Difference between revisions of "FMB110 LED status"
From Wiki Knowledge Base | Teltonika GPS
Simkunas.ma (talk | contribs) (Created page with "{{Template:FMB1 LED status|model=FMB110}}") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{Template:FMB1 LED status|model=FMB110 | + | {{Template:FMB1 LED status|model=FMB110}} |
| − | |||
| − | }} | ||
| − | |||
Revision as of 08:51, 23 May 2018
Main Page > Advanced Trackers > FMB110 > FMB110 Manual > FMB110 LED statusThis section is an explanation of LED indications on an FMB110 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
CAN Status LED indications
| Behaviour | Meaning |
|---|---|
| Blinking fast constantly | Reading CAN data from vehicle |
| Permanently switched on | CAN unit unresponsive |
| Off | Wrong program number or wrong wire connection or CAN processor is in sleep mode = CAN data not received |
