Difference between revisions of "FMP100 User Interface"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "__TOC__ '''Indication''' is configurable in '''User Interface''' tab of configurator or via '''SMS/GPRS parameter ID'''. Each 100 ms device checks if any indication is enabl...")
 
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
  
 +
==User Interface==
  
−
'''Indication''' is configurable in '''User Interface''' tab of configurator or via '''SMS/GPRS parameter ID'''. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source ('''LED''' or '''Vibration''') then the active indicating scenario needs to be finished first (with exception of ''Alarm'' and ''Device Off'' scenarios, which can override the control of indication sources). '''Period''' setting is indicative of ''Periodic'' scenarios and if ''Period'' is set to '''0''' the indication will take place '''immediately'''. When indication is periodic and ''On'' parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on '''LED''' and/or '''Vibration''' for a configured '''On''' duration and then keep them off for a configured '''Off''' period of time. In case the configured ''Repeat'' value is higher than 0 the device continues a periodic on/off cycle. '''Enable In Sleep''' parameter will let the indication work while device is sleeping.
+
In user interface section, you can customize by different needs what kind of indication for the driver should be shown.<br/>
 +
For available event indications, the possible configurable options are available to choose:<br/>
 +
{| class="nd-othertables_2" style="width: 950px"
 +
|+
 +
! style="width: 20%; color: white;" |
 +
! style="width: 80%; color: white;" |
 +
|-
 +
! style="text-align: left; vertical-align: top;" |Column
 +
! style="text-align: left; vertical-align: top;" |Description
 +
|-
 +
| style="text-align: left; vertical-align: top;" |LED
 +
| style="text-align: left; vertical-align: top;" |Possibility to choose indication color between 3 different colors: Red, Green, Blue or none LED indication at all.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |Additional Indication
 +
| style="text-align: left; vertical-align: top;" |Built in buzzer will be activated with the same configured time periods as LED indication.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |Enable In Sleep
 +
| style="text-align: left; vertical-align: top;" |'''Disable''' - When device in sleep mode, indication will not be showed. '''Enable''' - Indication will work while device in sleep mode.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |Period (ms)
 +
| style="text-align: left; vertical-align: top;" |'''Disable''' - Indication will be showed only when event occurs. '''Enable''' - indication will be showed by set period time.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |Period (ms)
 +
| style="text-align: left; vertical-align: top;" |Set in miliseconds after how long the indication should be showed periodically.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |On (ms)
 +
| style="text-align: left; vertical-align: top;" |Set in miliseconds how long the LED or buzzer will be turned on.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |Off (ms)
 +
| style="text-align: left; vertical-align: top;" |Set in miliseconds how long the LED or buzzer will be turned off, while doing event indication.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |Repeat
 +
| style="text-align: left; vertical-align: top;" |Set how many additionally times the event indication should be repeated.
 +
|-
 +
|}
  
 
==GSM Indication==
 
==GSM Indication==
−
[[Image:TMT250 GSM Indication.PNG]]
+
There are 3 different available indications related to GSM work:
−
 
+
{| class="nd-othertables_2" style="width: 950px"
−
{| class="wikitable"
 
 
|+
 
|+
−
! style="width: 190px; background: black; color: white;" | Name
+
! style="width: 20%; color: white;" |
−
! style="width: 600px; background: black; color: white;" | Meaning
+
! style="width: 80%; color: white;" |
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" |Indication
−
| style="text-align: left; vertical-align: top;" | SIM is not inserted, failed to connect to GSM operator or GSM signal is being jammed
+
! style="text-align: left; vertical-align: top;" |Description
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Signal Established
+
| style="text-align: left; vertical-align: top;" |GSM Error
−
| style="text-align: left; vertical-align: top;" | Device successfully registered to GSM network
+
| style="text-align: left; vertical-align: top;" |When there will be error with GSM signal (no signal) indication will be showed.
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | SMS Send/Receive
+
| style="text-align: left; vertical-align: top;" |GSM Signal Established
−
| style="text-align: left; vertical-align: top;" | SMS is received or sent
+
| style="text-align: left; vertical-align: top;" |Event will be showed when device connects to GSM network.
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | Incoming Call
+
| style="text-align: left; vertical-align: top;" |Outgoing call
−
| style="text-align: left; vertical-align: top;" | Device notices incoming call
+
| style="text-align: left; vertical-align: top;" |Outgoing call in progress.
−
|-
 
−
! style="text-align: left; vertical-align: top;" | Remote Connection
 
−
| style="text-align: left; vertical-align: top;" | Device establishes connection with the server
 
 
|-
 
|-
 
|}
 
|}
 +
 +
[[Image:GSM Indication.png]]
 +
 +
Note: Periodic part can't be configured and preset needs to be used.
  
 
==GNSS Indication==
 
==GNSS Indication==
−
[[Image:TMT250 GNSS Indication.PNG]]
+
There are 2 different available indication related to GNSS work:
−
 
+
{| class="nd-othertables_2" style="width: 950px"
−
{| class="wikitable"
 
 
|+
 
|+
−
! style="width: 190px; background: black; color: white;" | Name
+
! style="width: 20%; color: white;" |
−
! style="width: 600px; background: black; color: white;" | Meaning
+
! style="width: 80%; color: white;" |
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | No GPS Fix
+
! style="text-align: left; vertical-align: top;" |Indication
−
| style="text-align: left; vertical-align: top;" | Device searches for valid GPS fix
+
! style="text-align: left; vertical-align: top;" |Description
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GPS Fix
+
| style="text-align: left; vertical-align: top;" |No GPS Fix
−
| style="text-align: left; vertical-align: top;" | Device has valid GPS fix
+
| style="text-align: left; vertical-align: top;" |When the GPS Fix is not available, configured indication will be showed.
 +
|-
 +
| style="text-align: left; vertical-align: top;" |GPS Fix
 +
| style="text-align: left; vertical-align: top;" |When GPS Fix is available, configured indication will be showed.
 
|-
 
|-
 
|}
 
|}
 +
 +
[[Image:GNSS Indication.png]]
 +
 +
Note: Periodic part can't be configured and preset needs to be used.
  
 
==Event Indication==
 
==Event Indication==
−
[[Image:TMT250 Event Indication.PNG]]
+
There are 5 different available indication related to events:
−
 
+
{| class="nd-othertables_2" style="width: 950px"
−
{| class="wikitable"
 
 
|+
 
|+
−
! style="width: 190px; background: black; color: white;" | Name
+
! style="width: 20%; color: white;" |
−
! style="width: 650px; background: black; color: white;" | Meaning
+
! style="width: 80%; color: white;" |
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | Event
+
! style="text-align: left; vertical-align: top;" |Indication
−
| style="text-align: left; vertical-align: top;" | Eventual record is saved
+
! style="text-align: left; vertical-align: top;" |Description
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | Panic Event
+
| style="text-align: left; vertical-align: top;" |Sleep mode
−
| style="text-align: left; vertical-align: top;" | Panic record is saved
+
| style="text-align: left; vertical-align: top;" |Indicates if device is working in sleep mode
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | Device Off
+
| style="text-align: left; vertical-align: top;" |Key pressed
−
| style="text-align: left; vertical-align: top;" | Device is turning off
+
| style="text-align: left; vertical-align: top;" |Indicates if button was pressed
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | Device On
+
| style="text-align: left; vertical-align: top;" |Private Trip
−
| style="text-align: left; vertical-align: top;" | Device is turning on
+
| style="text-align: left; vertical-align: top;" |Indication will be on when Private trip is active
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | Pre Alarm
+
| style="text-align: left; vertical-align: top;" |Business Trip
−
| style="text-align: left; vertical-align: top;" | Indication when Man-down or No Movement event functionality starts counting timeout till event
+
| style="text-align: left; vertical-align: top;" |Indication will be on when Business trip is active
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | I Am Alive
+
| style="text-align: left; vertical-align: top;" |Alarm
−
| style="text-align: left; vertical-align: top;" | Periodical indication that device is on
+
| style="text-align: left; vertical-align: top;" |At Alarm event, indication will be turned on
−
|-
 
−
! style="text-align: left; vertical-align: top;" | Sleep Mode
 
−
| style="text-align: left; vertical-align: top;" | Device is in sleep mode
 
 
|-
 
|-
 
|}
 
|}
  
 +
[[Image:Event indication.png]]
 +
 +
Note: Some parameter can't be configured and presets needs to be used.
  
−
'''Note!''' three LED colors are available - ''Green'', ''Red'' and ''Blue''. Indications are fully customizable depending on the user needs.
+
[[Category:FMP100 Configuration]]
−
<!--[[Category:FMP100 Configuration]]-->
 

Latest revision as of 10:19, 6 January 2021

Main Page > Fast & Easy Trackers > FMP100 > FMP100 Manual > FMP100 Configuration > FMP100 User Interface

User Interface

In user interface section, you can customize by different needs what kind of indication for the driver should be shown.
For available event indications, the possible configurable options are available to choose:

Column Description
LED Possibility to choose indication color between 3 different colors: Red, Green, Blue or none LED indication at all.
Additional Indication Built in buzzer will be activated with the same configured time periods as LED indication.
Enable In Sleep Disable - When device in sleep mode, indication will not be showed. Enable - Indication will work while device in sleep mode.
Period (ms) Disable - Indication will be showed only when event occurs. Enable - indication will be showed by set period time.
Period (ms) Set in miliseconds after how long the indication should be showed periodically.
On (ms) Set in miliseconds how long the LED or buzzer will be turned on.
Off (ms) Set in miliseconds how long the LED or buzzer will be turned off, while doing event indication.
Repeat Set how many additionally times the event indication should be repeated.

GSM Indication

There are 3 different available indications related to GSM work:

Indication Description
GSM Error When there will be error with GSM signal (no signal) indication will be showed.
GSM Signal Established Event will be showed when device connects to GSM network.
Outgoing call Outgoing call in progress.

GSM Indication.png

Note: Periodic part can't be configured and preset needs to be used.

GNSS Indication

There are 2 different available indication related to GNSS work:

Indication Description
No GPS Fix When the GPS Fix is not available, configured indication will be showed.
GPS Fix When GPS Fix is available, configured indication will be showed.

GNSS Indication.png

Note: Periodic part can't be configured and preset needs to be used.

Event Indication

There are 5 different available indication related to events:

Indication Description
Sleep mode Indicates if device is working in sleep mode
Key pressed Indicates if button was pressed
Private Trip Indication will be on when Private trip is active
Business Trip Indication will be on when Business trip is active
Alarm At Alarm event, indication will be turned on

Event indication.png

Note: Some parameter can't be configured and presets needs to be used.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMP100_User_Interface&oldid=61791"