Changes

=='''How to insert Micro-SIM card and connect battery'''==

=='''How to insert Nano-SIM card and connect battery'''==

# Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.

# Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.

# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.

# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.

# Attach the SIM card tray back.

# Connect the battery as shown in the figure.

# Connect the battery as shown to device.

# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.

# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.

Device is ready to be mounted.

 

The device is ready to be mounted.

{|

{|

|-

|-

| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>

| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>

|}

|}