Changes

===FMB Firmware implementation on FMC125===

===FMB Firmware implementation on FMC125===

In order to enable Iridium support on FMB, first it is necessary to enable RS232 support and select “satellite backup” mode. Correct configuration is shown in the picture below.

In order to enable Iridium support on FMB, first it is necessary to enable RS232 support and select “satellite backup” mode. This is available from '''FW''' '''03.28.04.Rev.104'''

 

Correct configuration is shown in the picture below.

[[File:Iridium rs232 parameter config.png|center|500x500 px]]

[[File:Iridium rs232 parameter config.png|center|500x500 px]]

===FMB Firmware configuration on FMX640/FMX641 devices===

===FMB Firmware configuration on FMX640/FMX641 devices===

FMX640 can be setup with Iridium Edge by activating RS232 short burst data parameters, this can be done visiting this tutorial [https://wiki.teltonika-gps.com/view/FMB641_Short_Burst_Data Here].

FMX640 can be setup with Iridium Edge by activating RS232 short burst data parameters, this is available from '''FW''' '''01.02.18.Rev.00'''. It can be done visiting this tutorial [https://wiki.teltonika-gps.com/view/FMB641_Short_Burst_Data Here].  

[[File:FMX640 and RS232 illustration v1.2.png|900x400px]]

[[File:FMX640 and RS232 illustration v1.2.png|900x400px]]