Line 713: |
Line 713: |
| *When the CAN-BUS enters sleep mode, the SIMPLE-CAN device also enters sleep mode and takes 1.6mA @ 12V. In the sleep mode LED does not shine. | | *When the CAN-BUS enters sleep mode, the SIMPLE-CAN device also enters sleep mode and takes 1.6mA @ 12V. In the sleep mode LED does not shine. |
| *If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.--> | | *If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.--> |
| + | |
| + | {| class="wikitable" style="font-size:small;" |
| + | |- |
| + | ! Byte |
| + | ! Bit |
| + | ! Value bitmasks |
| + | ! LVCAN |
| + | ! ALLCAN |
| + | ! CAN-CONTROL |
| + | |- |
| + | | 0 |
| + | | 0 |
| + | | 0x00 – CAN1 connected, currently no data is received0x01 – CAN1 connected, currently data is received0x02 – CAN1 not connected, needs connection0x03 – CAN1 not connected does not need connection |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 0 |
| + | | 2 |
| + | | 0x00 – CAN2 connected, currently no data is received0x01 – CAN2 connected, currently data is received0x02 – CAN2 not connected, needs connection0x03 – CAN2 not connected does not need connection |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 0 |
| + | | 4 |
| + | | 0x00 – CAN3 connected, currently no data is received0x01 – CAN3 connected, currently data is received0x02 – CAN3 not connected, needs connection0x03 – CAN3 not connected does not need connection |
| + | | |
| + | | |
| + | | ✔ |
| + | |- |
| + | | 1 |
| + | | 8 |
| + | | 0x01 – ignition on |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 1 |
| + | | 9 |
| + | | 0x02 – key in ignition lock |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 1 |
| + | | 10 |
| + | | 0x04 – webasto |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 1 |
| + | | 11 |
| + | | 0x08 – engine is working |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 1 |
| + | | 12 |
| + | | 0x10 – standalone engine |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 1 |
| + | | 13 |
| + | | 0x20 – ready to drive |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 1 |
| + | | 14 |
| + | | 0x40 – engine is working on CNG |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 1 |
| + | | 15 |
| + | | 0x80 – work mode (0 – private, 1 – company) |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 2 |
| + | | 16 |
| + | | 0x01 – operator is present |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 2 |
| + | | 17 |
| + | | 0x02 – interlock active |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 2 |
| + | | 18 |
| + | | 0x04 – handbrake is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 2 |
| + | | 19 |
| + | | 0x08 – footbrake is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 2 |
| + | | 20 |
| + | | 0x10 – clutch is pushed |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 2 |
| + | | 21 |
| + | | 0x20 – status of the hazard warning lights switch active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 2 |
| + | | 22 |
| + | | 0x40 – front left door opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 2 |
| + | | 23 |
| + | | 0x80 – front right door opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 24 |
| + | | 0x01 – rear left door opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 25 |
| + | | 0x02 – rear right door opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 26 |
| + | | 0x04 – trunk door opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 27 |
| + | | 0x08 – engine cover opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 28 |
| + | | 0x10 – charging wire is plugged |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 29 |
| + | | 0x20 – battery charging on |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 30 |
| + | | 0x40 – electric engine is working |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 3 |
| + | | 31 |
| + | | 0x80 – car is closed with factory remote control |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 32 |
| + | | 0x01 – car is closed |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 33 |
| + | | 0x02 – factory installed alarm is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 34 |
| + | | 0x04 – emulated alarm is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 35 |
| + | | 0x08 – signal of closing with factory remote control was sent |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 36 |
| + | | 0x10 – signal of opening with factory remote control was sent |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 37 |
| + | | 0x20 – rearm signal was sent |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 38 |
| + | | 0x40 – trunk was opened with remote control |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 4 |
| + | | 39 |
| + | | 0x80 – CAN module is in SLEEP mode |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 40 |
| + | | 0x01 – signal of closing with factory remote control was sent 3 times |
| + | | |
| + | | ✔ |
| + | | |
| + | |- |
| + | | 5 |
| + | | 41 |
| + | | 0x02 – parking is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 42 |
| + | | 0x04 – reverse is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 43 |
| + | | 0x08 – neutral is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 44 |
| + | | 0x10 – drive is active |
| + | | |
| + | | ✔ |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 45 |
| + | | 0x20 – engine lock active |
| + | | |
| + | | |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 46 |
| + | | 0x40 – request to lock the engine (activation after attempt to restart the engine) |
| + | | |
| + | | |
| + | | ✔ |
| + | |- |
| + | | 5 |
| + | | 47 |
| + | | 0x80 – factory armed (only 03.25.16.Rev.280, 03.25.16.Rev.290) |
| + | | |
| + | | |
| + | | ✔ |
| + | |- |
| + | | 6 |
| + | | 48 |
| + | | 0x01 - roof opened |
| + | | ✔ |
| + | | ✔ |
| + | | ✔ |
| + | |} |