Changes

m
no edit summary
Line 10: Line 10:       −
=='''How to insert Micro-SIM card and connect battery'''==
+
=='''How to insert Nano-SIM card and connect battery'''==
   −
# Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.
+
# Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.
+
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
 
# Connect the battery as shown in the figure.
 
# Connect the battery as shown in the figure.
 
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
 
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
Line 19: Line 19:       −
Device is ready to be mounted.
+
The device is ready to be mounted.
      Line 27: Line 27:  
{|
 
{|
 
|-
 
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 
|}
 
|}