Difference between revisions of "Template:FMB0 First start card"
From Wiki Knowledge Base | Teltonika GPS
Danielekrau (talk | contribs) |
(Undo revision 44769 by Kriauciunas.to (talk)) |
||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 2: | Line 2: | ||
| − | <b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and | + | <b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity}}}</b>{{{pic|[[Image:FMB001_00_demo.png|400px|right]]}}} |
| Line 32: | Line 32: | ||
<br/><b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory. | <br/><b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory. | ||
| − | [[Image:Fmb010_sd_card_0.png|280px]] | + | {{{sd_card_insert|[[Image:Fmb010_sd_card_0.png|280px]]}}} |
Latest revision as of 12:31, 13 September 2019
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity
How to insert Micro-SIM card and connect battery
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
- Attach device cover back.
Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert SD card into FMB1YX
Insert SD card as shown.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.
