FMP100 User Interface

From Wiki Knowledge Base | Teltonika GPS
Main Page > Easy Trackers > FMP100 > FMP100 Manual > FMP100 Configuration > FMP100 User Interface

User Interface[edit | edit source]

In user interface section, you can customize by different needs what kind of indication for the driver should be shown.
For available event indications, the possible configurable options are available to choose:

Column Description
LED Possibility to choose indication color between 3 different colors: Red, Green, Blue or none LED indication at all.
Additional Indication Built in buzzer will be activated with the same configured time periods as LED indication.
Enable In Sleep Disable - When device in sleep mode, indication will not be showed. Enable - Indication will work while device in sleep mode.
Period (ms) Disable - Indication will be showed only when event occurs. Enable - indication will be showed by set period time.
Period (ms) Set in miliseconds after how long the indication should be showed periodically.
On (ms) Set in miliseconds how long the LED or buzzer will be turned on.
Off (ms) Set in miliseconds how long the LED or buzzer will be turned off, while doing event indication.
Repeat Set how many additionally times the event indication should be repeated.

GSM Indication[edit | edit source]

There are 3 different available indications related to GSM work:

Indication Description
GSM Error When there will be error with GSM signal (no signal) indication will be showed.
GSM Signal Established Event will be showed when device connects to GSM network.
Outgoing call Outgoing call in progress.

GSM Indication.png

Note: Periodic part can't be configured and preset needs to be used.

GNSS Indication[edit | edit source]

There are 2 different available indication related to GNSS work:

Indication Description
No GPS Fix When the GPS Fix is not available, configured indication will be showed.
GPS Fix When GPS Fix is available, configured indication will be showed.

GNSS Indication.png

Note: Periodic part can't be configured and preset needs to be used.

Event Indication[edit | edit source]

There are 5 different available indication related to events:

Indication Description
Sleep mode Indicates if device is working in sleep mode
Key pressed Indicates if button was pressed
Private Trip Indication will be on when Private trip is active
Business Trip Indication will be on when Business trip is active
Alarm At Alarm event, indication will be turned on

Event indication.png

Note: Some parameter can't be configured and presets needs to be used.