (60 min)	10 years*
Battery life (15 min on stop, 1 min moving), default _{Scenario where device moves 2 hour per day}	2.7 years*

*At ambient room temperature

Dimensions and weight
Dimensions	56,6 mm x 38 mm x 13 mm
Weight	19 g

Features
Sensors	Temperature Humidity Movement Magnet detection
Scenarios	Temperature tracking, Mobile objects tracking, Medical equipment tracking, Goods tracking
Sleep mode	Hibernate
Configuration and firmware update	Mesh network

Electronics
Microcontroller	Silicon Labs EFR32BG22C224F512GM32-C

Certification & approvals
Certificates	CE/RED (EU), RoHS (EU), REACH (EU), IP rating


Connectivity
Wirepas	Wirepas Mesh v5.4
Available transmission power levels	Up to 6 dBm


Casing
Protection	IP67
Mounting	Two mounting points on each side
Marking	Available branding customisation upon request

Environmental Requirements
Humidity (non-condensing)	From 0% to 100%
Operational temperature	-20 °C / +60 °C (-4 °F / +140 °F)

Dimensions

Value-adding Features

Hibernate mode

Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life. PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON - Default) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on eye page

During hibernation, the device consumes very little power. So it is great for storing the device for a long time without battery drain. When the device is in hibernation mode, it will not be able to communicate with other devices in the network. The only way to wake up the device from hibernation is to wake up device with magnet. After wake up led blinks in the wake up pattern (100 ms high, 1 s low for ten times).

Value of hibernate mode

Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life.
1. Accelerated delivery times:

By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry front runner, enhancing your competitive edge.

2. Mitigated project risks:

In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.

How to activate hibernated eye device?

Attach any magnet to sleeping device and wait for LED to blink.
NOTE: ANY MAGNET CAN BE USED

Now device is active.

How to send the device to hibernate mode?

If you want to put the EYE device back to hibernate mode after activation or simply pause its use, you may do that only via Mesh Network:
For whole class (MTSID1): F67E019A09FE070105019DF1C37A
For whole class (MTSMP1): F67E019A09FF070105019DF1C37A

Can All devices hibernate?

1. All EYE Beacons Mesh and Eye Sensors Mesh can hibernate.

Mounting recomendations

EYE Beacon Protocol overview

Parsing Custom 11/11 endpoint for Sensors data

Teltonika 11/11 ep is sent together with Wirepas 238/238 endpoint. So both packets are sent in the same interval. 11/11 ep packet follows static, dynamic, and offline periods set in Wirepas configuration.

Parameter name	Value type	Type	Length	Endianness	Units	Conversion	Error code
Counter	uint16_t	0x01	2	Little	Count	-	-
Temperature	int32_t	0x02	4	Little	Celsius	value / 100	9cff3100 (3276700)
Humidity	uint32_t	0x03	4	Little	%	value / 1024	00fc0300 (255)
Axl x	int32_t	0x05	4	Little	mG	-	ffffff7f (2097152)
Axl y	int32_t	0x06	4	Little	mG	-	ffffff7f (2097152)
Axl z	int32_t	0x07	4	Little	mG	-	ffffff7f (2097152)
Pitch	int16_t	0x08	2	Little	Degree	-	ff7f (32767)
Roll	int16_t	0x09	2	Little	Degree	-	ff7f (32767)
Magnetic field	Bool	0x0A	1	Little	-	00 (False) or 01 (True)	-
Movement	Bool	0x0B	1	Little	-	00 (False) or 01 (True)	-

e.g. what to look for in MQTT gw-event/received_data/<GATEWAY_NAME>/sink0/<NETWORK_ADDRESS>/11/11 data payloadParsed example of 11/11 Endpoint data payload: 0102C3830204C20100000304101C0100050420000000060400000000070430FCFFFF080201000902B4000A01000B0100

Type	Parameter Name	Length	Raw Value	Parsed Value	Units	Notes
0x01	Error Code	2	C383	33731	—	uint16
0x02	Temperature	4	C2010000	4.50	°C	value / 100
0x03	Humidity	4	101C0100	71.02	%	value / 1024
0x05	Axl X	4	20000000	32	mG	int32
0x06	Axl Y	4	00000000	0	mG	int32
0x07	Axl Z	4	30FCFFFF	-976	mG	int32
0x08	Pitch	2	0100	1	°	int16
0x09	Roll	2	B400	180	°	int16
0x0A	Hall	1	00	False	—	boolean

Note:

Counter is always sent in the wirepas network to make sure have correct order of packets.

Battery is sent through wirepas positioning endpoint (238/238).

Parsing standard 238/238 endpoint for Rssi and battery info

More detailed info about endpoint 238 Wirepas Positioning Application Reference Manual v1.5 : Measurement Message

Parameter name	Type	Length	Endianness	Units	Conversion
Battery voltage	0x05	2	Little	Count	-
Tag RSSI measurement, 4 byte node address	0x05	variable	Little	Celsius	value / 100

e.g. what to look for in MQTT gw-event/received_data/<GATEWAY_NAME>/sink0/<NETWORK_ADDRESS>/238/238 data payload

Parsed example of 238/238 Endpoint data payload: 1000050A2300000068E89E89004E0402110C060A3C0000001100000001FF

Type	Parameter Name	Length	Raw Value	Parsed Value	Units	Notes
0x05	Tag RSSI measurement, 4 byte node address	10	2300000068E89E89004E	Node adress1: 35 (23 hex) Rssi1: -52 dBm Node adress2: 9019112 (899EE8 hex) Rssi2: -39 dBm	—	4 bytes byte node address fallowed by Rssi Rssi = value * -0.5
0x04	Battery voltage	2	110C	3089	mV

Safety information

This message contains information on how to operate MTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.

2. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Partner Portal/Helpdesk.

Certification & Approvals


Certificates	Links	Valid for Model
FCC (USA)	Yes	All
CE/RED (EU)	Yes	All
RoHS (EU)	Yes	All
REACH (EU)	Yes	All
IP rating	Yes	All

Memberships


Name	Links
WEEE	Yes
Battery WEEE	Yes

Nomenclature & Classification codes


Name	Links
EAN	Yes
HS	Yes
ECCN	Yes

External Links

Product Page

https://teltonika-gps.com/eye/ UpdateDU

Product Change Notifications

The latest Product Change Notifications can be found: Product Change Notifications UpdateDU

Software Errata

Firmware Errata: BTS firmware errata UpdateDU

Promotional Material

Product Promotional Material Page UpdateDU

Partner Providers Supporting Software

TBA

Frequently asked questions (FAQ)

TBA

Documents

TBA

Additional information

For EOL policy please refer to link here.

@@ Line 33: / Line 33: @@
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |No
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (5 min)
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2 years*
 |-
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (10 min), default
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (10 min)
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |3 years*
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |3,5 years*
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (30 min)
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |6.5 years*
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |7 years*
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (60 min)
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |10 years*
+|-
+|style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (15 min on stop, 1 min moving), default
+<sub>Scenario where device moves 2 hour per day</sub>
+|style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2.7 years*
 |}
 <nowiki>*</nowiki>At ambient room temperature
@@ Line 420: / Line 424: @@
 | style="width:25%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
 |}
 <br><p style="font-size:32px"><span style="color:#0054A6">Safety information</span></p>
 This message contains information on how to operate MTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
@@ Line 466: / Line 469: @@
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |WEEE
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1 WEEE|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[MTSMP1 WEEE|Yes]]
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery WEEE
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1 Battery WEEE|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[MTSMP1 Battery WEEE|Yes]]
 |}
@@ Line 479: / Line 482: @@
 ! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EAN UpdateDU
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EAN
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_EAN|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[MTSMP1 EAN|Yes]]
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |HS
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_HS|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[MTSMP1 HS|Yes]]
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ECCN
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_ECCN|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[MTSMP1 ECCN|Yes]]
 |}