Device is blocked when it connects to an operator with restricted '''Mobile Country Code (MCC)''' it saves blocking timestamp (current timestamp + 28 days) and starts the counter. The counter tracks the cumulative number of days the device spends connected to an operator with restricted MCC.
'''Important: ''iButton Read Notification'' feature has been replaced with ''Authorized Read Notification'' starting from Firmware Ver.03.30.00''' <br>
If the device reaches '''28 cumulative days''' of connection to to an operator with restricted '''MCC''', it will be '''automatically blocked'''.
Authorized read notification feature allows the control of selected DOUT for a configured period, when '''Authorized ID''' is read using '''1-Wire''', '''RFID Reader''' or when '''Authorized Beacon''' is detected. If Authorized ID List is empty or Beacon detection is set to '''All''', then any detected ID or Beacon can control selected DOUT. Parameter '''Depend on Ignition''' allows to disable DOUT control, while Ignition is being detected. It is necessary to select at least one source for this functionality to work.
===Blacklisted Countries===
Authorized Read Notification parameters:
The below table provides blacklisted '''Mobile Country Codes'''.
*'''Output Control''' – available scenario settings for module Digital output activation/deactivation
'''Note:''' Authorized read notification is disabled in '''deep sleep''', '''online deep sleep''' and '''ultra deep sleep''' modes.
To reset the counter and timestamp, the device must connect to a non-restricted '''MCC''' continuously for '''7 uninterrupted days'''.
If the device disconnects from operator with a '''non-restricted MCC''' or connects to operator with a restricted MCC during this 7-day reset period, the reset process fails, and the 28-day counter continues accumulating.
===Unblocking Conditions===
In order for device to be unblocked it must maintain a continuous connection to operators with non-restricted '''MCCs for a full 7 days'''. Additionally, the device must have an active time synchronization and an inserted SIM card. If the device connects to a restricted operator MCC during this period, the unblocking counter resets.
===Blocked Actions===
While device is in a blocked state the following services are restricted:
Firmware can not be downgraded below '''3.7.0''' where Country Blocking Service was introduced.
Revision as of 12:44, 3 April 2026
Authorized Read Notification
Important: iButton Read Notification feature has been replaced with Authorized Read Notification starting from Firmware Ver.03.30.00
Authorized read notification feature allows the control of selected DOUT for a configured period, when Authorized ID is read using 1-Wire, RFID Reader or when Authorized Beacon is detected. If Authorized ID List is empty or Beacon detection is set to All, then any detected ID or Beacon can control selected DOUT. Parameter Depend on Ignition allows to disable DOUT control, while Ignition is being detected. It is necessary to select at least one source for this functionality to work.
Authorized Read Notification parameters:
Output Control – available scenario settings for module Digital output activation/deactivation
DOUT ON Duration – a value in seconds, for how long DOUT1/DOUT2 should be active or inactive.
Authorization ID List Checking - Provides Authorized ID information from a designated source.
FMB devices that do not have RS232 will have support for 1-Wire and Beacon only.
FMB devices that do not have RS232 and 1-Wire will have support for Beacon only.
Depend on Ignition - Output will be triggered only if ignition is off.
Note: Authorized read notification is disabled in deep sleep, online deep sleep and ultra deep sleep modes.
