=='''How to insert Micro-SIM card and connect battery'''==
=='''How to insert Micro-SIM card and connect battery'''==
−
# Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
+
# Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.
−
# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
+
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.
−
# Attach the SIM card tray back.
+
# Connect the battery as shown in the figure.
−
# Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
−
# Connect the battery as shown to device.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.