Template:FMB0 First start card: Difference between revisions

← Older edit

VisualWikitext

Latest revision as of 12:31, 13 September 2019

Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

How to insert Micro-SIM card and connect battery

Gently remove FMB1YX cover using plastic pry tool from both sides.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
Attach device cover back.

Device is ready to be connected.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert SD card into FMB1YX

Insert SD card as shown.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.

@@ Line 1: / Line 1: @@
 [[Image:Qsg_rut950_teltonika.PNG|centre]]
-<b><font size="+10">{{{model|FMB1YX}}} GNSS/GSM/Bluetooth tracker with {{{antenna|GNSS/GSM antennas}}} and internal battery</font></b>
-<font size="+3">Quick Start Guide</font> {{{pic|[[Image:Fmb001 man.png|600px|right]]}}}
+<b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity}}}</b>{{{pic|[[Image:FMB001_00_demo.png|400px|right]]}}}
+__TOC__
+=='''How to insert Micro-SIM card and connect battery'''==
+# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read  '''{{{sim_pin|[[FMB001 Security info|Security info]]}}}''' how to enter it later in '''Configurator'''. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot.
+# Connect battery as shown to device. Position the battery in place where it does '''not obstruct other components'''.
+# Attach device '''cover''' back.
+Device is ready to be connected.
+{{{insert1|[[Image:Fmb010_cover_1.png|280px]]}}}{{{insert2|[[Image:Fmb010_cover_2.png|280px]]}}}{{{insert3|[[Image:Fmb010_battery_1.png|280px]]}}}{{{insert4|[[Image:Fmb010_cover_3.png|280px]]}}}
+{|
+|-
+| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+|}
+=='''How to insert SD card into {{{model|FMB1YX}}}'''==
+Insert SD card as shown.
+<br/><b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory.
+{{{sd_card_insert|[[Image:Fmb010_sd_card_0.png|280px]]}}}
-<font size="+3"><span style=color:#104996>'''How to insert micro SIM card into {{{model|FMB1YX}}}'''</span></font>
-<font size="+2"><span style=color:#F49E21> 1. </span> Remove {{{model|FMB1YX}}} cover. </font>
-<font size="+2"><span style=color:#F49E21> 2. </span> Insert SIM card as shown. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one. </font>
-<font size="+2"><span style=color:#F49E21> 3. </span> Attach cover. </font>
-<font size="+2"><span style=color:#F49E21> 4. </span> Device is ready to be connected. </font>
-[[Image:Fmb120_cover_1.png|500px|left]] [[Image:Fmb120_cover_3.png|500px]]
-[[Image:Fmb120_cover_2.png|500px|left]] [[Image:Fmb120_cover_4.png|500px]]
-<font size="+3"><span style=color:#104996>'''How to insert SD card into {{{model|FMB1YX}}}'''</span></font>
-<font size="+2"> Insert SD card as shown. </font>
-[[Image:Fmb010_sd_card_0.png]]