Difference between revisions of "EYE SENSOR / BTSMP1"

Revision as of 10:39, 1 September 2022

Main Page > Sensors > EYE SENSOR / BTSMP1

Introduction

Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.

About BTSMP1

Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement, pitch and roll of the device. Magnet detection can be used for wireless open/close detection and notifications such as trailer door events, etc. EYE sensor supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika mobile app

Product Specification

Features


Functionalities
Beacon ID, LED, Temperature, Humidity, Accelerometer, Magnet detection


Dimensions and weight
Dimensions	56,6 mm x 38 mm x 13 mm
Weight	18g


Battery and power
Model	CR2450
Type	Type Lithium, Manganese Dioxide
Total Capacity	600 mAh
Replaceable	No
Battery life (Tx=2 dBm; interval: 3 s)	2.5+ years
Battery life (Tx=2 dBm; interval: 5 s), default	4+ years
Battery life (Tx=2 dBm; interval: 10 s)	5+ years


Connectivity
Bluetooth	Bluetooth 4.2 compliant, Bluetooth 5.2 certified
Range	80 m
Available transmission power levels	Up to 8 dBm
Sensitivity	-88 dBm


Casing
Protection	IP67
Mounting	Two holes to screw/leash/strip, tape
Customization	Custom logo upon request (Special conditions)


Environmental Requirements
Humidity (non-condensing)	From 0% to 100%
Operational temperature	-20°C / +60°C (-4°F / +140°F)


Protocols compatibility
iBeacon	Yes *iOS doesn't show devices with iBeacon protocol
Eddystone	Yes
EYE Sensor	Yes

Dimensions

Mounting recomendations

EYE App Configuration

Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
• Transmitting at 2 dBm power.
• Data advertising at 1 second intervals.
• Eddystone and Sensors protocol

If you would like to change these settings you will need to:
1) Download and install EYE APP - Teltonika application to change sensor settings.

Eye App Overview

With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.

Devices in view

In this window you will see all visible devices. You have options to see devices in Short list or in default list. When looking at devices in default list you will be able to open Detailed view of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you will be able to use Search function to filter search options. When in this window select a device of your choice to connect and after passing pin code (default pin code is 123456) you will go to device overview window.

Overview window

In overview window you can see device details, check firmware version and update if available , go to device configuration settings. If you select to Configure device new window will open with Basic and Advanced settings.

Configure window

In this window you can check and change device configuration settings. In main tab Basic Settings you can change main settings. Change Device name, Power signal strength, Advertising interval and Packet transmission type*. For more settings go to Advanced settings tab to enable various events.

Advanced configuration window

Advanced configuration: Beacon Settings

In Advanced settings tab you can can configure EYE beacon sensor parameters: Beacon information (iBeacon ID*, Eddystone ID). UUID/MINOR/MAJOR parameter can be changed for iBeacon ID*. Namespace ID/Instance ID can be changed for Eddystone ID. If you scroll down you will be able to adjust Sensor reading interval and event settings of the EYE Sensor Note: iOS doesn't show devices with iBeacon protocol

Advanced configuration: Sensor reading and events


Magnetic field event - adjust if the device generates events based on detection or exit (loss) of the magnet.	Humidity event - adjust if the device generates events based on entrance or exit to selected humidity range	Temperature event - adjust if the device generates events based on entrance or exit to selected temperature range	Movement event - adjust movement/stop detection and timeouts it takes to register movement / stopping

Maximum event duration - how long will one event be advertised	Event advertising settings - advertising period after event detection	Sensor reading interval - how often values are updated by the device

FM Tracker Configuration

Teltonika configurator (standard functionality / advanced mode)

If you have firmware / configurator which does not support EYE sensor tab in Bluetooth 4.0 section, then you can still use Avanced BLE configuration to connect with EYE Sensors.

To configure FM with BTSMP1 EYE Sensor:

Requirements:

Firmware/configurator version with multiple custom IO fields per sensor, we recommend:

FMBXXX: 03.27.07.Rev.00/1.7.22_B.3.27_R.21 or newer

FMX640: 01.02.03/1.7.24_B.FM64_R.34 or newer (FMB640 does not support for BLE functionality)

Step 1: Check EYE App Settings:

Make sure that name of the sensor is default length (10 symbols) in EYE App Basic Configuration window
Note what Packet settings you have set in EYE App Basic Configuration window

Step 2: Configure FM device using Teltonika configurator:

In System settings Enable Codec8 Extended;
In GPRS settings Configure GPRS Settings and Server Settings
In Bluetooth settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
In Bluetooth 4.0 settings:
1. set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
2. In Bluetooth 4.0 settings Advanced Mode Settings Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
3. Configure MAC address of the sensor
To receive data to server enable corresponding IO elements in FMB120 I/O settings

Advanced mode configuration:

EYE Sensor Packet Setting:
Preset you should use:	EYE Sensors	EYE iBeacon	EYE Eddystone
FMBXXX Preset download link:
FMBXXX Configuration example download link:
FMX640 Preset download link:
Instructions how you can manually add a preset: link

Preset Configuration:

If EYE Sensor Packet Settings is EYE Sensors or Eddystone and EYE Sensors:

If EYE Sensor Packet Settings is EYE Sensors or iBeacon and EYE Sensors:

IO element value descriptions:


NAME	DESCRIPTION
Custom1	Flags(not supported with curent FMX640 preset)
Temperature	Ambient temperature in Celsius
Humidity	Ambient humidity in percent
Custom2	Movement and movement events count
Custom3	Angle
Custom4	Battery voltage (2000 + (VALUE * 10)) in mV

Property ID in AVL packet	Property name	Bytes	Type	Min	Max	Multiplier	Units	Description
25	BLE Temperature #1	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
26	BLE Temperature #2	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
27	BLE Temperature #3	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
28	BLE Temperature #4	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
86	BLE Humidity #1	2	Unsigned	0	1000	0.1*	%RH	Humidity
104	BLE Humidity #2	2	Unsigned	0	1000	0.1*	%RH	Humidity
106	BLE Humidity #3	2	Unsigned	0	1000	0.1*	%RH	Humidity
108	BLE Humidity #4	2	Unsigned	0	1000	0.1*	%RH	Humidity
331	BLE 1 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
463	BLE 1 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
464	BLE 1 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
465	BLE 1 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
466	BLE 1 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
332	BLE 2 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
467	BLE 2 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
468	BLE 2 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
469	BLE 2 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
470	BLE 2 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
333	BLE 3 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
471	BLE 3 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
472	BLE 3 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
473	BLE 3 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
474	BLE 3 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
334	BLE 4 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
475	BLE 4 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
476	BLE 4 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
477	BLE 4 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
478	BLE 4 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor

Teltonika configurator new functionalities (not released yet)

Starting with firmware 03.27.10.Rev.323 there is additional tabs available in Bluetooth 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.

Bluetooth 4.0
Functionalities were reorganized and transferred to Bluetooth 4.0 configuration tab with additional horizontal tabs selection for specific settings:

Global - Parameters responsible for device scanning ability like power and duratations.
EYE - Parameters to configure data reading from EYE sensors.

Common settings

Non Stop Scan - Enable Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
Sensors and Beacons Update frequency - changes sensors temperature/humidity/battery voltage data update frequency. Minimum value: 30s, maximum value: 65535s. Recommended value 30.
BLE Scan Duration - Sensors data reading time. Recommended value 30.
Scan retries until error - Scan retries count, till start to show the value as Error '3000' - sensor disconnected. Recommended value 30.
BT Power Level - Telematics device Bluetooth power level setting.
BLE Broadcasting service ID - Telematics device can broadcast configured ID.
BLE connection control - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.

EYE Sensor

EYE Sensor functionality allows to configure MAC addresses for 4 sensors that user wants to read
Data clear period - if value equal or higher than 1, it will clear sensors BLE IO elements values if they were not updated for configurated amount of time.

I/O elements
Starting with firmware 03.27.10.Rev.323 there is additional tabs available in Bluetooth 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.
Note: If you are using presets(firmware/configurator without EYE product support), then refer to BLE Sensors I/O elements table instead.

Table below describes I/O elements which were added for EYE sensor and proximity functionalities.

Property ID in AVL packet	Property name	Bytes	Type	Min	Max	Multiplier	Units	Description
10800	EYE Temperature 1	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 1
10801	EYE Temperature 2	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 2
10802	EYE Temperature 3	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 3
10803	EYE Temperature 4	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 4
10804	EYE Humidity 1	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 1
10805	EYE Humidity 2	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 2
10806	EYE Humidity 3	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 3
10807	EYE Humidity 4	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 4
10808	EYE Magnet 1	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 1
10809	EYE Magnet 2	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 2
10810	EYE Magnet 3	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 3
10811	EYE Magnet 4	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 4
10812	EYE Movement 1	2	Unsigned	0	0xFFFF	-	-	Movement state and count measured by EYE sensor 1
10813	EYE Movement 2	2	Unsigned	0	0xFFFF	-	-	Movement state and count measured by EYE sensor 2
10814	EYE Movement 3	2	Unsigned	0	0xFFFF	-	-	Movement state and count measured by EYE sensor 3
10815	EYE Movement 4	2	Unsigned	0	0xFFFF	-	-	Movement state and count measured by EYE sensor 4
10816	EYE Angle 1	4	Unsigned	0	0xFFFFFFFF	-	-	Pitch and Roll angles measured by EYE sensor 1
10817	EYE Angle 2	4	Unsigned	0	0xFFFFFFFF	-	-	Pitch and Roll angles measured by EYE sensor 2
10818	EYE Angle 3	4	Unsigned	0	0xFFFFFFFF	-	-	Pitch and Roll angles measured by EYE sensor 3
10819	EYE Angle 4	4	Unsigned	0	0xFFFFFFFF	-	-	Pitch and Roll angles measured by EYE sensor 4
10820	EYE Low Battery 1	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 1
10821	EYE Low Battery 2	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 2
10822	EYE Low Battery 3	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 3
10823	EYE Low Battery 4	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 4
10824	EYE Battery Voltage 1	1	Unsigned	0	0xFF	-	-	Battery Voltage of EYE sensor 1
10825	EYE Battery Voltage 2	1	Unsigned	0	0xFF	-	-	Battery Voltage of EYE sensor 2
10826	EYE Battery Voltage 3	1	Unsigned	0	0xFF	-	-	Battery Voltage of EYE sensor 3
10827	EYE Battery Voltage 4	1	Unsigned	0	0xFF	-	-	Battery Voltage of EYE sensor 4
10828	EYE Proximity Near	1024	HEX	0	1024	-	-	Beacon list in Near Proximity zone
10829	EYE Proximity Away	1024	HEX	0	1024	-	-	Beacon list in Away Proximity zone
10830	EYE Proximity Far Away	1024	HEX	0	1024	-	-	Beacon list in Away Far zone
10831	EYE Proximity Lost	1024	HEX	0	1024	-	-	List of Beacon which were lost from proximity zones

EYE Sensor Protocol overview

Sensor advertising

Beacon and sensors data

Protocol description

At the highest-level Bluetooth LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.

Scan Response is used to send device name and manufacturer specific data. Manufacturer specific data includes Teltonika Company ID (0x089A) and protocol version (0x01). It is followed by Flag Encoded Data (Table 1) and Extended Data (Table 2). Later on, protocol will be highly configurable in and will allow to disable/enable sending of device name or any sensor value allowing to reduce size of the packet being sent.

Device Name has the following default value for Beacon – ID1_XXXXXXX

**Table 1. Flag Encoded Date**
Data	Size (Bytes)	Description
Flags	1	Each set bit (0-7) means the presence of value (0-7). Bits: 0 – Temperature value presence 1 – Humidity value presence 2 – Magnetic sensor presence 3 – Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set. 4 – Movement sensor counter 5 – Movement sensor angle 6 – Low Battery indication (if set to 1 low battery voltage detected) 7 – Battery voltage value presence
Value 0	2	Temperature Value in Celsius * 100 NOTE: present only if bit 0 is set, otherwise is not being sent
Value 1	1	Humidity Value in percent NOTE: present only if bit 1 is set, otherwise is not being sent
Value 2	2	Movement Sensor counter Most significant bit indicates movement state and 15 least significant bits represent count of movement events. NOTE: present only if bit 4 is set, otherwise is not being sent
Value 3	3	Movement sensor angle Most significant byte – pitch (-90/+90) Two least significant bytes – roll (-180/+180) NOTE: present only if bit 5 is set, otherwise is not being sent
Value 4	1	Battery Voltage Battery voltage in mV = 2000 + VALUE * 10 NOTE: present only if bit 7 is set, otherwise is not being sent

GATT Characteristics

Name	Service UUID	Characteristic UUID	Data Type	Min	Max	Default Value	Notes
Device Name	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0016-7df2-4d4e-8e6d-c611745b92e9	ASCII	0	11	Unique for each device	-
Tx Power Lever	1804	00002a07-0000-1000-8000-00805f9b34fb	SINT8	-14	8	2	Possible values: -14, -11, -8, -5, -2, 2, 4, 8
Protocol Type	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0001-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	4	1 for EYE_Beacon, 4 for EYE_Sensor	0 - iBeacon 1 - EddyStone 2 - EYE Sensor 3 - iBeacon + EYE Sensor 4 - Eddsytone + EYE Sensor
Advertising Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0002-7df2-4d4e-8e6d-c611745b92e9	UINT16	20	10000	1000	miliseconds
Sub Advertising Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0003-7df2-4d4e-8e6d-c611745b92e9	UINT16	20	1000	100	Used by repeats, miliseconds
Advertising Repeats	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0004-7df2-4d4e-8e6d-c611745b92e9	UINT16	1	10	1	Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1
iBeacon ID	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0005-7df2-4d4e-8e6d-c611745b92e9	BYTE ARRAY	20 bytes	20 bytes	Unique for each device	16 B - UUID 2 B - major 2 B - minor
Eddystone ID	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0006-7df2-4d4e-8e6d-c611745b92e9	BYTE ARRAY	16 bytes	16 bytes	Unique for each device	10 B - Namespace 6 B - Instance
Password	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0008-7df2-4d4e-8e6d-c611745b92e9	BYTE ARRAY	4 bytes	4 bytes	123456	Always 6 Digits
Sensor Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0009-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	10000	1000	miliseconds
Event Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000a-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	10000	1000	miliseconds
Event Duration	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000b-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	30	30	seconds
Temperature Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000c-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Temperature Low	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000d-7df2-4d4e-8e6d-c611745b92e9	INT8	-40	85	-20	celsius
Temperature High	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000e-7df2-4d4e-8e6d-c611745b92e9	INT8	-40	85	50	celsius
Humidity Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000f-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Humidity Low	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0010-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	100	15	%
Humidity High	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0011-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	100	50	%
Movement Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0012-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Movement Start	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0013-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	300	5	seconds
Movement Stop	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0014-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	300	5	seconds
Magnetic Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0015-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Manufacturer	180A	2A29	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "Teltonika"
Model	180A	2A24	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "BTSID1"
Serial	180A	2A25	BYTE ARRAY	-	-	Not Configurable	Not used
Hardware	180A	2A27	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "Table:1 Volt:325
Firmware	180A	2A26	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "1.1.0-beta"
System ID	180A	2A23	BYTE ARRAY	-	-	Not Configurable	Not used
MAC	180A	652143dc-dec6-4fb1-bd46-3e919d2410a6	BYTE ARRAY	6	6	Not Configurable	Read Only. ex. 112233445566 -> 11:22:33:44:55:66
Scan Response Data	e61c0000-7df3-4d4e-8e6d-c611745b92e9	e61c0001-7df3-4d4e-8e6d-c611745b92e9	BYTE ARRAY	17	17	Not Configurable	Scan Response Data, see picture for detail view of data structure

EYE Sensor Bluetooth frame parsing example


Unparsed data
0201061AFF4C000215FFFFFFFF0B8C404510C655AAB636EBEFBB700055020C094D50315F313233343536370EFF9A0801B708B4120CCB0BFFC767


Parsed data
Parameter		HEX Code Part	Actual Value
	Length	02
	Type	01
	Flags	06
	Length	1A
	Type	FF
	Apple company identifier (big endian)	4C00
	Beacon type	0215
	UUID	FFFFFFFF0B8C404510C655AAB636EBEF
	Major	BB70
	Minor	0055
	Power	02
	Length	0C
	Type	09
	Device name	4D50315F31323334353637
	Length	0E
	Type	FF
	Teltonika company ID (big endian)	9A08
	Protocol version	01
	Flags	B7	Raw value example 0xB7. Data has to be interpretated as binary value. In this example would be (MSB)1011 0111(LSB) and is parsed from least significant byte(LSB). 0 – Temperature value presence. 1 Means device is reading and transmitting temperature value. 1 – Humidity value presence. 1 Means device is reading and transmitting humidity value. 2 – Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value. 3 – Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set. 4 – Movement sensor counter. 1 Means device is reading and transmitting movement state and count values. 5 – Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values. 6 – Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %. 7 – Battery voltage value presence. 1 Means device is reading and transmitting battery voltage value.
	Temperature	08B4	Raw value example 0x08B4 hex, 2228 dec. Raw value needs to be divided by 100. Real temperature is 22,28 Celsius.
	Humidity	12	Raw value example 0x12 hex, 18 dec. Decimal value is humidity in percent. Humidity 18 %
	Movement	0CCB	(MSB)0000 1100 1100 1011(LSB) binary 0 - Most significant byte(MSB) represents Movement status. In this case device is not moving 0. If it was 1 device is moving. 000 1100 1100 1011 – represent detected movements count 3275 decimal value means device has detected total 3275 movement events,
	Angle	0BFFC7	0B – Most significant byte represents device pitch. Device pitch can be from -90 to 90 degrees. In this example device pitch is 0000 1011 (2's complement) = 11° degrees. FFC7– Two least significant bytes represent device roll. Device roll can be from -180 to 180 degrees. In this example device Roll is 1111 1111 1100 0111 (2's complement) = -57° degrees
	Battery voltage	67	Battery voltage – raw value example 0x67 hex. Decimal value of parameter 103. To calculate battery voltage need to use calculation 2000 + (VALUE * 10). In this case battery voltage value 2000+(103x10)= 3030 mV

FM Packet parsing example (standard functionality / advanced mode)


Unparsed data
Received data in hexadecimal stream: `00000000000000488E010000017CA6B6BFD8010F0E5188209AB482008600A80F0000000` `00006000000020019090400560024000301CF0000001601D00000FF4D01D10000006D00000001014B0001B6010000CF7D`

AVL Data Packet
AVL Data Packet Part		HEX Code Part
	Zero Bytes	00 00 00 00
	Data Field Length	00 00 00 48
	Codec ID	8E (Codec8 Extended)
	Number of Data 1 (Number of Total Records)	01
AVL Data	Timestamp	00 00 01 7C A6 B6 BF D8 (GMT: Friday, 22 October 2021 06:36:07)
	Priority	01
	Longitude	0F 0E 51 88
	Latitude	20 9A B4 82
	Altitude	00 86
	Angle	00 0A
	Satellites	0E
	Speed	00 00
	Event IO ID	00 00
	N of Total ID	00 06
	N1 of One Byte IO	00 00
	N2 of Two Bytes IO	00 02
	ID	00 19 (25 = BLE Temperature #1)
	Value	09 04 (2308=23.08°C)
	ID	00 56 (86 = BLE Humidity #1)
	Value	00 36 (24 %RHT)
	N4 of Four Bytes IO	00 03
	ID	01 CF (463 - BLE 1 Custom #2 = Movement status and movement events count)
	Value	00 00 00 16 (Currently not moving events count 22)
	ID	01 D0 (464 - BLE 1 Custom #3 = Angle )
	Value	00 00 FF 4D (Pitch = 0°, Roll = -179°)
	ID	01 D1 (465 - BLE 1 Custom #4 = Battery Voltage)
	Value	00 00 00 6D (109 = 2000 + 109 * 10 mV = 3090 mV)
	N8 of Eight Bytes IO	00 00
	NX of X Bytes IO	00 01
	N’th IO ID - AVL ID.	01 4B (331 - BLE 1 Custom #1 = Flags)
	Length of Variable Length IO	00 01
	Value of Variable Length IO	B7 = (MSB)11011 0111(LSB) It's parsed from least significant byte(LSB): Bit 0 – Temperature value presence. 1 Means device is reading and transmitting temperature value. Bit 1 – Humidity value presence. 1 Means device is reading and transmitting humidity value. Bit 2 – Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value. Bit 3 – Magnetic sensor state 1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set. Bit 4 – Movement sensor counter. 1 Means device is reading and transmitting movement state and count values. Bit 5 – Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values. Bit 6 – Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %. 7 – Battery voltage value presence. 1 Means device is reading and transmitting battery voltage value.
	Number of Data 2 (Number of Total Records)	01
	CRC-16	00 00 CF 7D

Safety information

This message contains information on how to operate BTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.

2. In case of malfunction contact yours Teltonika account manager or write to technical support team over VIP helpdesk.

Certification & Approvals


Certificates
E-Mark (EU)	YES
FCC (USA)	YES
CE/RED (EU)	YES
RoHS (EU)	YES
REACH (EU)	YES
Anatel(EU) (PR)	YES
IP rating	YES

External Links

Product Page

https://teltonika-gps.com/eye/

Product Change Notifications

The latest Product Change Notifications can be found: Product Change Notifications

Compatibilty with other Teltonika Devices

Teltonika Networks: https://wiki.teltonika-networks.com/view/Bluetooth_EYE_Sensor_and_EYE_Beacon_support

Partner Providers Supporting Software

Frequently asked questions

Documents

Datasheet PDF

Quick Manual PDF

@@ Line 1: / Line 1: @@
 __TOC__
-==<p style="font-size:32px"><span style="color:#0054A6">Introduction</span></p>==
+==<p style="font-size:32px><span style="color:#0054A6">Introduction</span></p>==
-Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.
+Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.
-[[File:BTSMP1-datasheet-2023-12-18.2.png|center|frameless|1157x1157px]]
+[[File:BTSMP1.png|center|frameless|1157x1157px]]
 ==<p style="font-size:32px><span style="color:#0054A6">About BTSMP1</span></p>==
@@ Line 45: / Line 45: @@
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (Tx=2 dBm; interval: 3 s)
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2.5 years
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2.5+ years
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (Tx=2 dBm; interval: 5 s), default
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |4 years
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |4+ years
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Battery life (Tx=2 dBm; interval: 10 s)
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |5 years
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |5+ years
 |}
 {| class="wikitable"
@@ Line 58: / Line 58: @@
 ! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |
 |-
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth®
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth® 4.2 compliant
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth 4.2 compliant,
+Bluetooth 5.2 certified
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Range
@@ Line 113: / Line 114: @@
 ===<p style="font-size:24px><span style="color:#0054A6">Dimensions</span>===
 [[File:Eye dimensions.png]]
-==<p style="font-size:32px><span style="color:#0054A6">Value-adding Features</span></p>==
-===<p style="font-size:24px"><span style="color:#0054A6">EN12830 Certified Model version</span>===
-EN12830 is a European standard specifying the requirements and test methods for temperature recording devices used in the storage, transport, and distribution of chilled, frozen, deep-frozen, and quick-frozen food and other types of products. It ensures these devices meet specific accuracy, resolution, and response time criteria to maintain product safety and quality.
-====<p style="font-size:24px"><span style="color:#0054A6">Benefits of EN12830 Compliance</span>====
-The <big>EYE Sensor '''EN12830 model'''</big> offers significant additional benefits, including:<br>
-* [[BTSMP1 EN12830|EN12830 certificate]], proving reliability and compliance<br>
-* Certified 0.5°C accuracy class across all working ranges (-20 to +60°C).<br>
-* Temperature sensor that is calibrated in an ISO 17025-certified laboratory.<br>
-* Internal memory for storage of temperature readings for up to 345 days.<br>
-* Food-grade casing, compliant with EU and FDA regulations for food contact applications.<br>
-<br>
-All these benefits bring new business opportunities in cold-chain market! You may confidently track such items as:<br>
-[[File:EN12830 tracking goods.png]]
-====<p style="font-size:24px"><span style="color:#0054A6">Value to the end customer</span>====
-EYE Sensor EN12830 benefits a wide range of customers, virtually anyone who works with temperature-sensitive goods. It offers several advantages, such as:<br>
-* Prevent spoilage.<br>
-* Helps to quickly identify temperature deviations and act.<br>
-* Ensures compliance with food safety standards.<br>
-* Makes audits easier.<br>
-* Reduces the risk of penalties for non-compliance.<br>
-* Minimises the risk of fines or rejected shipments.<br>
-* Improves product quality and extends shelf life.<br>
-====<p style="font-size:24px"><span style="color:#0054A6">How to receive temperature data from EN12830 sensors</span>====
-You can download:<br>
-* Current <b>and historical*</b> temperature via FM trackers (* for historic data download, evaluation firmware version 03.29.00.Rev.255 is available by request via HelpDesk).<br>
-* Current <b>and historical</b> temperature via <big>[https://wiki.teltonika-gps.com/view/Teltonika_EN12830_EYE_APP EYE APP EN12830].</big><br>
-* Current <b>and historical</b> temperature via your own application. Download functionality and implementation instructions <big>[[Media:BTSXXXX.EN12830 Functionality Description for Client V1.1.pdf|HERE]]</big>.<br>
-Please note that temperature recording must be enabled beforehand via the same APP.<br>
-[[File:EN12830_how_it_works_V2.png|871x871px]]
-===<p style="font-size:24px"><span style="color:#0054A6">Hibernate mode</span>===
-Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life.
-PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on [https://teltonika-gps.com/products/accessories/sensors-beacons/eye <big>eye page</big>]
-====<p style="font-size:24px"><span style="color:#0054A6">Value of hibernate mode</span>====
-Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life. <br>1. '''Accelerated delivery times:'''
-By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry frontrunner, enhancing your competitive edge.
-. '''Mitigated project risks:'''
-In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.
-====<p style="font-size:24px"><span style="color:#0054A6">How to activate hibernated eye device?</span>====
-Attach any magnet to sleeping device and wait for LED to blink.
-<br>'''NOTE: ANY MAGNET CAN BE USED'''
-<br>[[File:520746 Magnet EYE gif v1.6-min.gif|frameless|684x684px]]
-<br>Now device is discoverable, scannable, connectable via BLE.
-====<p style="font-size:24px"><span style="color:#0054A6">How to send the device to hibernate mode?</span>====
-If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:
-<br>Step 1. While connected and in overview tap "Send device to sleep":
-<br>Step 2. Confirm your selection:
-<br>Step 3. Wait for EYE App to disconnect:
-<br>[[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]]
-====<p style="font-size:24px"><span style="color:#0054A6">Can All devices hibernate?</span>====
-. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.
-. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in [https://teltonika-gps.com/products/accessories/sensors-beacons/eye eye page], for special order codes consult your sales manager.
 ==<p style="font-size:32px><span style="color:#0054A6">Mounting recomendations</span></p>==
@@ Line 195: / Line 122: @@
 Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
 <br>• Transmitting at 2 dBm power.
-<br>• Data advertising at 5 second intervals.
+<br>• Data advertising at 1 second intervals.
 <br>• Eddystone and Sensors protocol
 <br>
@@ Line 207: / Line 134: @@
 {|
 |- align="TOP"
-|[[File:1.1.jpg|537x537px]]
 |
+|[[File:Detailed_list_-_collapsed.png|border|360x640px|none]]
 |
+|[[File:Overview - without update (sensor).png|border|360x640px|none]]
 |
-|[[File:2.1.jpg|537x537px]]
+|[[File:Basic settings.png|right|border|360x640px]]
 |
-|
+|[[File:Advanced settings.png|right|border|360x640px]]
-|
+|}
-|[[File:Correct1.1.png|530x537px]]
-|
-|
-|
-|[[File:4.1.jpg|537x537px]]
-|}
 ==== [[File:Frame 115.png|bottom|frameless|upright=0.2|link=|alt=]] Devices in view ====
 In this window you will see all visible devices. You have options to see devices in Short list [[File:Shortlist.jpg|30px]] or in default list. When looking at devices in default list you will be able to open Detailed view [[File:Detailed.jpg]] of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you will be able to use Search [[File:Search button eye app.jpg|30px]] function to filter search options. When in this window select a device of your choice to connect and after passing pin code (default pin code is 123456) you will go to device overview window.
 ==== [[File:Group 125.png|baseline|frameless|upright=0.2|link=|alt=]]Overview window ====
-In overview window you can see device details, check firmware version and update if available, go to device configuration settings and download the configuration. If you select to Configure device new window will open with Basic and Advanced settings. Other actions include changing the device PIN code and putting the device to sleep. A device in sleep mode will no longer be findable or connectable via the app. To wake it up, you need to attach a magnet and look for a green LED flashing.
+In overview window you can see device details, check firmware version and update if available , go to device configuration settings. If you select to Configure device new window will open with Basic and Advanced settings.
 <br>
@@ Line 241: / Line 162: @@
 |[[File:Eddystone ID settings.png|frameless]]
 |}
-In Advanced settings tab you can can configure EYE beacon sensor parameters: Beacon information (iBeacon ID*, Eddystone ID). UUID/MINOR/MAJOR parameter can be changed for iBeacon ID*. Namespace ID/Instance ID can be changed for Eddystone ID. If you scroll down you will be able to adjust Sensor reading interval and event settings of the EYE Sensor '''Note:''' iOS doesn't show devices with iBeacon protocol<br><p style="font-size:32px"><span style="color:#0054A6">FM Tracker Configuration</span></p>
+In Advanced settings tab you can can configure EYE beacon sensor parameters: Beacon information (iBeacon ID*, Eddystone ID). UUID/MINOR/MAJOR parameter can be changed for iBeacon ID*. Namespace ID/Instance ID can be changed for Eddystone ID. If you scroll down you will be able to adjust Sensor reading interval and event settings of the EYE Sensor '''Note:''' iOS doesn't show devices with iBeacon protocol
-===<p style="font-size:24px"><span style="color:#0054A6">Teltonika configurator (Base firmware / advanced mode)</span>===
+=====<p style="font-size:16px><span style="color:#0054A6">Advanced configuration: Sensor reading and events<span>=====
-If you have firmware / configurator which does not support EYE sensor tab in Bluetooth® 4.0 section, then you can still use Avanced BLE configuration to connect with EYE Sensors.
+<br>
+{|
+|- style="vertical-align: top;"
+|[[File:Magnetic field event.png]]
+|[[File:Humidity event.png]]
+|[[File:Temperature event.png]]
+|[[File:Movement event2.png]]
+|-
+|'''Magnetic field event''' - adjust if the device generates events based on detection or exit (loss) of the magnet.
+|'''Humidity event''' - adjust if the device generates events based on entrance or exit to selected humidity range
+|'''Temperature event''' - adjust if the device generates events based on entrance or exit to selected temperature range
+|'''Movement event''' - adjust movement/stop detection and timeouts it takes to register movement / stopping
+|-
+|[[File:Maximum event duration.png|frameless]]
+|[[File:Event Advertising settings.png|frameless]]
+|[[File:Sensor reading interval.png|frameless]]
+|-
+|'''Maximum event duration''' - how long will one event be advertised
+|'''Event advertising settings''' - advertising period after event detection
+|'''Sensor reading interval''' - how often values are updated by the device
+|}
+<br>
+==<p style="font-size:32px"><span style="color:#0054A6">FM Tracker Configuration</span></p>==
+===<p style="font-size:24px"><span style="color:#0054A6">Teltonika configurator (standard functionality / advanced mode)</span>===
+If you have firmware / configurator which does not support EYE sensor tab in Bluetooth 4.0 section, then you can still use Avanced BLE configuration to connect with EYE Sensors.
 To configure FM with BTSMP1 EYE Sensor:
@@ Line 263: / Line 210: @@
 # In [[FMB120 System settings|System settings]] Enable [[Codec#Codec%208%20Extended|Codec8 Extended]];
 # In [[FMB120 GPRS settings|GPRS settings]] Configure [[FMB120 GPRS settings#GPRS%20Settings%20and%20Server%20Settings|GPRS Settings and Server Settings]]
-# In [[FMB120 Bluetooth® settings|Bluetooth®]] settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
+# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
-# In [[FMB120 Bluetooth® 4.0 settings|Bluetooth® 4.0]] settings:
+# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:
 ## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
-## In [[FMB120 Bluetooth® 4.0 settings#Advanced%20Mode|Bluetooth® 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
+## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
 ## Configure MAC address of the sensor
 # To receive data to server enable corresponding IO elements in [[FMB120 I/O settings#Priority|FMB120 I/O settings]]
@@ Line 304: / Line 251: @@
 '''Preset Configuration:'''
-If EYE Sensor Packet Settings is EYE Sensors or Eddystone and EYE Sensors:<br>[[File:Preset2EYE.png|frameless|1152x1152px]]
+If EYE Sensor Packet Settings is EYE Sensors or Eddystone and EYE Sensors:<br>[[File:Eddystone and eye.png|frameless|1152x1152px]]
 <br>If EYE Sensor Packet Settings is EYE Sensors or iBeacon and EYE Sensors:
-[[File:Preset1EYE.png|frameless|1152x1152px]]
+[[File:Ibeacon and eye.png|frameless|1152x1152px]]
 '''IO element value descriptions:'''
@@ Line 319: / Line 264: @@
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Custom1
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Flags (not supported with current FMX640 preset)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Flags(not supported with curent FMX640 preset)
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Temperature
@@ Line 687: / Line 632: @@
      </tr></table>
-===<p style="font-size:24px"><span style="color:#0054A6">Teltonika configurator new functionalities EYE Sensor filtering by name</span>===
+===<p style="font-size:24px"><span style="color:#0054A6">Teltonika configurator new functionalities (not released yet)</span>===
-Starting with firmware <b>03.28.04.Rev.207</b> there is additional tabs available in Bluetooth® 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.
+Starting with firmware 03.27.10.Rev.323 there is additional tabs available in Bluetooth 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.
-'''It's now possible to connect up to 100 sensors at once just by entering one name in the configurator name list.''' It's required to enter at least 3 characters(case sensitive) in the name for FM to scan the sensors. Super easy to set up!
+'''Bluetooth 4.0'''
-For example, you may order Sensors with special configuration from factory where the EYE Sensor names would be TRAILER_1,TRAILER_2,...,TRAILER_99  and so on.
-If you would enter TRAILER in the EYE Fimrware FM configurator then sensors who meet this name condition, for example TRAILER_1, TRAILER_21 , TRAILER_17, would be scanned,  while other sensors named Tools, MP1_123546, etc. will not be scanned.
-With this option, you can upload one configuration to FOTA web and it doesn’t matter which sensor from the list end user will mount, it will be scanned and sent to the server as long as it meets the name criteria.
-'''Bluetooth® 4.0'''
 <br>
-Functionalities were reorganized and transferred to Bluetooth® 4.0 configuration tab with additional horizontal tabs selection for specific settings:
+Functionalities were reorganized and transferred to Bluetooth 4.0 configuration tab with additional horizontal tabs selection for specific settings:
 <br>
 *'''Global''' - Parameters responsible for device scanning ability like power and duratations.
@@ Line 710: / Line 648: @@
 *'''BLE Scan Duration''' - Sensors data reading time. Recommended value 30.
 *'''Scan retries until error''' - Scan retries count, till start to show the value as Error '3000' - sensor disconnected. Recommended value 30.
-*'''BT Power Level''' - Telematics device Bluetooth® power level setting.
+*'''BT Power Level''' - Telematics device Bluetooth power level setting.
 *'''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.
 *''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.
 <br>
-[[File:BLE 4,0 Common settings.png]]
+[[File:Configurator GUI changes.png]]
 <br>
 <br>
-'''Sensors'''
+'''EYE Sensor'''
 <br>
-Sensor Configuration can be set to Custom Sensors, Eye Sensors or both.
-With the Custom Sensors setting enabled, [https://wiki.teltonika-gps.com/view/FMB130_Bluetooth®_4.0_settings#Advanced_Mode| any BLE sensor can be configured.]<br>
-When '''EYE Sensors''' is selected, Eye Sensor connectionless functionalities or EYE list search window will appear, depending on the selected EYE Sensor filter.
 <br>
-[[File:EYE Sensors NAME.png]]
+'''EYE Sensor''' functionality allows to configure MAC addresses for 4 sensors that user wants to read
-<br>'''Name''' <br>
-When EYE Sensors Filter is set to '''Name''', the Eye List search window will appear on the configurator. With this setting, separate EYE Sensor records (AVL ID: 11317) will be generated according to the configured parameters, which are described below:
 <br>
-*'''Data Clear period'''- defines how long the FM tracker waits when the Eye sensor is not detected before removing it from the Eye Sensor list and not sending the sensor values. If Data Clear Period is set to 0, then the EYE Sensor will not be removed from the EYE Sensor list and it will always be included in the periodic records.<br>
+'''Data clear period''' - if value equal or higher than 1, it will clear sensors BLE IO elements values if they were not updated for configurated amount of time.
+<br>
+[[File:Sensor 1 EYE.png]]
+<br>
+<br>'''I/O elements'''
+<br>Starting with firmware 03.27.10.Rev.323 there is additional tabs available in Bluetooth 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon. <br>'''Note:''' If you are using presets(firmware/configurator without EYE product support), then refer to [[FMB130 Teltonika Data Sending Parameters ID#BLE%20Sensors%20I.2FO%20elements|BLE Sensors I/O elements]] table instead.
-*'''RSSI'''- Parameter defines the dBm threshold value of when the EYE sensor will be added to the sensor list. If the FM tracker detects the RSSI lower than the configured value, it will not be added to the EYE Sensor list. <br>
+Table below describes I/O elements which were added for EYE sensor and proximity functionalities.
-*'''Record period''' - Defines how often the EYE Sensor record (AVL ID: 11317) will be generated when the FM tracker is operating On Stop or On Move modes, according to the configured [https://wiki.teltonika-gps.com/view/FMB140_System_settings#Movement_Source| movement source.].<br>
+<br><table class="nd-othertables_2" style="width: 100%;">
+ <tr>
-*'''EYE Sensor Settings''' - Define what sensor readings data is included in to the EYE Sensor Records. Sensor readings which are not needed can be disabled, to reduce data consumption.<br>
+        <th style="width: 10%; text-align:center; vertical-align:middle;">Property ID in AVL packet</th>
-*'''EYE Name list''' - Defines what EYE sensors will be added to EYE Sensor list. For EYE Sensors to be added to the list, only the beginning part of the EYE Sensor local name has to match. For example, if in the EYE name list “EYE_SENSOR” is added and the FM tracker detects EYE_SENSOR1, EYE_SENSOR2, EYE_SENSORXYZ, all these EYE Sensors will be added to EYE Sensor list. If the EYE name list is left empty, all the detected EYE Sensors will be included in the EYE Sensor list. '''NOTE:''' If EYE Sensor has a name that matches configured one in EYE Name List and if it has a MAC address, that matches configured one in EYE Sensors filtered by MAC address, then such sensor will not be added to EYE Sensor list, but it’s data will be added according EYE Sensor filtered by MAC IO elements.<br>
+        <th style="width: 20%; text-align:center; vertical-align:middle;">Property name</th>
-[[File:EYE List name search.png]]
+        <th style="width: 5%; text-align:center; vertical-align:middle;">Bytes</th>
-<br>
+        <th style="width: 10%; text-align:center; vertical-align:middle;">Type</th>
-<br>
+        <th style="width: 10%; text-align:center; vertical-align:middle;">Min</th>
-Once Eye Sensor filtering by name list is selected, EYE Sensor records containing the AVL ID:11317 will start being generated. Below is an example of how EYE Sensor data is packed into AVL ID 11317 <br>
+        <th style="width: 10%; text-align:center; vertical-align:middle;">Max</th>
-'''AVL ID 11317 structure'''
+        <th style="width: 5%; text-align:center; vertical-align:middle;">Multiplier</th>
-{| class="wikitable"
+        <th style="width: 5%; text-align:center; vertical-align:middle;">Units</th>
-|+
+        <th style="width: 25%; text-align:center; vertical-align:middle;">Description</th>
-! colspan="2" |Eye Sensor #1
+    </tr>
-|-
+        <tr>
-|EYE Sensor #1 Data length
+        <td style="width: 10%; text-align:center; vertical-align:middle;">10800</td>
-|1 byte
+        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 1</td>
-|-
+        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-|1st Parameter ID
+        <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
-|1 byte
+        <td style="width: 10%; text-align:center; vertical-align:middle;">-32768</td>
-|-
+        <td style="width: 10%; text-align:center; vertical-align:middle;">32768</td>
-|1st Parameter Data Length
+        <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
-|1 byte
+        <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
-|-
+        <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 1</td>
-|1st Parameter Data
+    </tr>
-|variable
+        <tr>
-|-
+        <td style="width: 10%; text-align:center; vertical-align:middle;">10801</td>
-|2nd Parameter ID
+        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 2</td>
-|1 byte
+        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-|-
+        <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
-|2nd Parameter Data Length
+        <td style="width: 10%; text-align:center; vertical-align:middle;">-32768</td>
-|1 byte
+        <td style="width: 10%; text-align:center; vertical-align:middle;">32768</td>
-|-
+        <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
-|2nd Parameter Data
+        <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
-|variable
+        <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 2</td>
-|-
+    </tr>
-| colspan="2" |<...>
+        <tr>
-|-
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10802</td>
-|Nth Parameter ID
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 3</td>
-|1 byte
+         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-|-
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
-|Nth Parameter Data Length
+         <td style="width: 10%; text-align:center; vertical-align:middle;">-32768</td>
-|1 byte
+         <td style="width: 10%; text-align:center; vertical-align:middle;">32768</td>
-|-
+         <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
-|Nth Parameter  Data
+         <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
-|variable
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 3</td>
-|-
-! colspan="2" |Eye Sensor #2
-|-
-|Eye Sensor #2 Data length
-|1 byte
-|-
-|1st Parameter ID
-|1 byte
-|-
-|1st Parameter Data Length
-|1 byte
-|-
-|1st Parameter Data
-|variable
-|-
-|2nd Parameter ID
-|1 byte
-|-
-|2nd Parameter Data Length
-|1 byte
-|-
-|2nd Parameter Data
-|variable
-|-
-| colspan="2" |<...>
-|-
-|Nth Parameter ID
-|1 byte
-|-
-|Nth Parameter Data Length
-|1 byte
-|-
-|Nth Parameter  Data
-|variable
-|-
-! colspan="2" |Eye Sensor #N
-|-
-!...
-!...
-|}
-Parameter IDs are used to identify what type of EYE Sensor information is included in the packet. Below is the table describing the possible EYE Sensor parameter IDs, along with their data type and data length. <br>
-{| class="wikitable nd-othertables_2" style="width:125%;" ;
-|+'''Table 1. EYE Sensor Parameter IDs'''
-|-
-!Parameter ID!!Name
-!Data type!!Description
-|-
-|5||Eye Sensor Device Name
-|Array||Device’s name from Device Name List tab
-|-
-|6
-|EYE Sensor Temperature
-|2 byte signed integer
-|Temperature value measured by EYE Sensor from List Values from -32768 to +32768 with 0.01 C delta
-|-
-|7
-|EYE Sensor Humidity
-|1 byte unsigned integer
-|Humidity measured by EYE Sensor from List Values from 0 to 100%
-|-
-|8
-|EYE Sensor Magnet presence
-|1 byte unsigned integer
-|Magnet measured by EYE Sensor from List Values from 0 to1
-|-
-|9
-|EYE Sensor Movement presence
-|1 byte unsigned integer
-|Movement measured by Eye Sensor from List Values
-|-
-|10
-|EYE Sensor Movement count
-|2 byte unsigned integer
-|Movement counts measured by EYE Sensor from List Values
-|-
-|11
-|EYE Sensor Pitch
-|1 byte signed integer
-|Pitch angle measured by Eye Sensor from list Values
-|-
-|12
-|EYE Sensor Angle Roll
-|2 byte signed integer
-|Roll Angle measured by EYE Sensor from List Values
-|-
-|13
-|EYE Sensor Low battery indicator
-|1 byte unsigned integer
-|Low battery state measured by EYE Sensor from List Values from 0 to1
-|-
-|14
-|EYE Sensor Battery voltage
-|2 byte unsigned integer
-|Low battery state measured by EYE Sensor from List Values from 0 to1
-|-
-|15
-|EYE Sensor MAC adress
-|6 byte unsigned integer
-|Device's MAC adress
-|-
-|16
-|EYE Sensor Magnet trigger count*
-|2 byte unsigned integer
-|Magnet trigger counts measured by EYE Sensor from List Values
-<nowiki>*</nowiki>Only available with evaluation firmware BTSX.1.2.8.magcounter.R.0 of EYE Devices
-|-
-|}
-<br>
-<br>
-[[File:EYE Sensors MAC.png]]
-<br>
-'''MAC''' <br>
-IF EYE Sensors are selected to be filtered by '''MAC address''', separate EYE sensor records will not be generated; EYE sensor values will be included into regular records with their corresponding IO elements. Up to 4 EYE Sensors can be configured with different MAC Addresses.
-In the case of filtering by MAC Address, more advanced configuration is possible, as EYE Sensors’ IOs’ Low, High level, Event Only and Operand parameters can also be configured separately for each IO.  <br>
-*'''Working Mode''' - parameter has 2 options – Disabled and EYE Sensor. When it is disabled, EYE Sensor IO values will not be included into the records. When EYE Sensor is selected, EYE Sensor IO values will be included into records. <br>
-*'''MAC Settings''' - parameter specifies the MAC address of the EYE Sensor for the FM tracker to read, parse its data and put to corresponding IO elements. If the sensor is not found for set amount of scan retries, error values will be stored into IO elements. <br>
-*'''I/O elements''' - allows for advanced EYE sensor [https://wiki.teltonika-gps.com/view/FMB130_I/O_settings I/O elements configuration].
-[[File:Eye Sensor Connectionless Functionalities.png]]
-<br>
-'''EYE Sensor AVL IDs''' <br>
-Table below describes I/O elements which were added for EYE sensor with the new functionalities release.<br><table class="nd-othertables_2" style="width: 100%;">
- <tr>
-         <th style="width: 10%; text-align:center; vertical-align:middle;">Property ID in AVL packet</th>
-         <th style="width: 20%; text-align:center; vertical-align:middle;">Property name</th>
-         <th style="width: 5%; text-align:center; vertical-align:middle;">Bytes</th>
-         <th style="width: 10%; text-align:center; vertical-align:middle;">Type</th>
-         <th style="width: 10%; text-align:center; vertical-align:middle;">Min</th>
-         <th style="width: 10%; text-align:center; vertical-align:middle;">Max</th>
-         <th style="width: 5%; text-align:center; vertical-align:middle;">Multiplier</th>
-         <th style="width: 5%; text-align:center; vertical-align:middle;">Units</th>
-         <th style="width: 25%; text-align:center; vertical-align:middle;">Description</th>
      </tr>
-<tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">11317</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Sensor List</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">variable length</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">HEX</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0 bytes</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">1024 bytes</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">EYE Sensor List</td>
          <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10800</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10803</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 1</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 4</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
@@ Line 929: / Line 724: @@
          <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 1</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 4</td>
      </tr>
          <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10801</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10804</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 2</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Humidity 1</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-32768</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">32768</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">100</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">%</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 2</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Humidity measured by EYE sensor 1</td>
      </tr>
          <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10802</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10805</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 3</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Humidity 2</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-32768</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">32768</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">100</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">%</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 3</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Humidity measured by EYE sensor 2</td>
      </tr>
          <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10803</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10806</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Temperature 4</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Humidity 3</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">Signed</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">-32768</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">32768</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">0,01</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">°C</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Temperature measured by EYE sensor 4</td>
-    </tr>
-        <tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10804</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Humidity 1</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
@@ Line 973: / Line 757: @@
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">%</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Humidity measured by EYE sensor 1</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Humidity measured by EYE sensor 3</td>
-    </tr>
-        <tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10805</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Humidity 2</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">100</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">%</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Humidity measured by EYE sensor 2</td>
-    </tr>
-        <tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10806</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Humidity 3</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">100</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">%</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Humidity measured by EYE sensor 3</td>
      </tr>
          <tr>
@@ Line 1,055: / Line 817: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10812</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement 1</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,065: / Line 827: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10813</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement 2</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,075: / Line 837: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10814</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement 3</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,085: / Line 847: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10815</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement 4</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,094: / Line 856: @@
          <tr>
          <td style="width: 10%; text-align:center; vertical-align:middle;">10816</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 1</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Angle 1</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">4</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFFFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,104: / Line 866: @@
          <tr>
          <td style="width: 10%; text-align:center; vertical-align:middle;">10817</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 2</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Angle 2</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">4</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFFFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,114: / Line 876: @@
          <tr>
          <td style="width: 10%; text-align:center; vertical-align:middle;">10818</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 3</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Angle 3</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">4</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFFFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,124: / Line 886: @@
          <tr>
          <td style="width: 10%; text-align:center; vertical-align:middle;">10819</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 4</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Angle 4</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">4</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFFFFFFFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,179: / Line 941: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10824</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Battery Voltage 1</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,190: / Line 952: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10825</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Battery Voltage 2</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,201: / Line 963: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10826</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Battery Voltage 3</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
@@ Line 1,212: / Line 974: @@
          <td style="width: 10%; text-align:center; vertical-align:middle;">10827</td>
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Battery Voltage 4</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0xFF</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 25%; text-align:center; vertical-align:middle;">Battery Voltage of EYE sensor 4</td>
      </tr>
-     <tr>
+        <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10832</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10828</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Roll 1</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Proximity Near</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1024</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">HEX</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">-180</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">180</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">1024</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Roll value of EYE Sensor 1</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Beacon list in Near Proximity zone</td>
      </tr>
-	<tr>
+         <tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10833</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10829</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Roll 2</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Proximity Away</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1024</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">HEX</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">-180</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">180</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Roll value of EYE Sensor 2</td>
-    </tr>
-	<tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10834</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Roll 3</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">-180</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">180</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Roll value of EYE Sensor 3</td>
-    </tr>
-	<tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10835</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Roll 4</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">-180</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">180</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Roll value of EYE Sensor 4</td>
-    </tr>
-<tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10836</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement Count 1</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">1024</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Movement count value of EYE Sensor 1</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Beacon list in Away Proximity zone</td>
      </tr>
-	<tr>
+        <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10837</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10830</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement Count 2</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Proximity Far Away</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1024</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">HEX</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">1024</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Movement count value of EYE Sensor 2</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">Beacon list in Away Far zone</td>
      </tr>
-	<tr>
+        <tr>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">10838</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">10831</td>
-         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement Count 3</td>
+         <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Proximity Lost</td>
-         <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+         <td style="width: 5%; text-align:center; vertical-align:middle;">1024</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">HEX</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">1024</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-         <td style="width: 25%; text-align:center; vertical-align:middle;">Movement count value of EYE Sensor 3</td>
+         <td style="width: 25%; text-align:center; vertical-align:middle;">List of Beacon which were lost from proximity zones</td>
      </tr>
-	<tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10839</td>
+</table>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Movement Count 4</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+==<p style="font-size:32px"><span style="color:#0054A6">EYE Sensor Protocol overview</span></p>==
-        <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+===<p style="font-size:24px><span style="color:#0054A6">Sensor advertising</span>===
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
+<br>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
+[[File:Sensors data.png|center]]
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Movement count value of EYE Sensor 4</td>
+<br>
-    </tr>
+===<p style="font-size:24px><span style="color:#0054A6">Beacon and sensors data</span>===
-        <tr>
+[[File:Beacon and sensors data.png|center|819x819px|alt=|frameless]]
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10840</td>
+<br>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Magnet count 1</td>
+<br>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+===<p style="font-size:24px><span style="color:#0054A6">Protocol description</span>===
-        <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
+At the highest-level Bluetooth LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
+<br><br>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
+BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
+<br><br>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
+Scan Response is used to send device name and manufacturer specific data. Manufacturer specific data includes Teltonika Company ID (0x089A) and protocol version (0x01). It is followed by Flag Encoded Data (Table 1) and Extended Data (Table 2). Later on, protocol will be highly configurable in and will allow to disable/enable sending of device name or any sensor value allowing to reduce size of the packet being sent.
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Magnet trigger count measure by EYE Sensor 1</td>
+<br><br>
-    </tr>
+Device Name has the following default value for Beacon – ID1_XXXXXXX
-        <tr>
+<br>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10841</td>
+<div style="display:inline-table">
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Magnet count 2</td>
+{| class="nd-othertables_2" style="width:125%;" ;
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
+|+'''Table 1. Flag Encoded Date'''
-        <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Magnet trigger count measure by EYE Sensor 2</td>
-    </tr>
-        <tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10842</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Magnet count 3</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Magnet trigger count measure by EYE Sensor 3</td>
-    </tr>
-        <tr>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">10843</td>
-        <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Magnet count 4</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">2</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">unsigned</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">0</td>
-        <td style="width: 10%; text-align:center; vertical-align:middle;">65535</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 5%; text-align:center; vertical-align:middle;">-</td>
-        <td style="width: 25%; text-align:center; vertical-align:middle;">Magnet trigger count measure by EYE Sensor 4</td>
-    </tr>
-</table>
-Eye sensor parameters have error code values, which will written to the I/O value if parameter data is not received. From the error code value, it is possible to distinguish whether the issue is on the FM tracker side or the EYE Sensor. Below is a table describing these values.
-{| class="wikitable"
-|+Eye Sensor Error Values
-! rowspan="2" |Parameter
-! rowspan="2" |Data length
-(bytes)
-! rowspan="2" |Data type
-! colspan="2" |Error codes
-!Additional Notes
 |-
-!Data Not Received by FM tracker
+!Data!! Size (Bytes)!!Description
-!EYE Sensor indicates error
-!
 |-
-|Temperature
+|Flags||1||Each set bit (0-7) means the presence of value (0-7). Bits:
-|2
+<br>0 – Temperature value presence
-|signed
+<br>1 – Humidity value presence
-|25000
+<br>2 – Magnetic sensor presence
-|25001
+<br>3 – Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
-|
+<br>4 – Movement sensor counter
+<br>5 – Movement sensor angle
+<br>6 – Low Battery indication (if set to 1 low battery voltage detected)
+<br>7 – Battery voltage value presence
 |-
-|Humidity
+|Value 0||2||Temperature
-|1
+<br>Value in Celsius * 100
-|unsigned
+<br>NOTE: present only if bit 0 is set, otherwise is not being sent
-|250
-|251
-|
 |-
-|Magnet
+|Value 1 ||1||Humidity
-|1
+<br>Value in percent
-|unsigned
+<br>NOTE: present only if bit 1 is set, otherwise is not being sent
-|250
-|251
-|
 |-
-|Magnet trigger count
+|Value 2||2||Movement Sensor counter
-|2
+<br>Most significant bit indicates movement state and 15 least significant bits represent count of movement events.
-|unsigned
+<br>NOTE: present only if bit 4 is set, otherwise is not being sent
-|65000
-|65001
-|Only available with evaluation firmware BTSX.1.2.8.magcounter.R.0 of EYE Devices
 |-
-|Movement
+|Value 3 ||3||Movement sensor angle
-|1
+<br>Most significant byte – pitch (-90/+90)
-|unsigned
+<br>Two least significant bytes – roll (-180/+180)
-|250
+<br>NOTE: present only if bit 5 is set, otherwise is not being sent
-|251
-|
 |-
-|Movement counter
+|Value 4||1|| Battery Voltage
-|2
+<br>Battery voltage in mV = 2000 + VALUE * 10
-|unsigned
+<br>NOTE: present only if bit 7 is set, otherwise is not being sent
-|65000
-|65001
-|
-|-
-|Pitch
-|1
-|signed
-|120
-|121
-|
-|-
-|Roll
-|2
-|signed
-|250
-|251
-|
-|-
-|Low battery status
-|1
-|unsigned
-|250
-|251
-|
-|-
-|Battery voltage
-|1
-|unsigned
-|250
-|251
-|
 |}
+</div>
+===<p style="font-size:24px><span style="color:#0054A6">GATT Characteristics</span>===
-'''Note:''' If you are using presets(firmware/configurator without EYE product support), then refer to [[FMB130 Teltonika Data Sending Parameters ID#BLE%20Sensors%20I.2FO%20elements|BLE Sensors I/O elements]] table instead.<p style="font-size:32px"><span style="color:#0054A6">EYE Sensor Protocol overview</span></p>
+{| class="wikitable" style="width: 100%; background-color: white; border-bottom: 2px solid #0054A6;"
-==<p style="font-size:24px><span style="color:#0054A6">Sensor advertising</span>==
+|-
-<br>
-[[File:Sensors data.png|center]]
-<br>
-===<p style="font-size:24px><span style="color:#0054A6">Beacon and sensors data</span>===
-[[File:Beacon and sensors data.png|center|1000x1000px|alt=|frameless]]
-<br>
-<br>
-===<p style="font-size:24px><span style="color:#0054A6">Protocol description</span>===
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 20px;" | Name
-At the highest-level Bluetooth® LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.
-<br><br>
-BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.
-<br><br>
-Scan Response is used to send device name and manufacturer specific data. Manufacturer specific data includes Teltonika Company ID (0x089A) and protocol version (0x01). It is followed by Flag Encoded Data (Table 1) and Extended Data (Table 2). Later on, protocol will be highly configurable in and will allow to disable/enable sending of device name or any sensor value allowing to reduce size of the packet being sent.
-<br><br>
-Teltonika BTSX devices are transmitting one or two packets depending on the selected protocol. Broadcast packet + Scan response packet.
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" | Service UUID
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" | Characteristic UUID
-A scan response packet is sent when an active scan is used, within the BLE layer of communication.
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Data Type
-The default for our FM devices and many other applications for example our EYE Appication or nRF connect Application is an active scan.
-There are three protocols, with the following packets:
-'''1.iBeacon + EYE Sensors'''
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Min
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Max
-'''2.Eddystone + EYE Sensors'''
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 120px" | Default Value
-For '''iBeacon + EYE Sensors''' and '''Eddystone + EYE Sensors''' protocols only iBeacon/Eddystone packet is broadcasted and will be seen by both active and passive scans, to see the EYE Sensors packet you need to use an active scan.
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Notes
-In other words in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all, only the iBeacon/Eddystone packet will be sent by the BTS device to conserve energy.
-'''3. EYE Sensors'''
+|-
-With '''EYE Sensors''' protocol, the EYE Sensor packet becomes broadcast.
+| Device Name || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0016-7df2-4d4e-8e6d-c611745b92e9  || ASCII || 0 || 11 || Unique for each device || -
-In other words, in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all EYE Sensors packet will be sent by the BTS device.
-More Information on
-[https://support.digitalmatter.com/support/solutions/articles/16000100684-active-vs-passive-bluetooth-scanning| Active vs passive scans]
-<br>
-<br>
-Device Name has the following default value for Beacon – ID1_XXXXXXX
-<br>
-<div style="display:inline-table">
-{| class="nd-othertables_2" style="width:125%;" ;
-|+'''Table 1. Flag Encoded Date'''
 |-
-!Data!! Size (Bytes)!!Description
+| Tx Power Lever || 1804 || 00002a07-0000-1000-8000-00805f9b34fb || SINT8 || -14 || 8 || 2 || Possible values: -14, -11, -8, -5, -2, 2, 4, 8
 |-
-|Flags||1||Each set bit (0-7) means the presence of value (0-7). Bits:
-<br>0 – Temperature value presence
+| Protocol Type|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0001-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 4 || 1 for EYE_Beacon, <br> 4 for EYE_Sensor || 0 - iBeacon <br> 1 - EddyStone <br> 2 - EYE Sensor <br> 3 - iBeacon + EYE Sensor <br> 4 - Eddsytone + EYE Sensor
-<br>1 – Humidity value presence
-<br>2 – Magnetic sensor presence
-<br>3 – Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
-<br>4 – Movement sensor counter
-<br>5 – Movement sensor angle
-<br>6 – Low Battery indication (if set to 1 low battery voltage detected)
-<br>7 – Battery voltage value presence
 |-
-|Value 0||2||Temperature
-<br>Value in Celsius / 100
+| Advertising Interval|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0002-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 10000 || 1000 || miliseconds
-<br>NOTE: present only if bit 0 is set, otherwise is not being sent
 |-
-|Value 1 ||1||Humidity
-<br>Value in percent
+| Sub Advertising Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0003-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 1000 || 100 || Used by repeats, miliseconds
-<br>NOTE: present only if bit 1 is set, otherwise is not being sent
 |-
-|Value 2||2||Movement Sensor counter
-<br>Most significant bit indicates movement state and 15 least significant bits represent count of movement events.
+| Advertising Repeats || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0004-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1 || 10 || 1 || Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1
-<br>NOTE: present only if bit 4 is set, otherwise is not being sent
 |-
-|Value 3 ||3||Movement sensor angle
-<br>Most significant byte – pitch (-90/+90)
+| iBeacon ID ||  e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0005-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 20 bytes || 20 bytes || Unique for each device || 16 B - UUID<br>2 B - major<br>2 B - minor
-<br>Two least significant bytes – roll (-180/+180)
-<br>NOTE: present only if bit 5 is set, otherwise is not being sent
 |-
-|Value 4||1|| Battery Voltage
-<br>Battery voltage in mV = 2000 + VALUE * 10
-<br>NOTE: present only if bit 7 is set, otherwise is not being sent
-|}
-</div>
-===<p style="font-size:24px><span style="color:#0054A6">GATT Characteristics</span>===
+| Eddystone ID || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0006-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 16 bytes || 16 bytes || Unique for each device || 10 B - Namespace<br>6 B - Instance
-{| class="wikitable" style="width: 100%; background-color: white; border-bottom: 2px solid #0054A6;"
 |-
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 20px;" | Name
+| Password || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0008-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 4 bytes ||4 bytes || 123456 || Always 6 Digits
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" | Service UUID
+|-
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" | Characteristic UUID
+| Sensor Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0009-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 10000 || 1000 || miliseconds
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Data Type
+|-
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Min
+| Event Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000a-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 10000 || 1000 || miliseconds
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Max
+|-
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 120px" | Default Value
+| Event Duration || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000b-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 30 || 30 || seconds
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Notes
 |-
-| Device Name || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0016-7df2-4d4e-8e6d-c611745b92e9  || ASCII || 0 || 12 || Unique for each device || -
+| Temperature Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000c-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance<br>1 - on exit<br>2 - no event
 |-
-| Tx Power Lever || 1804 || 2a07 || SINT8 || -14 || 8 || 2 || Possible values: -14, -11, -8, -5, -2, 2, 4, 8
+| Temperature Low || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000d-7df2-4d4e-8e6d-c611745b92e9 || INT8 || -40 || 85 || -20 || celsius
 |-
-| Protocol Type|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0001-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 4*
+| Temperature High || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000e-7df2-4d4e-8e6d-c611745b92e9 || INT8 || -40 || 85 || 50 || celsius
+|-
-<small>*Max 2 with 01.02.10+ firmware</small>
+| Humidity Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000f-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance<br>1 - on exit<br>2 - no event
-| 1 for EYE_Beacon, <br>4 for EYE_Sensor*
+|-
-<small>*with 01.02.10+ firmware 1 for both EYE_Beacon & EYE_Sensor</small>
+| Humidity Low || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0010-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 100 || 15 || %
-| 0 - iBeacon <br>1 - Eddystone <br>2 - EYE Sensor <br>3 - iBeacon + EYE Sensor* <br>4 - Eddystone + EYE Sensor*
-<small>*01.02.10+ sensors are enabled over ''Activate / Deactivate Sensors''</small>
 |-
-|Activate / Deactivate Sensors*
+| Humidity High || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0011-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 100 || 50 || %
-<small>*from 01.02.10+ firmware</small>
+|-
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-|e61c0021-7df2-4d4e-8e6d-c611745b92e9
-|UINT8
-|0
-|15
-(0b1111)
+| Movement Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0012-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance<br>1 - on exit<br>2 - no event
-|4 (0b0100) for EYE_Beacon, <br>15 (0b1111) for EYE_Sensor
-|(LSb) bit 0 – Temperature
-Bit 1 – Humidity
+|-
-Bit 2 – Magnetic
+| Movement Start || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0013-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 300 || 5 || seconds
-Bit 3 - Movement
+|-
+| Movement Stop || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0014-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 300 || 5 || seconds
-E.g. EYE_Sensor disabled movement & enabled temperature, humidity, magnetic sensors 7 (0b0111)
 |-
-| Advertising Interval|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0002-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1000 || 10000 || 5000 || miliseconds
+| Magnetic Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0015-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance <br> 1 - on exit <br> 2 - no event
 |-
-| Sub Advertising Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0003-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 1000 || 100 || Used by repeats, miliseconds
+| Manufacturer || 180A  || 2A29  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "Teltonika"
 |-
-| Advertising Repeats || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0004-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1 || 10 || 1 || Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1
+| Model || 180A  || 2A24  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "BTSID1"
 |-
-| iBeacon ID ||  e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0005-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 20 bytes || 20 bytes || Unique for each device || 16 B - UUID<br>2 B - major<br>2 B - minor
+| Serial || 180A  || 2A25  || BYTE ARRAY || - || - || Not Configurable || Not used
 |-
-| Eddystone ID || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0006-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 16 bytes || 16 bytes || Unique for each device || 10 B - Namespace<br>6 B - Instance
+| Hardware || 180A  || 2A27  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "Table:1 Volt:325
-|-
-|Command
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-|e61c0007-7df2-4d4e-8e6d-c611745b92e9
-| colspan="5" |[[EYE SENSOR / BTSMP1#Command characteristic|Command characteristic]]
-|-
-|Password||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c0008-7df2-4d4e-8e6d-c611745b92e9 ||BYTE ARRAY|| 6 bytes||6 bytes||123456||Always 6 Digits
 |-
-|Movement Start ||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0013-7df2-4d4e-8e6d-c611745b92e9|| UINT16||0||300||5||seconds
+| Firmware || 180A  || 2A26  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "1.1.0-beta"
 |-
-|Movement Stop||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0014-7df2-4d4e-8e6d-c611745b92e9|| UINT16||0||300||5 ||seconds
+| System ID || 180A  || 2A23  || BYTE ARRAY || - || - || Not Configurable || Not used
-|-
-| Password Counter
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-| e61c0019-7df2-4d4e-8e6d-c611745b92e9
-|UINT8
-|0 (counter)
-|10 (counter)
-| 0
-|Byte 0 – counter,
-Byte 1 and 2 - timeout
-|-
-|Master Password (PUK)
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-|e61c0020-7df2-4d4e-8e6d-c611745b92e9
-| UINT8
-|8 bytes
-|8 bytes
-|MAC address dependency
-|Byte array
 |-
-|Manufacturer sleep (Hibernate mode)
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-|e61c0018-7df2-4d4e-8e6d-c611745b92e9
-|UINT8
-|0
-|1
-|1
-|0 – sleep disabled,
-– sleep enabled
+| MAC || 180A || 652143dc-dec6-4fb1-bd46-3e919d2410a6 || BYTE ARRAY || 6 || 6 || Not Configurable || Read Only. ex. 112233445566 -> 11:22:33:44:55:66
-|-
-|User ADV Spam Duration
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-|e61c0022-7df2-4d4e-8e6d-c611745b92e9
-|UINT16
-|1
-|300
-|30
-|WakeUp Advertising
-Spam Duration in seconds
 |-
-|RSSI Calibration Value
-|e61c0000-7df2-4d4e-8e6d-c611745b92e9
-|e61c0023-7df2-4d4e-8e6d-c611745b92e9
-|INT8
-|<nowiki>-100</nowiki>
-|127
-| 127
-|RSSI value in dBm
-  – Use default calib. table
+| Scan Response Data || e61c0000-7df3-4d4e-8e6d-c611745b92e9 || e61c0001-7df3-4d4e-8e6d-c611745b92e9  || BYTE ARRAY || 17 || 17 || Not Configurable || Scan Response Data, see picture for detail view of data structure
-|-
-|Manufacturer||180A||2A29||BYTE ARRAY||-||-||Not Configurable ||Read Only. Ex. "Teltonika"
+|}
-|-
+[[File:Lentele0603.png|800px|frameless|center]]
-| Model|| 180A||2A24|| BYTE ARRAY|| -||-|| Not Configurable||Read Only. Ex. "BTSID1"
+===<p style="font-size:24px><span style="color:#0054A6">EYE Sensor Bluetooth frame parsing example</span>===
+{| class="nd-othertables_2" style="width:100%;"
+|+
+! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
+| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span><span style="background:#B0BF1A">01</span><span style="background:#7CB9E8">06</span><span style="background:#C0E8D5">1A</span><span style="background:#B284BE">FF</span><span style="background:#72A0C1">4C00</span><span style="background:#EDEAE0">0215</span><span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span><span style="background:#EFDECD">BB70</span><span style="background:#E52B50">0055</span><span style="background:#FFF600">02</span><span style="background:#03C03C">0C</span><span style="background:#FF3800">09</span><span style="background:#FFBF00">4D50315F31323334353637</span><span style="background:#FF7E00">0E</span><span style="background:#3DDC84">FF</span><span style="background:#008000">9A08</span><span style="background:#00FFFF">01</span><span style="background:#D0FF14">B7</span><span style="background:#00FF00">08B4</span><span style="background:#007FFF">12</span><span style="background:#F4C2C2">0CCB</span><span style="background:#BFFF00">0BFFC7</span><span style="background:#00BFFF">67</span>
-|Serial||180A||2A25 ||BYTE ARRAY||-||-||Not Configurable ||Not used
+|}
+<br>
+{| class="nd-othertables_2" style="width:100%;"
+|+
+! colspan="4" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsed data
 |-
+! colspan="2" rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Parameter
-| Hardware||180A|| 2A27 ||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "Table:1 Volt:325
+! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |HEX Code Part
+! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Actual Value
 |-
+| rowspan="50" style="vertical-align: middle; text-align: center;" |
-|Firmware|| 180A ||2A26||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "1.1.0-beta"
+| style="vertical-align: middle; text-align: center;" |Length
+| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span>
+|
 |-
-| System ID ||180A||2A23||BYTE ARRAY||-||-|| Not Configurable||Not used
+| style="vertical-align: middle; text-align: center;" |Type
+| style="vertical-align: middle; text-align: center;" |<span style="background:#B0BF1A">01</span>
 |-
+| style="vertical-align: middle; text-align: center;" |Flags
-|MAC||180A||652143dc-dec6-4fb1-bd46-3e919d2410a6 || BYTE ARRAY||6||6||Not Configurable||Read Only. ex. 112233445566 -> 11:22:33:44:55:66
+| style="vertical-align: middle; text-align: center;" |<span style="background:#7CB9E8">06</span>
 |-
-|Calibration ID
+| style="vertical-align: middle; text-align: center;" |Length
-|180A
+| style="vertical-align: middle; text-align: center;" |<span style="background:#C0E8D5">1A</span>
-|a610249f-913e-46bd-b14f-c6dedc432165
-|BYTE ARRAY
-|9
-|12
-|Not Configurable
-|Read Only. e.g. 295268313
-<nowiki>*</nowiki>Only with EN12830 certified devices
 |-
+| style="vertical-align: middle; text-align: center;" |Type
-|Scan Response Data ||e61c0000-7df3-4d4e-8e6d-c611745b92e9|| e61c0001-7df3-4d4e-8e6d-c611745b92e9||BYTE ARRAY||17 || 17||Not Configurable ||Scan Response Data, see picture for detail view of data structure
+| style="vertical-align: middle; text-align: center;" |<span style="background:#B284BE">FF</span>
-|}
-[[File:Lentele0603.png|800px|frameless|center]]
-===Command characteristic===
-{| class="wikitable" style="width: 100%; background-color: white; border-bottom: 2px solid #0054A6;"
 |-
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 20px;" |Command's name
+| style="vertical-align: middle; text-align: center;" |Apple company identifier (big endian)
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Data to send
+| style="vertical-align: middle; text-align: center;" |<span style="background:#72A0C1">4C00</span>
-! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Description
 |-
-|Write to flash||0x0010|| Writes set parameters to flash
+| style="vertical-align: middle; text-align: center;" |Beacon type
+| style="vertical-align: middle; text-align: center;" |<span style="background:#EDEAE0">0215</span>
 |-
-|General boot||0x0011||Enter boot mode
+| style="vertical-align: middle; text-align: center;" |UUID
+| style="vertical-align: middle; text-align: center;" |<span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span>
 |-
-|Instant reset||0x0012||Software reset
+| style="vertical-align: middle; text-align: center;" |Major
+| style="vertical-align: middle; text-align: center;" |<span style="background:#EFDECD">BB70</span>
 |-
-|Reset after connection||0x0013||Reset after disconnect
+| style="vertical-align: middle; text-align: center;" |Minor
+| style="vertical-align: middle; text-align: center;" |<span style="background:#E52B50">0055</span>
 |-
-|Get hw voltage||0x0014||Sets detected hw voltage in response data
+| style="vertical-align: middle; text-align: center;" |Power
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FFF600">02</span>
 |-
-|Keep connection alive||0x0015|| Resets disconnect timer
+| style="vertical-align: middle; text-align: center;" |Length
+| style="vertical-align: middle; text-align: center;" |<span style="background:#03C03C">0C</span>
 |-
-|Restore defaults||0x0016||Sets all configurable parameters to default values
+| style="vertical-align: middle; text-align: center;" |Type
-|}
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FF3800">09</span>
-===<p style="font-size:24px"><span style="color:#0054A6">EYE Sensor Bluetooth® frame parsing example</span>===
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span><span style="background:#B0BF1A">01</span><span style="background:#7CB9E8">06</span><span style="background:#C0E8D5">1A</span><span style="background:#B284BE">FF</span><span style="background:#72A0C1">4C00</span><span style="background:#EDEAE0">0215</span><span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span><span style="background:#EFDECD">BB70</span><span style="background:#E52B50">0055</span><span style="background:#FFF600">02</span><span style="background:#03C03C">0C</span><span style="background:#FF3800">09</span><span style="background:#FFBF00">4D50315F31323334353637</span><span style="background:#FF7E00">0E</span><span style="background:#3DDC84">FF</span><span style="background:#008000">9A08</span><span style="background:#00FFFF">01</span><span style="background:#D0FF14">B7</span><span style="background:#00FF00">08B4</span><span style="background:#007FFF">12</span><span style="background:#F4C2C2">0CCB</span><span style="background:#BFFF00">0BFFC7</span><span style="background:#00BFFF">67</span>
+| style="vertical-align: middle; text-align: center;" |Device name
-|}
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FFBF00">4D50315F31323334353637</span>
-<br>
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="4" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsed data
 |-
-! colspan="2" rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Parameter
-! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |HEX Code Part
-! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Actual Value
-|-
-| rowspan="50" style="vertical-align: middle; text-align: center;" |
 | style="vertical-align: middle; text-align: center;" |Length
-| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FF7E00">0E</span>
-|
 |-
 | style="vertical-align: middle; text-align: center;" |Type
-| style="vertical-align: middle; text-align: center;" |<span style="background:#B0BF1A">01</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#3DDC84">FF</span>
 |-
-| style="vertical-align: middle; text-align: center;" | Flags
+| style="vertical-align: middle; text-align: center;" |Teltonika company ID (big endian)
-| style="vertical-align: middle; text-align: center;" |<span style="background:#7CB9E8">06</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#008000">9A08</span>
 |-
-| style="vertical-align: middle; text-align: center;" | Length
+| style="vertical-align: middle; text-align: center;" |Protocol version
-| style="vertical-align: middle; text-align: center;" |<span style="background:#C0E8D5">1A</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#00FFFF">01</span>
+|
 |-
-| style="vertical-align: middle; text-align: center;" |Type
+| style="vertical-align: middle; text-align: center;" |Flags
-| style="vertical-align: middle; text-align: center;" |<span style="background:#B284BE">FF</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#D0FF14">B7</span>
-|-
+|Raw value example 0xB7. Data has to be interpretated as binary value.
-| style="vertical-align: middle; text-align: center;" |Apple company identifier (big endian)
+In this example would be (MSB)<span style="background:#B284BE">1</span>011 011<span style="background:#00FFFF">1</span>(LSB) and is parsed from least significant byte(LSB).
-| style="vertical-align: middle; text-align: center;" |<span style="background:#72A0C1">4C00</span>
+– Temperature value presence. <span style="background:#00FFFF">1</span> Means device is reading and transmitting temperature value.
+– Humidity value presence. 1 Means device is reading and transmitting humidity value.
+– Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value.
+– Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
+– Movement sensor counter. 1 Means device is reading and transmitting movement state and count values.
+– Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values.
+– Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %.
+– Battery voltage value presence. <span style="background:#B284BE">1</span> Means device is reading and transmitting battery voltage value.
 |-
-| style="vertical-align: middle; text-align: center;" |Beacon type
+| style="vertical-align: middle; text-align: center;" |Temperature
-| style="vertical-align: middle; text-align: center;" |<span style="background:#EDEAE0">0215</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#00FF00">08B4</span>
+| Raw value example 0x08B4 hex, 2228 dec.
+Raw value needs to be divided by 100.
+'''Real temperature''' is 22,28 Celsius.
 |-
-| style="vertical-align: middle; text-align: center;" |UUID
+| style="vertical-align: middle; text-align: center;" | Humidity
-| style="vertical-align: middle; text-align: center;" |<span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#007FFF">12</span>
+|Raw value example 0x12 hex, 18 dec.
+Decimal value is humidity in percent. Humidity 18 %
 |-
-| style="vertical-align: middle; text-align: center;" | Major
+| style="vertical-align: middle; text-align: center;" |Movement
-| style="vertical-align: middle; text-align: center;" |<span style="background:#EFDECD">BB70</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#F4C2C2">0CCB</span>
+| (MSB)0000 1100 1100 1011(LSB) binary
+- Most significant byte(MSB) represents '''Movement status'''. In this case device is not moving 0. If it was 1 device is moving.
+1100 1100 1011 – represent detected movements count 3275 decimal value means device has detected total 3275 movement events,
 |-
-| style="vertical-align: middle; text-align: center;" |Minor
+| style="vertical-align: middle; text-align: center;" |Angle
-| style="vertical-align: middle; text-align: center;" |<span style="background:#E52B50">0055</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#BFFF00">0BFFC7</span>
+|0B – Most significant byte represents '''device pitch'''. Device pitch can be from -90 to 90 degrees.
+In this example device pitch is 0000 1011 (2's complement) = 11° degrees.
+FFC7– Two least significant bytes represent '''device roll'''. Device roll can be from -180 to 180 degrees.
+In this example device Roll is 1111 1111 1100 0111 (2's complement) = -57° degrees
 |-
-| style="vertical-align: middle; text-align: center;" |Power
+| style="vertical-align: middle; text-align: center;" |Battery voltage
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FFF600">02</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#00BFFF">67</span>
-|-
+|'''Battery voltage –''' raw value example 0x67 hex. Decimal value of parameter 103'''.''' To calculate battery voltage need to use calculation 2000 + (VALUE * 10). In this case battery voltage value 2000+(103x10)= 3030 mV
-| style="vertical-align: middle; text-align: center;" |Length
+|}
-| style="vertical-align: middle; text-align: center;" |<span style="background:#03C03C">0C</span>
+===<p style="font-size:24px><span style="color:#0054A6">FM Packet parsing example (standard functionality / advanced mode)</span>===
+{| class="nd-othertables_2" style="width:100%;"
+|+
+! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;" |Type
+| style="vertical-align: middle; text-align: center;"| Received data in hexadecimal stream: <code>00000000000000488E010000017CA6B6BFD8010F0E5188209AB482008600A80F0000000</code><br><code>00006000000020019090400560024000301CF0000001601D00000FF4D01D10000006D00000001014B0001B6010000CF7D</code>
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FF3800">09</span>
+|}
+{| class="nd-othertables_2" style="width:100%;"
+! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL Data Packet
 |-
-| style="vertical-align: middle; text-align: center;" |Device name
+! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data Packet Part
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FFBF00">4D50315F31323334353637</span>
+! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part
 |-
-| style="vertical-align: middle; text-align: center;" |Length
+| rowspan="4" style="vertical-align: middle; text-align: center;" |
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FF7E00">0E</span>
+| style="vertical-align: middle; text-align: center;" |Zero Bytes
+| style="vertical-align: middle; text-align: center;" |00 00 00 00
 |-
-| style="vertical-align: middle; text-align: center;" |Type
+| style="vertical-align: middle; text-align: center;" |Data Field Length
-| style="vertical-align: middle; text-align: center;" |<span style="background:#3DDC84">FF</span>
+| style="vertical-align: middle; text-align: center;" |00 00 00 48
+|-
+| style="vertical-align: middle; text-align: center;" |Codec ID
+| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)
+|-
+| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)
+| style="vertical-align: middle; text-align: center;" |01
 |-
-| style="vertical-align: middle; text-align: center;" |Teltonika company ID (big endian)
+| rowspan="34" style="vertical-align: middle; text-align: center;" |AVL Data
-| style="vertical-align: middle; text-align: center;" |<span style="background:#008000">9A08</span>
+| style="vertical-align: middle; text-align: center;" |Timestamp
+| style="vertical-align: middle; text-align: center;" |00 00 01 7C A6 B6 BF D8 (GMT: Friday, 22 October 2021 06:36:07)
 |-
-| style="vertical-align: middle; text-align: center;" |Protocol version
+| style="vertical-align: middle; text-align: center;" |Priority
-| style="vertical-align: middle; text-align: center;" |<span style="background:#00FFFF">01</span>
+| style="vertical-align: middle; text-align: center;" |01
-|
 |-
-| style="vertical-align: middle; text-align: center;" |Flags
+| style="vertical-align: middle; text-align: center;" |Longitude
-| style="vertical-align: middle; text-align: center;" |<span style="background:#D0FF14">B7</span>
+| style="vertical-align: middle; text-align: center;" |0F 0E 51 88
-|Raw value example 0xB7. Data has to be interpretated as binary value.
+|-
-In this example would be (MSB)<span style="background:#B284BE">1</span>011 011<span style="background:#00FFFF">1</span>(LSB) and is parsed from least significant byte(LSB).
+| style="vertical-align: middle; text-align: center;" |Latitude
+| style="vertical-align: middle; text-align: center;" |20 9A B4 82
-– Temperature value presence. <span style="background:#00FFFF">1</span> Means device is reading and transmitting temperature value.
-– Humidity value presence. 1 Means device is reading and transmitting humidity value.
-– Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value.
-– Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
-– Movement sensor counter. 1 Means device is reading and transmitting movement state and count values.
-– Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values.
-– Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %.
-– Battery voltage value presence. <span style="background:#B284BE">1</span> Means device is reading and transmitting battery voltage value.
 |-
-| style="vertical-align: middle; text-align: center;" |Temperature
+| style="vertical-align: middle; text-align: center;" |Altitude
-| style="vertical-align: middle; text-align: center;" |<span style="background:#00FF00">08B4</span>
+| style="vertical-align: middle; text-align: center;" |00 86
-|Raw value example 0x08B4 hex, 2228 dec.
-Raw value needs to be divided by 100.
-'''Real temperature''' is 22,28 Celsius.
 |-
-| style="vertical-align: middle; text-align: center;" | Humidity
+| style="vertical-align: middle; text-align: center;" |Angle
-| style="vertical-align: middle; text-align: center;" |<span style="background:#007FFF">12</span>
+| style="vertical-align: middle; text-align: center;" |00 0A
-|Raw value example 0x12 hex, 18 dec.
+|-
-Decimal value is humidity in percent. Humidity 18 %
+| style="vertical-align: middle; text-align: center;" |Satellites
+| style="vertical-align: middle; text-align: center;" |0E
 |-
-| style="vertical-align: middle; text-align: center;" | Movement
+| style="vertical-align: middle; text-align: center;" |Speed
-| style="vertical-align: middle; text-align: center;" |<span style="background:#F4C2C2">0CCB</span>
+| style="vertical-align: middle; text-align: center;" |00 00
-| (MSB)0000 1100 1100 1011(LSB) binary
-- Most significant byte(MSB) represents '''Movement status'''. In this case device is not moving 0. If it was 1 device is moving.
-1100 1100 1011 – represent detected movements count 3275 decimal value means device has detected total 3275 movement events,
 |-
-| style="vertical-align: middle; text-align: center;" |Angle
+| style="vertical-align: middle; text-align: center;" |Event IO ID
-| style="vertical-align: middle; text-align: center;" |<span style="background:#BFFF00">0BFFC7</span>
+| style="vertical-align: middle; text-align: center;" |00 00
-|0B – Most significant byte represents '''device pitch'''. Device pitch can be from -90 to 90 degrees.
-In this example device pitch is 0000 1011 (2's complement) = 11° degrees.
-FFC7– Two least significant bytes represent '''device roll'''. Device roll can be from -180 to 180 degrees.
-In this example device Roll is 1111 1111 1100 0111 (2's complement) = -57° degrees
 |-
-| style="vertical-align: middle; text-align: center;" |Battery voltage
+| style="vertical-align: middle; text-align: center;" |N of Total ID
-| style="vertical-align: middle; text-align: center;" |<span style="background:#00BFFF">67</span>
+| style="vertical-align: middle; text-align: center;" |00 06
-|'''Battery voltage –''' raw value example 0x67 hex. Decimal value of parameter 103'''.''' To calculate battery voltage need to use calculation 2000 + (VALUE * 10). In this case battery voltage value 2000+(103x10)= 3030 mV
-|}
-===<p style="font-size:24px"><span style="color:#0054A6">FM Packet parsing example (Base firmware / Advanced mode)</span>===
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" | Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;" | Received data in hexadecimal stream: <code>00000000000000488E010000017CA6B6BFD8010F0E5188209AB482008600A80F0000000</code><br><code>00006000000020019090400560024000301CF0000001601D00000FF4D01D10000006D00000001014B0001B6010000CF7D</code>
+| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
-|}
+| style="vertical-align: middle; text-align: center;" |00 00
-{| class="nd-othertables_2" style="width:100%;"
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL Data Packet
 |-
-! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" | AVL Data Packet Part
+| style="vertical-align: middle; text-align: center;" |N2 of Two Bytes IO
-! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part
+| style="vertical-align: middle; text-align: center;" |00 02
 |-
-| rowspan="4" style="vertical-align: middle; text-align: center;" |
+| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |Zero Bytes
+| style="vertical-align: middle; text-align: center;" |00 19 (25 = BLE Temperature #1)
-| style="vertical-align: middle; text-align: center;" | 00 00 00 00
 |-
-| style="vertical-align: middle; text-align: center;" |Data Field Length
+| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |00 00 00 48
+| style="vertical-align: middle; text-align: center;" |09 04 (2308=23.08°C)
 |-
-| style="vertical-align: middle; text-align: center;" |Codec ID
+| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)
+| style="vertical-align: middle; text-align: center;" |00 56 (86 = BLE Humidity #1)
 |-
-| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)
+| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |01
+| style="vertical-align: middle; text-align: center;" |00 36 (24 %RHT)
 |-
-| rowspan="34" style="vertical-align: middle; text-align: center;" |AVL Data
+| style="vertical-align: middle; text-align: center;" |N4 of Four Bytes IO
-| style="vertical-align: middle; text-align: center;" |Timestamp
+| style="vertical-align: middle; text-align: center;" |00 03
-| style="vertical-align: middle; text-align: center;" |00 00 01 7C A6 B6 BF D8 (GMT: Friday, 22 October 2021 06:36:07)
 |-
-| style="vertical-align: middle; text-align: center;" | Priority
+| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |01
+| style="vertical-align: middle; text-align: center;" |01 CF (463 - BLE 1 Custom #2 = Movement status and movement events count)
 |-
-| style="vertical-align: middle; text-align: center;" |Longitude
+| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |0F 0E 51 88
+| style="vertical-align: middle; text-align: center;" |00 00 00 16 (Currently not moving events count 22)
 |-
-| style="vertical-align: middle; text-align: center;" |Latitude
+| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |20 9A B4 82
+| style="vertical-align: middle; text-align: center;" |01 D0 (464 - BLE 1 Custom #3 = Angle )
 |-
-| style="vertical-align: middle; text-align: center;" |Altitude
+| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |00 86
+| style="vertical-align: middle; text-align: center;" |00 00 FF 4D (Pitch = 0°, Roll = -179°)
 |-
-| style="vertical-align: middle; text-align: center;" | Angle
+| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |00 0A
+| style="vertical-align: middle; text-align: center;" |01 D1 (465 - BLE 1 Custom #4 = Battery Voltage)
 |-
-| style="vertical-align: middle; text-align: center;" |Satellites
+| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |0E
+| style="vertical-align: middle; text-align: center;" |00 00 00 6D (109 = 2000 + 109 * 10 mV = 3090 mV)
 |-
-| style="vertical-align: middle; text-align: center;" |Speed
+| style="vertical-align: middle; text-align: center;" |N8 of Eight Bytes IO
 | style="vertical-align: middle; text-align: center;" |00 00
 |-
-| style="vertical-align: middle; text-align: center;" |Event IO ID
+| style="vertical-align: middle; text-align: center;" |NX of X Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 00
+| style="vertical-align: middle; text-align: center;" |00 01
 |-
-| style="vertical-align: middle; text-align: center;" |N of Total ID
+| style="vertical-align: middle; text-align: center;" |N’th IO ID - AVL ID.
-| style="vertical-align: middle; text-align: center;" |00 06
+| style="vertical-align: middle; text-align: center;" |01 4B (331 - BLE 1 Custom #1 = Flags)
 |-
-| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
+| style="vertical-align: middle; text-align: center;" |Length of Variable Length IO
-| style="vertical-align: middle; text-align: center;" |00 00
+| style="vertical-align: middle; text-align: center;" |00 01
-|-
-| style="vertical-align: middle; text-align: center;" |N2 of Two Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 02
-|-
-| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |00 19 (25 = BLE Temperature #1)
-|-
-| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |09 04 (2308=23.08°C)
-|-
-| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |00 56 (86 = BLE Humidity #1)
-|-
-| style="vertical-align: middle; text-align: center;" | Value
-| style="vertical-align: middle; text-align: center;" | 00 36 (24 %RHT)
-|-
-| style="vertical-align: middle; text-align: center;" | N4 of Four Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 03
-|-
-| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |01 CF (463 - BLE 1 Custom #2 = Movement status and movement events count)
-|-
-| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |00 00 00 16 (Currently not moving events count 22)
-|-
-| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |01 D0 (464 - BLE 1 Custom #3 = Angle )
-|-
-| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |00 00 FF 4D (Pitch = 0°, Roll = -179°)
-|-
-| style="vertical-align: middle; text-align: center;" |ID
-| style="vertical-align: middle; text-align: center;" |01 D1 (465 - BLE 1 Custom #4 = Battery Voltage)
-|-
-| style="vertical-align: middle; text-align: center;" |Value
-| style="vertical-align: middle; text-align: center;" |00 00 00 6D (109 = 2000 + 109 * 10 mV = 3090 mV)
 |-
+| style="vertical-align: middle; text-align: center;" |Value of Variable Length IO
+| style="vertical-align: middle; text-align: center;" |B7 = (MSB)<span style="background:#B284BE">1</span>1011 011<span style="background:#00FFFF">1</span>(LSB)
+It's parsed from least significant byte(LSB):
+Bit 0 – Temperature value presence.
+<span style="background:#00FFFF">1</span> Means device is reading and transmitting temperature value.
+Bit 1 – Humidity value presence.
+Means device is reading and transmitting humidity value.
+Bit 2 – Magnetic sensor presence.
+Means device is reading and transmitting Magnetic sensor value.
+Bit 3 – Magnetic sensor state
+magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
+Bit 4 – Movement sensor counter.
+Means device is reading and transmitting movement state and count values.
-| style="vertical-align: middle; text-align: center;" |N8 of Eight Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 00
-|-
-| style="vertical-align: middle; text-align: center;" |NX of X Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 01
-|-
-| style="vertical-align: middle; text-align: center;" |N’th IO ID - AVL ID.
-| style="vertical-align: middle; text-align: center;" |01 4B (331 - BLE 1 Custom #1 = Flags)
-|-
-| style="vertical-align: middle; text-align: center;" |Length of Variable Length IO
-| style="vertical-align: middle; text-align: center;" |00 01
-|-
-| style="vertical-align: middle; text-align: center;" | Value of Variable Length IO
-| style="vertical-align: middle; text-align: center;" |B7 = (MSB)<span style="background:#B284BE">1</span>011 011<span style="background:#00FFFF">1</span>(LSB)
-It's parsed from least significant byte(LSB):
+Bit 5 – Movement sensor angle.
-Bit 0 – Temperature value presence.
+Means device is reading and transmitting angle roll and pitch values.
-<span style="background:#00FFFF">1</span> Means device is reading and transmitting temperature value.
+Bit 6 – Low Battery indication.
-Bit 1 – Humidity value presence.
+– Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %.
-Means device is reading and transmitting humidity value.
+– Battery voltage value presence.
-Bit 2 – Magnetic sensor presence.
+<span style="background:#B284BE">1</span> Means device is reading and transmitting battery voltage value.
+|-
-Means device is reading and transmitting Magnetic sensor value.
+| style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records)
+| style="vertical-align: middle; text-align: center;" |01
-Bit 3 – Magnetic sensor state
-magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
-Bit 4 – Movement sensor counter.
-Means device is reading and transmitting movement state and count values.
-Bit 5 – Movement sensor angle.
-Means device is reading and transmitting angle roll and pitch values.
-Bit 6 – Low Battery indication.
-– Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %.
-– Battery voltage value presence.
-<span style="background:#B284BE">1</span> Means device is reading and transmitting battery voltage value.
-|-
-| style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records)
-| style="vertical-align: middle; text-align: center;" |01
 |-
 | style="vertical-align: middle; text-align: center;" |CRC-16
@@ Line 2,039: / Line 1,530: @@
 |-
 |}
-===<p style="font-size:24px"><span style="color:#0054A6">FM EYE Sensor record parsing example with the new firmware supporting EYE Sensor filtering by name)</span>===
-'''Parsing EYE Sensor records example''' <br>
-Below You will find an example on how to parse EYE Sensor record with two EYE Sensors present.
-{| class="nd-othertables_2" style="width:100%;"
+==<p style="font-size:32px"><span style="color:#0054A6">Safety information</span></p>==
-|+
+This message contains information on how to operate BTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
-|-
+. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.
-| style="vertical-align: middle; text-align: center;" |Received data in hexadecimal stream: <code>00000000000000908E0100000183407a2beb000f0e3fe3209ab40e008801290d00002c350001000000000</code><br><code>000000000012c350063<span style="background-color:#91d4b9;">0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc</code><br><code><span style="background-color:#91d4b9;">30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90</code><code>010000fef4</code>
-|}
+. In case of malfunction contact yours Teltonika account manager or write to technical support team over VIP helpdesk.<br>
+[[File:Safety.jpg]]
-{| class="nd-othertables_2" style="width:100%;"
+==<p style="font-size:32px><span style="color:#0054A6">Certification & Approvals</span></p>==
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL Data Packet
+{| class="wikitable"
-|-
+|+
-! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data Packet Part
+! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Certificates
-! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part
+! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |
-|-
-| rowspan="4" style="vertical-align: middle; text-align: center;" |
-| style="vertical-align: middle; text-align: center;" |Zero Bytes
-| style="vertical-align: middle; text-align: center;" |00 00 00 00
-|-
-| style="vertical-align: middle; text-align: center;" |Data Field Length
-| style="vertical-align: middle; text-align: center;" |00 00 00 90
-|-
-| style="vertical-align: middle; text-align: center;" |Codec ID
-| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)
-|-
-| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)
-| style="vertical-align: middle; text-align: center;" |01
-|-
-| rowspan="24" style="vertical-align: middle; text-align: center;" |AVL Data
-| style="vertical-align: middle; text-align: center;" |Timestamp
-| style="vertical-align: middle; text-align: center;" |00 00 01 83 40 7a 2b eb(GMT: Tuesday, 18 June 2019 08:25:22.001)
-|-
-| style="vertical-align: middle; text-align: center;" |Priority
-| style="vertical-align: middle; text-align: center;" |00
-|-
-| style="vertical-align: middle; text-align: center;" |Longitude
-| style="vertical-align: middle; text-align: center;" |0f 0e 3f e3
-|-
-| style="vertical-align: middle; text-align: center;" |Latitude
-| style="vertical-align: middle; text-align: center;" |20 9a b4 0e
-|-
-| style="vertical-align: middle; text-align: center;" |Altitude
-| style="vertical-align: middle; text-align: center;" |00 88
-|-
-| style="vertical-align: middle; text-align: center;" |Angle
-| style="vertical-align: middle; text-align: center;" | 01 29
-|-
-| style="vertical-align: middle; text-align: center;" |Satellites
-| style="vertical-align: middle; text-align: center;" | 0d
-|-
-| style="vertical-align: middle; text-align: center;" |Speed
-| style="vertical-align: middle; text-align: center;" |00 00
-|-
-| style="vertical-align: middle; text-align: center;" |Event IO ID
-| style="vertical-align: middle; text-align: center;" |2c 35 (11317)
-|-
-| style="vertical-align: middle; text-align: center;" |N of Total ID
-| style="vertical-align: middle; text-align: center;" |00 01
-|-
-| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
-| style="vertical-align: middle; text-align: center;" | 00 00
-|-
-| style="vertical-align: middle; text-align: center;" | N2 of Two Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 00
-|-
-| style="vertical-align: middle; text-align: center;" |N4 of Four Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 00
-|-
-| style="vertical-align: middle; text-align: center;" |N8 of Eight Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 00
-|-
-| style="vertical-align: middle; text-align: center;" |NX of X Bytes IO
-| style="vertical-align: middle; text-align: center;" |00 01
-|-
-| style="vertical-align: middle; text-align: center;" |N’th IO ID - AVL ID.
-| style="vertical-align: middle; text-align: center;" |2c 35 (11317)
-|-
-| style="vertical-align: middle; text-align: center;" |Length of Variable Length IO
-| style="vertical-align: middle; text-align: center;" |00 63 (99 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Value of Variable Length IO 11317
-| style="vertical-align: middle; text-align: center;" |
-'''0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc'''
-'''30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90'''
-|-
-| style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records)
-| style="vertical-align: middle; text-align: center;" |01
-|-
-| style="vertical-align: middle; text-align: center;" |CRC-16
-| style="vertical-align: middle; text-align: center;" |00 00 fe f4
-|-
-|}
-===Parsing AVL ID 11317 data===
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL ID 11317 Unparsed data
-|-
-| style="vertical-align: middle; text-align: center;" |<code>'''0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc'''</code>'''<br><code>30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90'''
-|}
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsing the data
-|-
-! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data packet part
-! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part
-|-
-| rowspan="3" |
-| style="vertical-align: middle; text-align: center;" |Constant
-| style="vertical-align: middle; text-align: center;" |01
-|-
-! style="vertical-align: middle; text-align: center;" |Eye Sensor #1 data length
-| style="vertical-align: middle; text-align: center;" |30 (48 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |05 (Eye Sensor Device name)
-|-
-| rowspan="60" style="vertical-align: middle; text-align: center;" |AVL Data
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |0f (15 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |4d 50 31 5f 42 45 32 41 41 35 00 00 00 00 00
-|-
-| style="vertical-align: middle; text-align: center;" | Parameter ID
-| style="vertical-align: middle; text-align: center;" |06 (Eye Sensor #1 temperature)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |d6 08 (With firmware 03.28.04.rev.203 the value is little endian, converted to decimal and multiplied by 0.01C = 22.42C.<br>
-With firmware 03.28.04.rev.204 the value is big endian)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |07 (Eye Sensor #1 Humidity)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |2f (converted to decimal = 47%)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |08 (Eye Sensor #1 Magnet)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |00 (no magnet detected)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |09 (EYE Sensor #1 Movement presence)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" | 01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |00 (none detected)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0a (parameter ID #10, EYE Sensor #1 Movement count)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" | 4e 00 (converted to dec = 19968)
-|-
-| style="vertical-align: middle; text-align: center;" | Parameter ID
-| style="vertical-align: middle; text-align: center;" |0b (Parameter ID #11 Eye Sensor #1 Pitch)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data length
-| style="vertical-align: middle; text-align: center;" | 01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |f9 (converted to decimal = 159 degrees)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0c (Parameter ID #12 Eye sensor #1 Roll)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |5a ff (With firmware 03.28.04.rev.203 the value is Little endian, converted to decimal signed 2's complement =-166 degrees <br>
-With firmware 03.28.04.rev.204 the value is Big Endian)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0d (parameter ID #13 low battery voltage indicator)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |00 (low battery voltage not detected)
-|-
-| style="vertical-align: middle; text-align: center;" | Parameter ID
-| style="vertical-align: middle; text-align: center;" |0e (Eye Sensor #1 battery voltage)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |0b cc (Converted to decimal = 3020 mV)
-|-
-! style="vertical-align: middle; text-align: center;" |Eye Sensor #2 data length
-| style="vertical-align: middle; text-align: center;" | 30 (48 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" | 05 (Eye Sensor Device name)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |0f (15 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |09 (EYE Sensor #1 Movement presence)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |06 (Eye Sensor #1 temperature)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |cb 08 (little endian, converted to decimal and multiplied by 0.01C = 22.51C)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |07 (Eye Sensor #1 Humidity)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |30 (converted to decimal = 48%)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |08 (Eye Sensor #1 Magnet)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" | 00 (no magnet presence detected)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |09 (EYE Sensor #1 Movement presence)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" | 00 (no movement presence detected)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0a (parameter ID #10, EYE Sensor #1 Movement count)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |63 00 (converted to decimal = 25344)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0b (Parameter ID #11 Eye Sensor #1 Pitch)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |00 (converted to dec = 0 degrees)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0c (Parameter ID #12 Eye sensor #1 Roll)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |af 00 (Little endian, converted to decimal signed 2's complement =175 degrees)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |0d (parameter ID #13 low battery voltage indicator)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |00 (low battery voltage not detected)
 |-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | E-Mark (EU)
-| style="vertical-align: middle; text-align: center;" |0e (Eye Sensor #1 battery voltage)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTS_E-Mark|YES]]
 |-
-| style="vertical-align: middle; text-align: center;" |Parameter data length
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | FCC (USA)
-| style="vertical-align: middle; text-align: center;" |02 (2 bytes)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTS_FCC|YES]]
-|-
-| style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |0b 90 (Converted to decimal = 2960mV)
-|-
-|}
-==<p style="font-size:32px"><span style="color:#0054A6">Safety information</span></p>==
-This message contains information on how to operate BTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
-. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.
-. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Helpdesk.<br>
-[[File:Safety information.png]]
-==<p style="font-size:32px"><span style="color:#0054A6">Certification & Approvals</span></p>==
-{| class="wikitable"
-|+
-! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Certificates
-! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links
-! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Valid for Model
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |E-Mark (EU)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_E-Mark|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FCC (USA)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_FCC|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | CE/RED (EU)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_CE_/_RED|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTS_CE_/_RED|YES]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |RoHS (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | RoHS (EU)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_RoHS|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTS_RoHS|YES]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | REACH (EU)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_REACH|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTS_REACH|YES]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Anatel (BR) (PR)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_ANATEL|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |IP rating
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_IP67|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |SIRIM QAS
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_SIRIM QAS|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |SDPPI POSTEL
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_SDPPI POSTEL|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | TELEC
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_TELEC|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ATEX
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_ATEX|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ATEX
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EN12830
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_EN12830|Yes]]
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EN12830
-|}
-==<p style="font-size:32px"><span style="color:#0054A6">Nomenclature & Classification codes</span></p>==
-{| class="wikitable"
-|+
-! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Name
-! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | EAN
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_EAN|Yes]]
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |HS
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_HS|Yes]]
-|-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ECCN
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_ECCN|Yes]]
-|}
-==<p style="font-size:32px"><span style="color:#0054A6">Memberships</span></p>==
-{| class="wikitable"
-|+
-! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Name
-! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth® SIG
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Anatel(EU) (PR)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1 Bluetooth® SIG|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP_ANATEL|YES]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |WEEE
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | IP rating
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1 WEEE|Yes]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTS_E-Mark|YES]]
 |}
 ==<p style="font-size:32px"><span style="color:#0054A6">External Links</span></p>==
-===Product Page===
+=== Product Page ===
 https://teltonika-gps.com/eye/
-===Product Change Notifications===
+=== Product Change Notifications ===
 The latest Product Change Notifications can be found: [[BTSMP1_Product_Change_Notifications|Product Change Notifications]]
-===Software Errata===
+=== Compatibilty with other Teltonika Devices ===
-Firmware Errata: [https://wiki.teltonika-gps.com/view/BTS_firmware_errata BTS firmware errata]
-EYE App Errata: [https://wiki.teltonika-gps.com/view/EYE_APP_errata BTS APP errata]
-===Promotional Material===
-[[EYE Sensor Promotional Material]]
-===Compatibilty with other Teltonika Devices===
 Teltonika Networks:
 https://wiki.teltonika-networks.com/view/Bluetooth_EYE_Sensor_and_EYE_Beacon_support
-https://wiki.teltonika-networks.com/view/Teltonika_EYE_device_pairing_and_data_sender_configuration_example
+=== Partner Providers Supporting Software ===
+* [[3Dtracking with Fleet Management (FM)|3Dtracking]]
-===Partner Providers Supporting Software===
+* [[GPS-server with Fleet Management (FM)|GPS-server]]
-*[[3Dtracking with Fleet Management (FM)|3Dtracking]]
+* [[Gurtam Wialon with Fleet Management (FM)|Gurtam Wialon]]
-*[[GPS-server with Fleet Management (FM)|GPS-server]]
+* [[Mapon with Fleet Management (FM)|Mapon]]
-*[[Wialon with Fleet Management (FM)|Wialon]]
+* [[WhiteLabel Tracking with Fleet Management (FM)|WhiteLabel Tracking]]
-*[[Mapon with Fleet Management (FM)|Mapon]]
-*[[WhiteLabel Tracking with Fleet Management (FM)|WhiteLabel Tracking]]
-==='''[[EYE FAQ|Frequently asked questions (FAQ)]]'''===
-*[[EYE FAQ#Questions%20about%20Power%20and%20Electrical%20characteristics|Questions about Power and Electrical characteristics]]
+=== [[EYE FAQ|Frequently asked questions]] ===
-*[[EYE FAQ#Questions%20about%20EYE%20Accessory%20configuration%20.28EYE%20APP.29|Questions about EYE Accessory configuration (EYE APP)]]
-*[[EYE FAQ#Questions%20about%20FMBxxx%20compatibility%20with%20EYE%20Accessories|Questions about FMBxxx compatibility with EYE Accessories]]
-*[[EYE FAQ#Questions%20about%20Protocols|Questions about Protocols]]
-*[[EYE FAQ#Other%20questions%20.28Questions%20without%20category.29|Other questions  (Questions without category)]]
-===Documents===
+* [[EYE FAQ#Questions%20about%20Power%20and%20Electrical%20characteristics|Questions about Power and Electrical characteristics]]
+* [[EYE FAQ#Questions%20about%20EYE%20Accessory%20configuration%20.28EYE%20APP.29|Questions about EYE Accessory configuration (EYE APP)]]
-{|
+* [[EYE FAQ#Questions%20about%20FMBxxx%20compatibility%20with%20EYE%20Accessories|Questions about FMBxxx compatibility with EYE Accessories]]
-|[[File:pdf_icon.png|32px|]]
+* [[EYE FAQ#Questions%20about%20Protocols|Questions about Protocols]]
-|[[Media:Datasheet-BTSMP1 EYE SENSOR 4.5.pdf|Eye Sensor Datasheet]]
+* [[EYE FAQ#Other%20questions%20.28Questions%20without%20category.29|Other questions  (Questions without category)]]
-|<small>(Updated on: {{{datasheet_date|2024-03-15}}})</small>
-|
-|[[File:pdf_icon.png|32px|]]
-|[[Media:EYE SENSOR ATEX Datasheet V1.0.pdf|Eye Sensor ATEX Datasheet]]
-|<small>(Updated on: {{{datasheet_date|2024-05-29}}})</small>
-|
-|[[File:pdf_icon.png|32px|]]
-|[[Media:EYE SENSOR EN12830 Datasheet 1.0.pdf|Eye Sensor EN12830 Datasheet]]
-|<small>(Updated on: {{{datasheet_date|2024-05-29}}})</small>
-|}
-{|
-|[[File:pdf_icon.png|32px|]]
-|[[Media:QM-BTSMP1.pdf|BTSMP1 Quick Manual (EN)]]
-|<small>(Updated on: {{{datasheet_date|2024-01-17}}})</small>
-|}
-===Downloads===
-{|
-|[[File:zip_icon.png|32px|]]
-|[[Teltonika EN12830 EYE APP|EN12830 EYE APP]]
-|<small>(Updated on: {{{datasheet_date|2024-04-02}}})</small>
-|}
-==Additional information==
+=== Documents ===
-{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}
+==== [https://teltonika-gps.com/datasheet_eye_sensor.pdf Datasheet PDF] ====
-[[Category:Sensors]]
+==== [https://teltonika-gps.com/BTS_Quick_Manual.pdf Quick Manual PDF] ====
+[[Category:EYE Accessories]]

Search