Jump to content
  • EN

Test-AC: Difference between revisions

From Teltonika Telematics Wiki
← Older editNewer edit →
VisualWikitext
No edit summary
(87 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Power Saving settings==
==SMS/GPRS command - obdinfo==
{{#switch: {{{model}}}
[[File:smsgprscommand_COMMANDNAME.png|300px|right|alt=obdinfo]]
| #default =
{{Template:SMSGPRScommandPage
[[File:FTX power saving settings.png|right|500 px]]
|description= Provides information pertaining to OBD functionality}}
| ATC700
===Syntax===
| ATM700 =  
obdinfo
[[File:ATX power saving settings.png|right|500 px]]
obdinfo<value>
}}
===Arguments===
Puts the device into a power-saving mode, preserving the power consumption from the external source or the internal battery.
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
{{#switch: {{{model}}}
| #default =  
| ATC700
| ATM700 =
}}
 
===Online Sleep===
*In Online Sleep mode, the device manages the connection only when records need to be sent. The connection is opened at periodic intervals to send records and closed immediately after, without any timeout.
*Changing the Permanent Link setting during Online Sleep will wake up the device to apply the new configuration.
*With Permanent Link enabled, the device maintains a constant connection, sending records immediately as they are generated, rather than waiting for the next scheduled send. After sending connection remains open.
*All listed entry conditions must be met in order to enter Online Sleep.
*At least one exit condition must be met in order to wake up from Online Sleep.
<br>
 
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse; border-bottom: 3px solid #336699;">
 
<tr>
<tr>
<th style="width:1%; vertical-align: middle; text-align: center;">Module</th>
<th style="width:30%; vertical-align: middle; text-align: left;">ARGUMENT</th>
<th style="width:1%; vertical-align: middle; text-align: center;">Entry Conditions</th>
<th style="width:70%; vertical-align: middle; text-align: left;">ARGUMENT DESCRIPTION</th>
<th style="width:5%; vertical-align: middle; text-align: center;">Exit conditions</th>
<th style="width:6%; vertical-align: middle; text-align: center;">Disabled functions</th>
 
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;"><value></td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''Main'''''</td>
<td style="vertical-align: middle; text-align: left;">A value range of 1–3 represents a particular set of data</td>
<td style="vertical-align: middle; text-align: left; min-width: 550px; border-bottom: 3px solid #336699;">
</tr>  
*Configured '''Ignition source''' is off.<br>
</table>
*Movement is not detected by the configured '''Movement source'''.<br>
===Examples===
*Device time must be synchronized, as this condition depends on the ''Record Settings -> Saving / sending mode'' parameter<br>
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
**'''After Position Fix''' - device time is synchronized with GNSS satellites and GPS fix is obtained.<br>
<tr>
**'''After Time Sync''' - device time is synchronized over NTP, NITZ, or GNSS satellites.<br>
<th style="width:15%; vertical-align: middle; text-align: left;">REQUEST</th>
**'''Always''' - device will enter sleep mode without time synchronization and GPS fix.<br>
<th style="width:15%; vertical-align: middle; text-align: left;">OUTCOME</th>
*Sleep timeout is reached.<br>
<th style="width:70%; vertical-align: middle; text-align: left;">RESPONSE</th>
*No SMS messages are being received.<br>
*No open Data sockets (ignored with enabled permanent link)<br>
*No active FOTA WEB connection progress.<br>
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 150px; border-bottom: 3px solid #336699;">
*Ignition is ON.<br>
*Movement is detected.<br>
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN1}} | *DIN1 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | *DIN2 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | *DIN3 is activated }}
*Periodic wake-up (if enabled).<br></td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 100px; border-bottom: 3px solid #336699;">  
*GNSS<br>
*Odometer<br>
*Data acquisition<br>
*SNTP time synchronization<br>
*Overspeeding<br>
*Trip<br>
*Jamming Detection<br>
*Eco Driving<br>
</td>
 
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;">obdinfo</td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |--->
<td style="vertical-align: middle; text-align: left;">Success</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''CAN'''''</td>
<td style="vertical-align: middle; text-align: left;"></td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
</tr>
*No communication with Main module for 1 second.
<tr>
*No configured CAN data is read for 5 seconds.
<td style="vertical-align: middle; text-align: left;">obdinfo1</td>
*At least 1 second has passed since the last module wake up.</td>
<td style="vertical-align: middle; text-align: left;">Success</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px; border-bottom: 3px solid #336699;"">
<td style="vertical-align: middle; text-align: left;">P1:0x0,P2:0x0,P3:0x0,P4:0x0,C1:0x0,C2:0x0,C3:0x0,C4:0x0,Hdr:0,Phy:0,CFG:0,v100.304.100 H:6 M:2</td>
*Main module sends any request via UART.<br>
*Any CAN data is present on the CAN bus.<br></td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">  
*CAN
</td>
}}
 
</tr>
</tr>
<tr>
<tr>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual BT}} |--->
<td style="vertical-align: middle; text-align: left;">obdinfo2</td>
<td style="vertical-align: middle; text-align: left;">'''''BLE'''''</td>
<td style="vertical-align: middle; text-align: left;">Success</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: left;">Prot:0,VIN:N/A,TM:20,CNT:0,ST:IDLE,P1:0x0,P2:0x0,P3:0x0,P4:0x0,MIL:0,DTC:0,ID1,Hdr:0,Phy:0</td>
*Main module enters Online/Deep sleep modes.
*No communication with Main module for 1 second.
*At least 1 second has passed since the last module wake up.</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px;"">
*The device can wake up from sleep when a DIN input changes (detected through the external MCU).
*DIN pins remain active in sleep mode and can be used as wake-up sources for the device.</td>
<td style="vertical-align: middle; text-align: left;"> </td>
}}
 
</tr>
</tr>
</table>
===Deep Sleep===
{{#switch: {{{model}}}
| #default =
*During Deep Sleep mode, the device generates and stores periodic records.
*All listed entry conditions must be met in order to enter Deep Sleep.
*At least one exit condition must be met in order to wake up from Deep Sleep.
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse; border-bottom: 3px solid #336699;">
<tr>
<tr>
<th style="width:1%; vertical-align: middle; text-align: center;">Module</th>
<td style="vertical-align: middle; text-align: left;">obdinfo3</td>
<th style="width:1%; vertical-align: middle; text-align: center;">Entry Conditions</th>
<td style="vertical-align: middle; text-align: left;">Success</td>
<th style="width:5%; vertical-align: middle; text-align: center;">Exit conditions</th>
<td style="vertical-align: middle; text-align: left;">[7E8]:0x22232425,0x9015B015,0x22232425,0x22232425,0x22232425,0x22232425</td>
<th style="width:6%; vertical-align: middle; text-align: center;">Disabled functions</th>
 
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;">obdinfo</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''Main'''''</td>
<td style="vertical-align: middle; text-align: left;">Fail</td>
<td style="vertical-align: middle; text-align: left; min-width: 550px; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: left;">
*Configured '''Ignition source''' is off.
OBD is Locked now! (if locked) <br>
*Movement is not detected by the configured '''Movement source'''.
OBD unsupported!<br>
*Device time must be synchronized, as this condition depends on the ''Record Settings -> Saving / sending mode'' parameter.
OBD communication failed!
**'''After Position Fix''' - device time is synchronized with GNSS satellites and GPS fix is obtained.
**'''After Time Sync''' - device time is synchronized over NTP, NITZ, or GNSS satellites.
**'''Always''' - device will enter sleep mode without time synchronization and GPS fix.
*Sleep timeout is reached.
*No SMS messages are being received.
*No open Data sockets (ignored with enabled permanent link)<br>
*No active FOTA WEB connection progress.
</td>
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 150px; border-bottom: 3px solid #336699;">
</tr>
*Ignition is ON.
<tr>
*Movement is detected.
<td style="vertical-align: middle; text-align: left;">obdinfo1</td>
*Periodic wake-up (if enabled).
<td style="vertical-align: middle; text-align: left;">Fail</td>
</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; horizontal-align: center; min-width: 100px; border-bottom: 3px solid #336699;">  
OBD is Locked now! (if locked) <br>
*Modem
OBD unsupported!<br>
*Record sending
OBD communication failed!
*GNSS
*IMU (Inertial Measurement Unit)
*FOTA WEB
*LEDs (Navigation and Status)
*Odometer
*Data acquisition
*SNTP time synchronization
*Overspeeding
*Trip
*Jamming Detection
*Eco Driving
</td>
</td>
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;">obdinfo2</td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |--->
<td style="vertical-align: middle; text-align: left;">Fail</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''CAN'''''</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
OBD is Locked now! (if locked) <br>
*No communication with Main module for 1 second.
OBD unsupported!<br>
*No configured CAN data is read for 5 seconds.
OBD communication failed!
*At least 1 second has passed since the last module wake up.
</td>
</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px; border-bottom: 3px solid #336699;"">
*Main module sends any request via UART.
*Any CAN data is present on the CAN bus.
</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
*CAN
</td>
}}
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;">obdinfo3</td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual BT}} |--->
<td style="vertical-align: middle; text-align: left;">Fail</td>
<td style="vertical-align: middle; text-align: left;">'''''BLE'''''</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: left;">
*Main module enters Online/Deep sleep modes.
OBD is Locked now! (if locked) <br>
*No communication with Main module for 1 second.
OBD unsupported!<br>
*At least 1 second has passed since the last module wake up.
OBD communication failed!
</td>
</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px;"">
*The device can wake up from sleep when a DIN input changes (detected through the external module).
*DIN pins remain active in sleep mode and can be used as wake-up sources for the device.
</td>
<td style="vertical-align: middle; text-align: left;">
*BLE scanning
</td>
}}
</tr>
</tr>
</table>
</table>
| ATC700
===Response Explanation===
| ATM700 =
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
}}
===Power Off Sleep===
*All listed entry conditions must be met in order to enter Power Off Sleep.
*At least one exit condition must be met in order to wake up from Power Off Sleep.
When device goes into sleep mode, some modules are turned off to consume less power. Listed below are the modules and scenarios that are turned off in common with all modes and those that are disabled specifically for the '''Power off sleep''' mode:
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse; border-bottom: 3px solid #336699;">
 
<tr>
<tr>
<th style="width:1%; vertical-align: middle; text-align: center;">Module</th>
<th vertical-align: middle; text-align: center;">RESPONSE ELEMENT</th>
<th style="width:1%; vertical-align: middle; text-align: center;">Entry Conditions</th>
<th vertical-align: middle; text-align: center;">DESCRIPTION</th>
<th style="width:5%; vertical-align: middle; text-align: center;">Exit conditions</th>
<th vertical-align: middle; text-align: center;">EXAMPLE</th>
<th style="width:6%; vertical-align: middle; text-align: center;">Disabled functions</th>
 
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''Main'''''</td>
P1 - P4
<td style="vertical-align: middle; text-align: left; min-width: 550px; border-bottom: 3px solid #336699;">
*Configured '''Ignition source''' is off.
*Movement is not detected by the configured '''Movement source'''.
*Device time must be synchronized, as this condition depends on the ''Record Settings -> Saving / sending mode'' parameter
**'''After Position Fix''' - device time is synchronized with GNSS satellites and GPS fix is obtained.
**'''After Time Sync''' - device time is synchronized over NTP, NITZ, or GNSS satellites.
**'''Always''' - device will enter sleep mode without time synchronization and GPS fix.
*Sleep timeout is reached.
*No SMS messages are being received.
*No open Data sockets (ignored with enabled permanent link)<br>
*No active FOTA WEB connection progress.
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN1}} | *DIN1 is deactivated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | *DIN2 is deactivated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | *DIN3 is deactivated }}
</td>
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 150px; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: left;">Available PIDs</td>
*Ignition is ON.
<td style="vertical-align: middle; text-align: left;">P3:0x0</td>
*Movement is detected.
</tr>
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN1}} | *DIN1 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | *DIN2 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | *DIN3 is activated }}
<tr>
<td style="vertical-align: middle; text-align: left;">C1 - C4</td>
<td style="vertical-align: middle; text-align: left;">Configured PIDs</td>
<td style="vertical-align: middle; text-align: left;">C4:0x0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">Hdr</td>
<td style="vertical-align: middle; text-align: left;">-</td>
<td style="vertical-align: middle; text-align: left;">Hdr:0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">Phy</td>
<td style="vertical-align: middle; text-align: left;">Address</td>
<td style="vertical-align: middle; text-align: left;">Phy:0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">CFG</td>
<td style="vertical-align: middle; text-align: left;">Configuration  header</td>
<td style="vertical-align: middle; text-align: left;">CFG:0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">vX.Y.Z</td>
<td style="vertical-align: middle; text-align: left;">Chip hardware version:
X – OBD BL version in hex<br>
Y – OBD FW version in hex<br>
Z – OBD BLU version in hex
</td>
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 100px; border-bottom: 3px solid #336699;">  
<td style="vertical-align: middle; text-align: left;">v100.304.100</td>
*Modem
</tr>
*Record sending
<tr>
*GNSS
<td style="vertical-align: middle; text-align: left;">H</td>
*IMU (Inertial Measurement Unit)
<td style="vertical-align: middle; text-align: left;">Chip hardware</td>
*FOTA WEB
<td style="vertical-align: middle; text-align: left;">H:6</td>
*Charger service
</tr>
*LEDs (Navigation and Status)
<tr>
*Odometer
<td style="vertical-align: middle; text-align: left;">M</td>
*Data acquisition
<td style="vertical-align: middle; text-align: left;">Chip modification version</td>
*SNTP time synchronization
<td style="vertical-align: middle; text-align: left;">M:2</td>
*Overspeeding
</tr>
*Trip
<tr>
*Unplug Detection
<td style="vertical-align: middle; text-align: left;">Prot</td>
*Jamming Detection
<td style="vertical-align: middle; text-align: left;">Protocol</td>
*Eco Driving
<td style="vertical-align: middle; text-align: left;">Prot:0</td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |--->
</tr>
*CAN (''does not receive requests, does not read CAN bus messages'')
<tr>
}}
<td style="vertical-align: middle; text-align: left;">VIN</td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT}} | *BLE--->
<td style="vertical-align: middle; text-align: left;">VIN number</td>
**PIN's are unavailable while BLE module is off.
<td style="vertical-align: middle; text-align: left;">VIN:9999999999999999999</td>
**Anything connected or enabled by BLE module(1 wire, DIN's, DOUT's, BLE as a peripheral)
</tr>
}}
<tr>
</td>
<td style="vertical-align: middle; text-align: left;">TM</td>
 
<td style="vertical-align: middle; text-align: left;">Timing</td>
<td style="vertical-align: middle; text-align: left;">TM:20</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">CNT</td>
<td style="vertical-align: middle; text-align: left;">-</td>
<td style="vertical-align: middle; text-align: left;">CNT:0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">ST</td>
<td style="vertical-align: middle; text-align: left;">State</td>
<td style="vertical-align: middle; text-align: left;">ST:IDLE</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">P1 - P4</td>
<td style="vertical-align: middle; text-align: left;">PIDs</td>
<td style="vertical-align: middle; text-align: left;">P1:0x0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">MIL</td>
<td style="vertical-align: middle; text-align: left;">-</td>
<td style="vertical-align: middle; text-align: left;">MIL:0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">DTC</td>
<td style="vertical-align: middle; text-align: left;">-</td>
<td style="vertical-align: middle; text-align: left;">DTC:0</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">ID</td>
<td style="vertical-align: middle; text-align: left;">Chip ID</td>
<td style="vertical-align: middle; text-align: left;">ID1</td>
</tr>
<tr>
<td style="vertical-align: middle; text-align: left;">Hdr</td>
<td style="vertical-align: middle; text-align: left;">-</td>
<td style="vertical-align: middle; text-align: left;">Hdr:0</td>
</tr>
</tr>
<tr>
<tr>
 
<td style="vertical-align: middle; text-align: left;">Phy</td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |--->
<td style="vertical-align: middle; text-align: left;">Address</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''CAN'''''</td>
<td style="vertical-align: middle; text-align: left;">Phy:0</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
*Main module enters power off sleep mode.
</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px; border-bottom: 3px solid #336699;"">
*Main module wakes up and restarts CAN module.
</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
*CAN (''does not receive requests, does not read CAN bus messages'')
</td>
}}
 
</tr>
</tr>
<tr>
<tr>
<!---
<td style="vertical-align: middle; text-align: left;">ECU header </td>
<!---{{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT}} | --->>
<td style="vertical-align: middle; text-align: left;">'''''BLE'''''</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: left;">
*Main module enters power off sleep mode.
0x<pids_1_32><br>
</td>
0x<pids_33_64><br>
<td style="vertical-align: middle; text-align: left; min-width: 150px;"">
0x<pids_65_96><br>
*Main module wakes up and restarts BLE module.
0x<pids_97_128><br>
</td>
0x<pids_129_160><br>
<td style="vertical-align: middle; text-align: left;">  
0x<pids_161_192><br>
*PIN's are unavailable while BLE module is off.
*Anything connected or enabled by BLE module(1 wire, DIN's, DOUT's, BLE as a peripheral)
</td>
</td>
}}
<td style="vertical-align: middle; text-align: left;">[7E8]:0x22232425,0x9015B015,0x22232425,0x22232425,0x22232425,0x22232425</td>
 
</tr>
</tr>
</table>
</table>

Revision as of 13:03, 8 June 2026

Pages with broken file links > Test-AC

SMS/GPRS command - obdinfo

obdinfo

NOTE! This page describes SMS/GPRS commands for FT/AT devices, if not indicated otherwise.

Description

Provides information pertaining to OBD functionality

Syntax

obdinfo
obdinfo<value>

Arguments

ARGUMENT ARGUMENT DESCRIPTION
<value> A value range of 1–3 represents a particular set of data

Examples

REQUEST OUTCOME RESPONSE
obdinfo Success
obdinfo1 Success P1:0x0,P2:0x0,P3:0x0,P4:0x0,C1:0x0,C2:0x0,C3:0x0,C4:0x0,Hdr:0,Phy:0,CFG:0,v100.304.100 H:6 M:2
obdinfo2 Success Prot:0,VIN:N/A,TM:20,CNT:0,ST:IDLE,P1:0x0,P2:0x0,P3:0x0,P4:0x0,MIL:0,DTC:0,ID1,Hdr:0,Phy:0
obdinfo3 Success [7E8]:0x22232425,0x9015B015,0x22232425,0x22232425,0x22232425,0x22232425
obdinfo Fail

OBD is Locked now! (if locked)
OBD unsupported!
OBD communication failed!

obdinfo1 Fail

OBD is Locked now! (if locked)
OBD unsupported!
OBD communication failed!

obdinfo2 Fail

OBD is Locked now! (if locked)
OBD unsupported!
OBD communication failed!

obdinfo3 Fail

OBD is Locked now! (if locked)
OBD unsupported!
OBD communication failed!

Response Explanation

RESPONSE ELEMENT DESCRIPTION EXAMPLE

P1 - P4

Available PIDs P3:0x0
C1 - C4 Configured PIDs C4:0x0
Hdr - Hdr:0
Phy Address Phy:0
CFG Configuration header CFG:0
vX.Y.Z Chip hardware version:

X – OBD BL version in hex
Y – OBD FW version in hex
Z – OBD BLU version in hex

v100.304.100
H Chip hardware H:6
M Chip modification version M:2
Prot Protocol Prot:0
VIN VIN number VIN:9999999999999999999
TM Timing TM:20
CNT - CNT:0
ST State ST:IDLE
P1 - P4 PIDs P1:0x0
MIL - MIL:0
DTC - DTC:0
ID Chip ID ID1
Hdr - Hdr:0
Phy Address Phy:0
ECU header

0x<pids_1_32>
0x<pids_33_64>
0x<pids_65_96>
0x<pids_97_128>
0x<pids_129_160>
0x<pids_161_192>

 [7E8]:0x22232425,0x9015B015,0x22232425,0x22232425,0x22232425,0x22232425
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Test-AC&oldid=114159"