Difference between revisions of "Template:FMA SMS/GPRS command list"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{Template:FMB FW development notice}} All commands are case sensitive. When user tries to send SMS/GPRS message to {{{model|FMB1YX}}} that operates in Deep Sleep mode, it ca...")
(78 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Template:FMB FW development notice}}
 
{{Template:FMB FW development notice}}
  
−
Click [[FMA120 GSM settings, SMS part|Here]] to know how to construct a proper SMS message and send it to {{{model|FMA1YX}}} device. All commands are case sensitive. While {{{model|FMA1YX}}} operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to {{{model|FMA1YX}}} device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). {{{model|FMA1YX}}} will receive the SMS when it wakes up (exits deep sleep mode).
+
All commands are case sensitive. When user tries to send SMS/GPRS message to {{{model|FMB1YX}}} that operates in Deep Sleep mode, it cannot arrive to {{{model|FMB1YX}}} device because the GSM/GPRS module is disabled most of the time. {{{model|FMB1YX}}} will receive the SMS/GPRS message when it exits Deep Sleep mode.<br/>If {{{model|FMB1YX}}} is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
  
  
−
==SMS command list==
+
==Common commands==
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 12: Line 12:
 
! style="width: 50px; background: black; color: white;" | Response
 
! style="width: 50px; background: black; color: white;" | Response
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getstatus|getstatus]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getinfo|getinfo]]''
−
| style="text-align: left; vertical-align: top;" | Modem Status information.
+
| style="text-align: left; vertical-align: top;" | Device runtime system information.
 +
| style="text-align: left; vertical-align: top;" | Yes
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB getver|getver]]''
 +
| style="text-align: left; vertical-align: top;" | Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getweektime|getweektime]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getstatus|getstatus]]''
−
| style="text-align: left; vertical-align: top;" | Current device time, Day of Week and amount of minutes passed since start of week
+
| style="text-align: left; vertical-align: top;" | Modem Status information.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMB getops|getops]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getgps|getgps]]''
−
| style="text-align: left; vertical-align: top;" | List of currently available GSM operator
+
| style="text-align: left; vertical-align: top;" | Current GPS data, date and time.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getcfgtime|getcfgtime]]''
+
! style="text-align: left; vertical-align: top;" | {{{cmd_getio|''[[FMB getio|getio]]''}}}
−
| style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration
+
| style="text-align: left; vertical-align: top;" | Readout analog input,digital input and output.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA ggps|ggps]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB ggps|ggps]]''
 
| style="text-align: left; vertical-align: top;" | Returns location information with Google maps link.
 
| style="text-align: left; vertical-align: top;" | Returns location information with Google maps link.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getgps|getgps]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB readio|readio]] #''
−
| style="text-align: left; vertical-align: top;" | Current GPS data, date and time.
+
| style="text-align: left; vertical-align: top;" | Returns IO status, # AVL ID.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
Line 40: Line 44:
 
| style="text-align: left; vertical-align: top;" | No
 
| style="text-align: left; vertical-align: top;" | No
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''resetprof''
+
 
−
| style="text-align: left; vertical-align: top;" | Reset all FLASH1 profile configuration to default profile
+
! style="text-align: left; vertical-align: top;" | ''[[FMB fwstats|fwstats]]''
−
| style="text-align: left; vertical-align: top;" | No
+
| style="text-align: left; vertical-align: top;" | Get data about FW and restarts
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getver|getver]]''
 
−
| style="text-align: left; vertical-align: top;" | Device / Modem / Code version information.
 
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getinfo|getinfo]]''
+
 
−
| style="text-align: left; vertical-align: top;" | Device runtime system information.
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getrecord|getrecord]]''
−
| style="text-align: left; vertical-align: top;" | Yes
+
| style="text-align: left; vertical-align: top;" | SMS command iitiates saving and sending of high priority record
 +
| style="text-align: left; vertical-align: top;" | No
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''deleterecords''
+
 
−
| style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getimeiccid|getimeiccid]]''
 +
| style="text-align: left; vertical-align: top;" | Reponse is sent to SMS/GPRS sender and to number which is provided.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getio|getio]]''
+
 
−
| style="text-align: left; vertical-align: top;" | Readout analog input,digital input and output.
+
 
 +
 
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB allver|allver]]''
 +
| style="text-align: left; vertical-align: top;" | Responds with information about hardware and firmware versions and storage space
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA readio|readio]] #''
+
 
−
| style="text-align: left; vertical-align: top;" | Returns IO status, # AVL ID.
+
 
 +
 
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB getparam|getparam]] #''
 +
| style="text-align: left; vertical-align: top;" | Returns selected parameter value, # param [[FMB Device Family Parameter list|ID]].
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setdigout|setdigout]] ## Y1 Y2''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB setparam|setparam]] #:#''
−
| style="text-align: left; vertical-align: top;" | Set digital output.|<br/>
+
| style="text-align: left; vertical-align: top;" rowspan="2" | Sets selected parameter value.<br/>
−
1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>
+
1.# - first [[FMB Device Family Parameter list|ID value]].<br/>
−
2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>
+
2.# - New first Parameter Value.<br/>
−
Y1 – timeout value for DOUT1 if needed (in seconds).<br/>
+
3.# - second [[FMB Device Family Parameter list|ID value]].<br/>
−
Y2 – timeout value for DOUT2 if needed (in seconds).
+
4.# - New second Parameter Value.<br/>
−
| style="text-align: left; vertical-align: top;" | Yes
+
5.# - third [[FMB Device Family Parameter list|ID value]].<br/>
−
|-
+
6.# - New third Parameter Value.<br/>
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setdigout|setdigout]] X Z Y''
+
SMS command is limited to 160 characters.
−
| style="text-align: left; vertical-align: top;" |  set selected digital output<br/>
+
| style="text-align: left; vertical-align: top;" rowspan="2" | Yes
−
X – number of Digital output (1 – digital output 1; 2 – digital output 2).<br/>
 
−
Z – activate(1)/deactivate(0).<br/ >
 
−
Y – activation/deactivation timeout.<br/>
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getparam|getparam]] #''
 
−
| style="text-align: left; vertical-align: top;" | Returns selected parameter value, # param [[FMA Device Family Parameter list|ID]].
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getparam 1271 X/212 X|getparam 1271 X]]''
 
−
| style="text-align: left; vertical-align: top;" | X values can be 1,2,3. 
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setparam|setparam]] # #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB setparam|setparam]] #:#;#:#;…''
−
| style="text-align: left; vertical-align: top;" | Sets selected parameter value.<br/>
 
−
1.# - ID value.<br/>
 
−
2.# - New first Parameter Value.<br/>
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA flush|flush]] #,#,#,#,#,#,#''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB flush|flush]] #,#,#,#,#,#,#''
−
| style="text-align: left; vertical-align: top;" | Initiates all data sending to specified target server.<br/>
+
| style="text-align: left; vertical-align: top;" | Redirects device to other server.<br/>
 
1.# - IMEI.<br/>
 
1.# - IMEI.<br/>
 
2.# - APN.<br/>
 
2.# - APN.<br/>
Line 104: Line 97:
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA readops|readops]] #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB countrecs|countrecs]]''
−
| style="text-align: left; vertical-align: top;" | 1 – send first 20 operator codes<br/>
+
| style="text-align: left; vertical-align: top;" | Returns records number.
−
2 – send from 21<sup>st</sup> to 40<sup>th</sup> operator codes.<br/>
+
| style="text-align: left; vertical-align: top;" | Yes
−
3 – send all other operator codes.
+
|-
−
| style="text-align: left; vertical-align: top;" | No
+
! style="text-align: left; vertical-align: top;" | ''deleterecords''
 +
| style="text-align: left; vertical-align: top;" | Delete all records from SD card.
 +
| style="text-align: left; vertical-align: top;" | Yes
 +
|-
 +
! style="{{{hide_setdigout|}}}text-align: left; vertical-align: top;" | {{{cmd_setdigout|''[[FMB setdigout|setdigout]] ## Y1 Y2''}}}
 +
| style="{{{hide_setdigout|}}}text-align: left; vertical-align: top;" | Set digital output.{{{txt_setdigout|<br/>1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>Y1 – timeout value for DOUT1 if needed (in seconds).<br/>Y2 – timeout value for DOUT2 if needed (in seconds).}}}
 +
| style="{{{hide_setdigout|}}}display: none; text-align: left; vertical-align: top;" | Yes
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB battery|battery]]''
 +
| style="text-align: left; vertical-align: top;" | Returns battery state info.
 +
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA sn|sn]] #''
+
! style="text-align: left; vertical-align: top;" | ''wdlog''
−
| style="text-align: left; vertical-align: top;" | Static navigation, 1 – enable, 0 – disable
+
| style="text-align: left; vertical-align: top;" | Returns all information about 'watch dogs' restarts.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA banlist|banlist]] #''
+
! style="text-align: left; vertical-align: top;" | ''defaultcfg''
−
| style="text-align: left; vertical-align: top;" | Banned operators information.
+
| style="text-align: left; vertical-align: top;" | Load default configuration.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA crashlog|crashlog]] #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB setkey|setkey]] # #''
−
| style="text-align: left; vertical-align: top;" | Device last information before unexpected reset.
+
| style="text-align: left; vertical-align: top;" | Add new or change current configuration keyword. If device is locked, keyword cannot be changed.<br/>
 +
1.# - old keyword (if adding new keyword space).<br/>
 +
2.# - new keyword.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''delete_all_sms''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB delkey|delkey]] #''
−
| style="text-align: left; vertical-align: top;" | Deletes all SMS
+
| style="text-align: left; vertical-align: top;" | Remove existing keyword (If device is locked, keyword cannot be changed).<br/>
−
| style="text-align: left; vertical-align: top;" | No
+
1.# - old keyword.
 +
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA lvcangetprog|lvcangetprog]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB bbread|bbread]] #''
−
| style="text-align: left; vertical-align: top;" | CAN Program Number request by SMS
+
| style="text-align: left; vertical-align: top;" | Return black box information (HEX value of event ID and HEX value of custom data field (optional)).<br/>
 +
1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA lvcansetprog |lvcansetprog]] #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB bbinfo|bbinfo]] #''
−
| style="text-align: left; vertical-align: top;" | Set LVCAN program number.
+
| style="text-align: left; vertical-align: top;" | Return same information as bbread command but additional all events timestamp is written in HEX.<br/>
 +
1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA lvcangetinfo|lvcangetinfo]]''
+
! style="text-align: left; vertical-align: top;" | ''sdformat''
−
| style="text-align: left; vertical-align: top;" | Get LV-CAN info by SMS.
+
| style="text-align: left; vertical-align: top;" | Format SD card.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''getcontsens''
+
|}
−
| style="text-align: left; vertical-align: top;" | Get IDs of connected temperature sensors.
+
 
 +
{{{sect_features|{{Template:FMB Features SMS/GRPS commands}}}}}
 +
 
 +
==Commands related to Bluetooth==
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 150px; background: black; color: white;"  | Command
 +
! style="width: 500px; background: black; color: white;" | Description
 +
! style="width: 50px; background: black; color: white;" | Response
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB btgetlist|btgetlist]] #''
 +
| style="text-align: left; vertical-align: top;" | Returns requested Bluetooth list. <br/># - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected).
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA faultcode|faultcode]]''
+
! style="text-align: left; vertical-align: top;" | ''btscan''
−
| style="text-align: left; vertical-align: top;" | Read DTC
+
| style="text-align: left; vertical-align: top;" | Starts Bluetooth scan.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setkey|setkey]] # #''
+
! style="text-align: left; vertical-align: top;" | ''btvisible #''
−
| style="text-align: left; vertical-align: top;" | Add new or change current configuration keyword.<br/>
+
| style="text-align: left; vertical-align: top;" | Sets Bluetooth to visible with TMO. <br/># - visibility TMO (from 1 to 255 seconds).
−
1.# - old keyword (if adding new keyword space).<br/>
 
−
2.# - new keyword.
 
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA delkey|delkey]] #''
+
! style="text-align: left; vertical-align: top;" | ''btrelease #''
−
| style="text-align: left; vertical-align: top;" | Delete configuration keyword.
+
| style="text-align: left; vertical-align: top;" | Disconnects from current device and pauses auto connect functionality for TMO. <br/># - none or TMO (from 1 to 255 seconds).
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA dtcinfo|dtcinfo]] #''
+
! style="text-align: left; vertical-align: top;" | ''btunpair #''
−
| style="text-align: left; vertical-align: top;" | DTC information.
+
| style="text-align: left; vertical-align: top;" | Unpair Bluetooth device. <br/># - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
 
|}
 
|}
 +
 +
{{{sect_obd|{{Template:FMB OBD SMS/GRPS commands}}}}}
 +
 +
{{{sect_can|{{Template:FMB CAN SMS/GRPS commands}}}}}

Revision as of 10:17, 22 August 2018


All commands are case sensitive. When user tries to send SMS/GPRS message to FMB1YX that operates in Deep Sleep mode, it cannot arrive to FMB1YX device because the GSM/GPRS module is disabled most of the time. FMB1YX will receive the SMS/GPRS message when it exits Deep Sleep mode.
If FMB1YX is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.


Common commands

Command Description Response
getinfo Device runtime system information. Yes
getver Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address. Yes
getstatus Modem Status information. Yes
getgps Current GPS data, date and time. Yes
getio Readout analog input,digital input and output. Yes
ggps Returns location information with Google maps link. Yes
readio # Returns IO status, # AVL ID. Yes
cpureset Resets device. No
fwstats Get data about FW and restarts Yes
getrecord SMS command iitiates saving and sending of high priority record No
getimeiccid Reponse is sent to SMS/GPRS sender and to number which is provided. Yes
allver Responds with information about hardware and firmware versions and storage space Yes
getparam # Returns selected parameter value, # param ID. Yes
setparam #:# Sets selected parameter value.

1.# - first ID value.
2.# - New first Parameter Value.
3.# - second ID value.
4.# - New second Parameter Value.
5.# - third ID value.
6.# - New third Parameter Value.
SMS command is limited to 160 characters.

Yes
setparam #:#;#:#;…
flush #,#,#,#,#,#,# Redirects device to other server.

1.# - IMEI.
2.# - APN.
3.# - LOGIN.
4.# - PASS.
5.# - IP.
6.# - PORT.
7.# - MODE (0-TCP/1-UDP).

Yes
countrecs Returns records number. Yes
deleterecords Delete all records from SD card. Yes
setdigout ## Y1 Y2 Set digital output.
1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.
2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.
Y1 – timeout value for DOUT1 if needed (in seconds).
Y2 – timeout value for DOUT2 if needed (in seconds). 		Yes
battery Returns battery state info. Yes
wdlog Returns all information about 'watch dogs' restarts. Yes
defaultcfg Load default configuration. Yes
setkey # # Add new or change current configuration keyword. If device is locked, keyword cannot be changed.

1.# - old keyword (if adding new keyword space).
2.# - new keyword.

Yes
delkey # Remove existing keyword (If device is locked, keyword cannot be changed).

1.# - old keyword.

Yes
bbread # Return black box information (HEX value of event ID and HEX value of custom data field (optional)).

1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.

Yes
bbinfo # Return same information as bbread command but additional all events timestamp is written in HEX.

1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.

Yes
sdformat Format SD card. Yes

Commands related to features

Command Description Response
fc_reset Resets fuel consumption parameters. Yes
towingreact Towing reactivation. Yes
auto_calibrate:set Calibrate position if car accelerate straight to > 30 km/h for 5 sec. Yes
auto_calibrate:get Returns the state of calibration. Yes
odoset:# Set total odometer value.
# - new odometer value in km. 		Yes
odoget Display current odometer value. Yes
on_demand_trackingX X=0 – Stops Tracking on Demand functionality.
X=1 – Starts Tracking on Demand functionality.
X=2 – Generates one high priority record and inititates data sending to server.
 Yes

Commands related to Bluetooth

Command Description Response
btgetlist # Returns requested Bluetooth list.
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected). 		Yes
btscan Starts Bluetooth scan. Yes
btvisible # Sets Bluetooth to visible with TMO.
# - visibility TMO (from 1 to 255 seconds). 		Yes
btrelease # Disconnects from current device and pauses auto connect functionality for TMO.
# - none or TMO (from 1 to 255 seconds). 		Yes
btunpair # Unpair Bluetooth device.
# - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address). 		Yes

Commands related to OBD

Command Description Response
obdinfo If connected with Blue-tooth OBD dongle displays all available information from OBD. Yes
faultcodes If connected with Blue-tooth OBD dongle display all visible fault codes. Yes
cleardtc Clears all vehicle stored fault codes. No
getvin Get vehicle VIN code, if OBD dongle is connected. Yes

Commands related to LV-CAN200/ALL-CAN300

Command Description Response
lvcansetprog # Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX.
# three digit number that identity vehicle. 		Yes
lvcansimpletacho # Add or remove simpletacho start byte.
# - 0 or 1 (0 – don’t add start byte, 1 – add start byte). 		No
lvcangetprog Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. Yes
lvcangetinfo Get information about connected LV-CAN200/ALL-CAN300. Yes
lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. 		Yes
allcanmode Turn on ALL-CAN300 mode. Yes
lvcanmode Turn on LV-CAN200 mode. Yes
lvcanfaultcodes Read DTC fault codes. Yes
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMA_SMS/GPRS_command_list&oldid=17520"