Test-AC: Difference between revisions

Revision as of 12:44, 3 April 2026

Authorized Read Notification

Important: iButton Read Notification feature has been replaced with Authorized Read Notification starting from Firmware Ver.03.30.00

Authorized read notification feature allows the control of selected DOUT for a configured period, when Authorized ID is read using 1-Wire, RFID Reader or when Authorized Beacon is detected. If Authorized ID List is empty or Beacon detection is set to All, then any detected ID or Beacon can control selected DOUT. Parameter Depend on Ignition allows to disable DOUT control, while Ignition is being detected. It is necessary to select at least one source for this functionality to work.

Authorized Read Notification parameters:

Output Control – available scenario settings for module Digital output activation/deactivation
DOUT ON Duration – a value in seconds, for how long DOUT1/DOUT2 should be active or inactive.
Authorization ID List Checking - Provides Authorized ID information from a designated source.
- FMB devices that do not have RS232 will have support for 1-Wire and Beacon only.
- FMB devices that do not have RS232 and 1-Wire will have support for Beacon only.
Depend on Ignition - Output will be triggered only if ignition is off.

Note: Authorized read notification is disabled in deep sleep, online deep sleep and ultra deep sleep modes.

@@ Line 1: / Line 1: @@
-{| class="wikitable" style="width: 100%;"
+==Authorized Read Notification==
-|+
+'''Important: ''iButton Read Notification'' feature has been replaced with ''Authorized Read Notification'' starting from Firmware Ver.03.30.00''' <br>
-! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
-! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
-! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<span class="mw-headline" id="04.01.00.Rev.08">{{{fw|'''04.02.00.Rev.05'''}}}</span><br />
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2026-02-01}}}
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
-'''New Features:'''
-*'''NEW!''' Added BLE sensor error codes.
-*'''NEW!''' GNSS Augmentation and PAP+CHAP GPRS authentication added.
-*'''NEW!''' Added possibility to configure saving/not saving last known coordinate into flash.
-*'''NEW!'''  Added PCB Temperature IO.
-*'''NEW!'''  Added new GNSS IO - Status Value.
-'''Improvements:'''
-*Improved CAN Odometer reading and sending.
-*Improved modem initiation after restart.
-*Improved Manual Geofence handling in low speed.
-*Improved restoring coordinates from flash algorithm.
-*Improved ''fwstats'' command response restart section.
-*Improved Total Mileage maximum value, which now can be more than 1 million.
-*Improved BLE communication with iOS over GATT.
-*Improved Accelerometer analysis methods.
-*Improved maximum DOUT off duration on idling event.
-*Improved internal file management for faster operation.
-*Improved CAN adapter connection state detection.
-*Improved validation for the range of “Distance Since Refuel” values.
-*Improved calculation logic for distance-based parameters.
-*Improved fluctuations in “Distance Since Refuel” readings.
-*improved Operator Ban List.
-*Improved GNSS Jamming.
-*Stability improvements.
-'''Resolved issues:'''
-*Resolved Trip Odometer on startup showing Total Odometer value.
-*Resolved Func WD no send not working for backup server.
-*Resolved immobilizer authorization status after restart.
-*Resolved DOUT2/DOUT3 control via ignition feature.
-*Resolved keyword setting over BT for configurator.
-*Resolved issue with GNSS reconfiguration to QZSS.
-*Resolved issue with BLE Hidden mode visibility.
-*Resolved program number reset via major FW update.
-*Resolved [LVCAN] Presence flagging trace spamming in log.
-*Resolved issue with misleading firmware status after update.
-*Resolved issue when "Beacon Presence" parameter did not show value.
-*Resolved issue with duplicate GSM status update after device restart.
-'''Fixes:'''
-*Fixed reset conditions for Total Odometer calculations.
-*Fixed incorrect handling of “Distance Since Refuel” in non-OBD compliant modes.
-*Fixed signed integer issue in HV Battery Lifetime Energy data.
-*Fixed modem initialization issue when SIM PIN is required.
-*Fixed time synchronization issue.
-*Fixed NTP ''timesync'' getting stuck.
-*Fixed Abnormal altitude spam when GPS is not stable.
-*Fixed Vehicle speed always being 255.
-*Fixed Advanced beacon names appear incorrectly in configurator.
-*Fixed RFID, BLE RFID IOs operand value.
-*Fixed HV battery parameter unit conversion.
-*Fixed CAN adapter information update in FOTA WEB.
-*Fixed throttle position data handling after reconfiguration.
-*General Fixes
+[[Image:Authorized_Read_Notification.gif|{{{general|size}}}||right]]
-|-
+Authorized read notification feature allows the control of selected DOUT for a configured period, when '''Authorized ID''' is read using '''1-Wire''', '''RFID Reader''' or when '''Authorized Beacon''' is detected. If Authorized ID List is empty or Beacon detection is set to '''All''', then any detected ID or Beacon can control selected DOUT. Parameter '''Depend on Ignition''' allows to disable DOUT control, while Ignition is being detected. It is necessary to select at least one source for this functionality to work.
-|}
+Authorized Read Notification parameters:
+*'''Output Control''' – available scenario settings for module Digital output activation/deactivation
+*'''DOUT ON Duration''' – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive.
+*'''Authorization ID List Checking''' - Provides Authorized ID information from a designated source.
+**FMB devices that do not have RS232 will have support for 1-Wire and Beacon only.
+**FMB devices that do not have RS232 and 1-Wire will have support for Beacon only.
+*'''Depend on Ignition''' - Output will be triggered only if ignition is off.
+'''Note:''' Authorized read notification is disabled in '''deep sleep''', '''online deep sleep''' and '''ultra deep sleep''' modes.