Difference between revisions of "Template:FMA SMS/GPRS command list"

From Wiki Knowledge Base | Teltonika GPS
(59 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Template:FMB FW development notice}}
 
{{Template:FMB FW development notice}}
  
−
Click [[FMA120 GSM settings, SMS part|Here]] to know how to construct a proper SMS message and send it to {{{model|FMA1YX}}} device. All commands are case sensitive. While {{{model|FMA1YX}}} operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to {{{model|FMA1YX}}} device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter).  {{{model|FMA1YX}}} will receive the SMS when it wakes up (exits deep sleep mode).
+
Read chapter 5.10 to know how to construct a proper SMS message and send it to {{{model|FMA1YX}}} device. All commands are case sensitive. While {{{model|FMA1YX}}} operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to {{{model|FMA1YX}}} device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter).  {{{model|FMA1YX}}} will receive the SMS when it wakes up (exits deep sleep mode).
  
  
Line 12: Line 12:
 
! style="width: 50px; background: black; color: white;" | Response
 
! style="width: 50px; background: black; color: white;" | Response
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getstatus|getstatus]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getinfo|getinfo]]''
−
| style="text-align: left; vertical-align: top;" | Modem Status information.
+
| style="text-align: left; vertical-align: top;" | Device runtime system information.
 +
| style="text-align: left; vertical-align: top;" | Yes
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB getver|getver]]''
 +
| style="text-align: left; vertical-align: top;" | Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getweektime|getweektime]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getstatus|getstatus]]''
−
| style="text-align: left; vertical-align: top;" | Current device time, Day of Week and amount of minutes passed since start of week
+
| style="text-align: left; vertical-align: top;" | Modem Status information.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMB getops|getops]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getgps|getgps]]''
−
| style="text-align: left; vertical-align: top;" | List of currently available GSM operator
+
| style="text-align: left; vertical-align: top;" | Current GPS data, date and time.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getcfgtime|getcfgtime]]''
+
! style="text-align: left; vertical-align: top;" | {{{cmd_getio|''[[FMB getio|getio]]''}}}
−
| style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration
+
| style="text-align: left; vertical-align: top;" | Readout analog input,digital input and output.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA ggps|ggps]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB ggps|ggps]]''
 
| style="text-align: left; vertical-align: top;" | Returns location information with Google maps link.
 
| style="text-align: left; vertical-align: top;" | Returns location information with Google maps link.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getgps|getgps]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB readio|readio]] #''
−
| style="text-align: left; vertical-align: top;" | Current GPS data, date and time.
+
| style="text-align: left; vertical-align: top;" | Returns IO status, # AVL ID.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
Line 40: Line 44:
 
| style="text-align: left; vertical-align: top;" | No
 
| style="text-align: left; vertical-align: top;" | No
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''resetprof''
+
 
−
| style="text-align: left; vertical-align: top;" | Reset all FLASH1 profile configuration to default profile
+
! style="text-align: left; vertical-align: top;" | ''[[FMA getweektime|getweektime]]''
−
| style="text-align: left; vertical-align: top;" | No
+
| style="text-align: left; vertical-align: top;" | Current device time, Day of Week and amount of minutes passed since start of week
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getver|getver]]''
 
−
| style="text-align: left; vertical-align: top;" | Device / Modem / Code version information.
 
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getinfo|getinfo]]''
+
 
−
| style="text-align: left; vertical-align: top;" | Device runtime system information.
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getops|getops]]''
 +
| style="text-align: left; vertical-align: top;" | List of currently available GSM operator
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''deleterecords''
+
 
−
| style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH
+
! style="text-align: left; vertical-align: top;" | ''[[FMB getcfgtime|getcfgtime]]''
 +
| style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getio|getio]]''
+
 
−
| style="text-align: left; vertical-align: top;" | Readout analog input,digital input and output.
+
 
−
| style="text-align: left; vertical-align: top;" | Yes
+
 
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB resetprof|resetprof]]''
 +
| style="text-align: left; vertical-align: top;" | Reset all FLASH1 profile configuration to default profile
 +
| style="text-align: left; vertical-align: top;" | No
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA readio|readio]] #''
+
 
−
| style="text-align: left; vertical-align: top;" | Returns IO status, # AVL ID.
+
 
 +
 
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB getparam|getparam]] #''
 +
| style="text-align: left; vertical-align: top;" | Returns selected parameter value, # param [[FMB Device Family Parameter list|ID]].
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setdigout|setdigout]] ## Y1 Y2''
+
! style="text-align: left; vertical-align: top;" | ''[[FMA getparam 1271 X|getparam 1271 X]]''
−
| style="text-align: left; vertical-align: top;" | Set digital output.|<br/>
 
−
1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>
 
−
2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>
 
−
Y1 – timeout value for DOUT1 if needed (in seconds).<br/>
 
−
Y2 – timeout value for DOUT2 if needed (in seconds).
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setdigout|setdigout]] X Z Y''
 
−
| style="text-align: left; vertical-align: top;" |  set selected digital output<br/>
 
−
X – number of Digital output (1 – digital output 1; 2 – digital output 2).<br/>
 
−
Z – activate(1)/deactivate(0).<br/ >
 
−
Y – activation/deactivation timeout.<br/>
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getparam|getparam]] #''
 
−
| style="text-align: left; vertical-align: top;" | Returns selected parameter value, # param [[FMA Device Family Parameter list|ID]].
 
−
| style="text-align: left; vertical-align: top;" | Yes
 
−
|-
 
−
! style="text-align: left; vertical-align: top;" | ''[[FMA getparam 1271 X/212 X|getparam 1271 X]]''
 
 
| style="text-align: left; vertical-align: top;" | X values can be 1,2,3.   
 
| style="text-align: left; vertical-align: top;" | X values can be 1,2,3.   
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setparam|setparam]] # #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB setparam|setparam]] #:#''
 
| style="text-align: left; vertical-align: top;" | Sets selected parameter value.<br/>
 
| style="text-align: left; vertical-align: top;" | Sets selected parameter value.<br/>
 
1.# - ID value.<br/>
 
1.# - ID value.<br/>
Line 93: Line 83:
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA flush|flush]] #,#,#,#,#,#,#''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB flush|flush]] #,#,#,#,#,#,#''
 
| style="text-align: left; vertical-align: top;" | Initiates all data sending to specified target server.<br/>
 
| style="text-align: left; vertical-align: top;" | Initiates all data sending to specified target server.<br/>
 
1.# - IMEI.<br/>
 
1.# - IMEI.<br/>
Line 102: Line 92:
 
6.# - PORT.<br/>
 
6.# - PORT.<br/>
 
7.# - MODE (0-TCP/1-UDP).
 
7.# - MODE (0-TCP/1-UDP).
 +
| style="text-align: left; vertical-align: top;" | No
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''deleterecords''
 +
| style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH
 +
| style="text-align: left; vertical-align: top;" | Yes
 +
|-
 +
! style="{{{hide_setdigout|}}}text-align: left; vertical-align: top;" | {{{cmd_setdigout|''[[FMB setdigout|setdigout]] ## Y1 Y2''}}}
 +
| style="{{{hide_setdigout|}}}text-align: left; vertical-align: top;" | Set digital output.{{{txt_setdigout|<br/>
 +
1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>
 +
2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>
 +
Y1 – timeout value for DOUT1 if needed (in seconds).<br/>
 +
Y2 – timeout value for DOUT2 if needed (in seconds).}}}
 +
| style="text-align: left; vertical-align: top;" | Yes
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''[[FMB battery|setdigout X Z Y]]''
 +
| style="text-align: left; vertical-align: top;" |  set selected digital output<br/>
 +
X – number of Digital output (1 – digital output 1; 2 – digital output 2).<br/>
 +
Z – activate(1)/deactivate(0).<br/ >
 +
Y – activation/deactivation timeout.<br/>
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA readops|readops]] #''
+
! style="text-align: left; vertical-align: top;" | ''readops''
 
| style="text-align: left; vertical-align: top;" | 1 – send first 20 operator codes<br/>
 
| style="text-align: left; vertical-align: top;" | 1 – send first 20 operator codes<br/>
−
2 – send from 21<sup>st</sup> to 40<sup>th</sup> operator codes.<br/>
+
2 – send from 21st to 40th operator codes.<br/>
 
3 – send all other operator codes.
 
3 – send all other operator codes.
−
| style="text-align: left; vertical-align: top;" | No
+
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA sn|sn]] #''
+
! style="text-align: left; vertical-align: top;" | ''tuscias''
−
| style="text-align: left; vertical-align: top;" | Static navigation, 1 – enable, 0 – disable
+
| style="text-align: left; vertical-align: top;" | Load default configuration.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA banlist|banlist]] #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB setkey|setkey]] # #''
−
| style="text-align: left; vertical-align: top;" | Banned operators information.
+
| style="text-align: left; vertical-align: top;" | Add new or change current configuration keyword.<br/>
 +
1.# - old keyword (if adding new keyword space).<br/>
 +
2.# - new keyword.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA crashlog|crashlog]] #''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB delkey|delkey]] #''
−
| style="text-align: left; vertical-align: top;" | Device last information before unexpected reset.
+
| style="text-align: left; vertical-align: top;" | Remove existing keyword.<br/>
 +
1.# - old keyword.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''delete_all_sms''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB bbread|tuscias]] #''
−
| style="text-align: left; vertical-align: top;" | Deletes all SMS
+
| style="text-align: left; vertical-align: top;" | Return black box information (HEX value of event ID and HEX value of custom data field (optional)).<br/>
−
| style="text-align: left; vertical-align: top;" | No
+
1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.
 +
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA lvcangetprog|lvcangetprog]]''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB bbinfo|tuscias]] #''
−
| style="text-align: left; vertical-align: top;" | CAN Program Number request by SMS
+
| style="text-align: left; vertical-align: top;" | Return same information as bbread command but additional all events timestamp is written in HEX.<br/>
 +
1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA lvcansetprog |lvcansetprog]] #''
+
! style="text-align: left; vertical-align: top;" | ''tuscias''
−
| style="text-align: left; vertical-align: top;" | Set LVCAN program number.
+
| style="text-align: left; vertical-align: top;" | Format SD card.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA lvcangetinfo|lvcangetinfo]]''
+
|}
−
| style="text-align: left; vertical-align: top;" | Get LV-CAN info by SMS.
+
 
−
| style="text-align: left; vertical-align: top;" | Yes
+
{{{sect_features|{{Template:FMB Features SMS/GRPS commands}}}}}
 +
 
 +
==Commands related to Bluetooth==
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 150px; background: black; color: white;" | Command
 +
! style="width: 500px; background: black; color: white;" | Description
 +
! style="width: 50px; background: black; color: white;" | Response
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''getcontsens''
+
! style="text-align: left; vertical-align: top;" | ''[[FMB btgetlist|btgetlist]] #''
−
| style="text-align: left; vertical-align: top;" | Get IDs of connected temperature sensors.
+
| style="text-align: left; vertical-align: top;" | Returns requested Bluetooth list. <br/># - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected).
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA faultcode|faultcode]]''
+
! style="text-align: left; vertical-align: top;" | ''btscan''
−
| style="text-align: left; vertical-align: top;" | Read DTC
+
| style="text-align: left; vertical-align: top;" | Starts Bluetooth scan.
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA setkey|setkey]] # #''
+
! style="text-align: left; vertical-align: top;" | ''btvisible #''
−
| style="text-align: left; vertical-align: top;" | Add new or change current configuration keyword.<br/>
+
| style="text-align: left; vertical-align: top;" | Sets Bluetooth to visible with TMO. <br/># - visibility TMO (from 1 to 255 seconds).
−
1.# - old keyword (if adding new keyword space).<br/>
 
−
2.# - new keyword.
 
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA delkey|delkey]] #''
+
! style="text-align: left; vertical-align: top;" | ''btrelease #''
−
| style="text-align: left; vertical-align: top;" | Delete configuration keyword.
+
| style="text-align: left; vertical-align: top;" | Disconnects from current device and pauses auto connect functionality for TMO. <br/># - none or TMO (from 1 to 255 seconds).
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''[[FMA dtcinfo|dtcinfo]] #''
+
! style="text-align: left; vertical-align: top;" | ''btunpair #''
−
| style="text-align: left; vertical-align: top;" | DTC information.
+
| style="text-align: left; vertical-align: top;" | Unpair Bluetooth device. <br/># - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).
 
| style="text-align: left; vertical-align: top;" | Yes
 
| style="text-align: left; vertical-align: top;" | Yes
 
|-
 
|-
 
|}
 
|}
 +
 +
{{{sect_obd|{{Template:FMB OBD SMS/GRPS commands}}}}}
 +
 +
{{{sect_can|{{Template:FMB CAN SMS/GRPS commands}}}}}

Revision as of 12:26, 22 August 2018


Read chapter 5.10 to know how to construct a proper SMS message and send it to FMA1YX device. All commands are case sensitive. While FMA1YX operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FMA1YX device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FMA1YX will receive the SMS when it wakes up (exits deep sleep mode).


SMS command list

Command Description Response
getinfo Device runtime system information. Yes
getver Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address. Yes
getstatus Modem Status information. Yes
getgps Current GPS data, date and time. Yes
getio Readout analog input,digital input and output. Yes
ggps Returns location information with Google maps link. Yes
readio # Returns IO status, # AVL ID. Yes
cpureset Resets device. No
getweektime Current device time, Day of Week and amount of minutes passed since start of week Yes
getops List of currently available GSM operator Yes
getcfgtime Date and Time of last successful configuration Yes
resetprof Reset all FLASH1 profile configuration to default profile No
getparam # Returns selected parameter value, # param ID. Yes
getparam 1271 X X values can be 1,2,3. Yes
setparam #:# Sets selected parameter value.

1.# - ID value.
2.# - New first Parameter Value.

 Yes
flush #,#,#,#,#,#,# Initiates all data sending to specified target server.

1.# - IMEI.
2.# - APN.
3.# - LOGIN.
4.# - PASS.
5.# - IP.
6.# - PORT.
7.# - MODE (0-TCP/1-UDP).

No
deleterecords Delete all records saved on FLASH Yes
setdigout ## Y1 Y2 Set digital output.

1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.
2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.
Y1 – timeout value for DOUT1 if needed (in seconds).
Y2 – timeout value for DOUT2 if needed (in seconds).

Yes
setdigout X Z Y set selected digital output

X – number of Digital output (1 – digital output 1; 2 – digital output 2).
Z – activate(1)/deactivate(0).
Y – activation/deactivation timeout.

 Yes
readops 1 – send first 20 operator codes

2 – send from 21st to 40th operator codes.
3 – send all other operator codes.

Yes
tuscias Load default configuration. Yes
setkey # # Add new or change current configuration keyword.

1.# - old keyword (if adding new keyword space).
2.# - new keyword.

Yes
delkey # Remove existing keyword.

1.# - old keyword.

Yes
tuscias # Return black box information (HEX value of event ID and HEX value of custom data field (optional)).

1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.

Yes
tuscias # Return same information as bbread command but additional all events timestamp is written in HEX.

1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.

Yes
tuscias Format SD card. Yes

Commands related to features

Command Description Response
fc_reset Resets fuel consumption parameters. Yes
towingreact Towing reactivation. Yes
auto_calibrate:set Calibrate position if car accelerate straight to > 30 km/h for 5 sec. Yes
auto_calibrate:get Returns the state of calibration. Yes
odoset:# Set total odometer value.
# - new odometer value in km. 		Yes
odoget Display current odometer value. Yes
on_demand_trackingX X=0 – Stops Tracking on Demand functionality.
X=1 – Starts Tracking on Demand functionality.
X=2 – Generates one high priority record and inititates data sending to server.
 Yes

Commands related to Bluetooth

Command Description Response
btgetlist # Returns requested Bluetooth list.
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected). 		Yes
btscan Starts Bluetooth scan. Yes
btvisible # Sets Bluetooth to visible with TMO.
# - visibility TMO (from 1 to 255 seconds). 		Yes
btrelease # Disconnects from current device and pauses auto connect functionality for TMO.
# - none or TMO (from 1 to 255 seconds). 		Yes
btunpair # Unpair Bluetooth device.
# - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address). 		Yes

Commands related to OBD

Command Description Response
obdinfo If connected with Blue-tooth OBD dongle displays all available information from OBD. Yes
faultcodes If connected with Blue-tooth OBD dongle display all visible fault codes. Yes
cleardtc Clears all vehicle stored fault codes. No
getvin Get vehicle VIN code, if OBD dongle is connected. Yes

Commands related to LV-CAN200/ALL-CAN300

Command Description Response
lvcansetprog # Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX.
# three digit number that identity vehicle. 		Yes
lvcansimpletacho # Add or remove simpletacho start byte.
# - 0 or 1 (0 – don’t add start byte, 1 – add start byte). 		No
lvcangetprog Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. Yes
lvcangetinfo Get information about connected LV-CAN200/ALL-CAN300. Yes
lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. 		Yes
allcanmode Turn on ALL-CAN300 mode. Yes
lvcanmode Turn on LV-CAN200 mode. Yes
lvcanfaultcodes Read DTC fault codes. Yes
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMA_SMS/GPRS_command_list&oldid=17560"