| Line 1: |
Line 1: |
| − | K-Line Data monitoring functionality allows user to monitor and use incoming data from Tachograph. Kline periodic record timeout paramater is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as seperate packet.
| + | {{Template:FMB630_K-Line_Data}} |
| − | | + | [[Category:FMB630 Configuration]] |
| − | To configure any K-Line parameter, every parameter should be separated with comma.
| |
| − | For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like:
| |
| − | “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”)
| |
| − | Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“
| |
| − | Other Kline properties can be configured in the same logic.
| |
| − | | |
| − | [[Image:kline_tab.png|none]] | |
