3,234
edits
Changes
Template:Magnetic Card Functionality (view source)
Revision as of 14:14, 21 April 2021
, 14:14, 21 April 2021→Authorization for immobilizer scenario
Magnetic card functionality parameter appearance is shown in ''Figure 1.'' The Other vehicle type ID
Magnetic card functionality parameter appearance is shown in ''Figure 1.'' The Other vehicle type ID
is displayed only if '''Vehicle type''' is selected as '''Other''' This field allows configuring custom vehicle types
is displayed only if '''Vehicle type''' is selected as '''Other''' This field allows configuring custom vehicle types
see chapter '''Custom vehicle types'''.
see chapter [[Custom_Vehicle_Types|Custom Vehicle Types]].
<br>
<br>
====Vehicle use type====
====Vehicle use type====
On initial configuration, the parameters '''Vehicle type''' and '''Vehicle use type''' are set to '''None'''. This
On initial configuration, the parameters '''Vehicle type''' and '''Vehicle use type''' are set to '''None'''. This
allows the vehicle to be started via immobilizer scenario with any license type (if immobilizer is enabled) enabled). If
allows the vehicle to be started via immobilizer scenario with any license type (if the immobilizer is enabled) enabled). If
any other options are used for '''Vehicle type''' and '''Vehicle use type''', ''Table 1'' is used to lookup authorization
any other options are used for ''' Vehicle type''' and '''Vehicle use type''', ''Table 1'' is used to lookup authorization
with regards to driver's license type.
with regards to driver's license type.
====Buzzer Control====
====Buzzer Control====
Different buzzers can be controlled when unauthorized cards are swiped see chapter Driver state
Different buzzers can be controlled when unauthorized cards are swiped see chapter Driver state
logic for a specific or infinite amount of time:
the logic for a specific or infinite amount of time:
<br>
<br>
• DOUT1 or DOUT2 are simply turned on for the amount of time configured<br>
• DOUT1 or DOUT2 are simply turned on for the amount of time configured<br>
• Integrated uses built in buzzer in tracking device<br>
• Integrated uses built-in buzzer in tracking device<br>
• Reader uses built in buzzer in the magnetic card reader (if supports buzzer control command)<br>
• Reader uses built-in buzzer in the magnetic card reader (if supports buzzer control command)<br>
==Authorization for immobilizer scenario==
==Authorization for immobilizer scenario==
====Type of card parameter====
Introduced from firmware version '''FMB.Ver.03.27.01.Rev.163+'''.
This parameter determines if the vehicle can be started based on card type. If the card type matches the configured parameter and the vehicle can be started based on user configuration, then the scenario allows entering the registered state. Also, if the vehicle is authorized to start (the device is in a registered state), then the card which is not allowed will cause deregistration if swiped.
Based on parameters '''Vehicle type''', '''Vehicle use type''','''Vehicle additional information''', ''Table 1''
Based on parameters '''Vehicle type''', '''Vehicle use type''','''Vehicle additional information''', ''Table 1''
{| class="wikitable mw-collapsible"
{| class="wikitable mw-collapsible"
|+Table 1 Authorization to start vehicle depending on license and vehicle type
|+Table 1 Authorization to start vehicle depending on license and vehicle type
! colspan="2" |Vehicle type
! style="background: #0054A6; color:white"; colspan="2" |Vehicle type
!B.1
!style="background: #0054A6; color:white" | B.1
!B.2
!style="background: #0054A6; color:white" | B.2
!B.3
!style="background: #0054A6; color:white" | B.3
!B.4
!style="background: #0054A6; color:white" | B.4
!T.1
!style="background: #0054A6; color:white" | T.1
!T.2
!style="background: #0054A6; color:white" | T.2
!T.3
!style="background: #0054A6; color:white" | T.3
!T.4
!style="background: #0054A6; color:white" | T.4
|-
|-
! rowspan="2" |Special Airconditioned Bus
! rowspan="2" |Special Airconditioned Bus
<br>
<br>
If the '''Vehicle type''' is configured as '''Other''', then the decision of whether the vehicle can be started or not is made by using the table located in '''Custom vehicle types''' tab.
If the '''Vehicle type''' is configured as '''Other''', then the decision of whether the vehicle can be started or not is made by using the table located in [[Custom_Vehicle_Types|Custom Vehicle Types]] tab.
==Driver State Logic==
==Driver State Logic==