Changes

DIGITAL TACHOGRAPH MONITORING (view source)

Revision as of 14:10, 31 January 2023

105 bytes removed ,  14:10, 31 January 2023
→‎What you need for the solution?
Line 1: Line 1:  
__TOC__
 
__TOC__
   −
==Project description==
+
==Solution description==
 
Millions of trucks roam highways and roads each and every day delivering goods far and wide in our planet. Logistics industry is strictly regulated in most parts of the world and especially in Europe, where digitization of tachographs is mandatory. This makes it a perfect scene for the implementation of remote data download and monitoring solution.
 
Millions of trucks roam highways and roads each and every day delivering goods far and wide in our planet. Logistics industry is strictly regulated in most parts of the world and especially in Europe, where digitization of tachographs is mandatory. This makes it a perfect scene for the implementation of remote data download and monitoring solution.
   Line 8: Line 8:  
Here you will find how to prepare and to test this solution.
 
Here you will find how to prepare and to test this solution.
   −
==What you need for a solution?==
+
==What you need for the solution?==
    
The first component of our solution is a device from Teltonika’s Professional devices family:
 
The first component of our solution is a device from Teltonika’s Professional devices family:
Line 22: Line 22:  
Any of these devices can receive tachograph and driver card files (.DDD, TGD, .V1B .C1B formats), tacho live data, and enriched Tacho/FMS data (TachoCAN) from digital tachograph via the same CAN line – it makes installation even easier. Also, the devices are capable of reading live data from digital tachograph via the K-line connection.  
 
Any of these devices can receive tachograph and driver card files (.DDD, TGD, .V1B .C1B formats), tacho live data, and enriched Tacho/FMS data (TachoCAN) from digital tachograph via the same CAN line – it makes installation even easier. Also, the devices are capable of reading live data from digital tachograph via the K-line connection.  
   −
The next component is software dedicated to downloading and administrating digital tachograph files. There are two ways to do it. You can use special [https://teltonika-gps.com/product/tachograph-web/ Web Tacho] platform from Teltonika or develop your own software. In case you choose the latter scenario, you will be provided with a special communication protocol, which you will use when developing software solution. In case you choose [https://wiki.teltonika-gps.com/view/WEB_Tacho Teltonika Web Tacho] solution, you will be able to use our server or have application installed on your side. Either way, you are ready to go.
+
The next component is software dedicated to downloading and administrating digital tachograph files. There are two ways to do it. You can use special [https://teltonika-gps.com/product/tachograph-web/ Web Tacho] platform from Teltonika Telematics or develop your own software. In case you choose the latter scenario, you would require a special communication protocol, which you will use when developing software solution. In case you choose [https://wiki.teltonika-gps.com/view/WEB_Tacho Web Tacho] solution, you have an option to store your data on our server or have application installed on your side. Our sales managers can clarify distribution conditions both for Web Tacho and for the communication protocol.
    
Moreover, with the help of additional accessory [https://teltonika-gps.com/product/tachograph-front-panel-cable/ Tacho Front Panel Cable] you will be able to read data from the minibuses that work on 12V system. Activate the front panel interface on tachograph, connect the cable and you are ready to go.
 
Moreover, with the help of additional accessory [https://teltonika-gps.com/product/tachograph-front-panel-cable/ Tacho Front Panel Cable] you will be able to read data from the minibuses that work on 12V system. Activate the front panel interface on tachograph, connect the cable and you are ready to go.
   −
==Mounting recommendations==
+
==Intallation==
      Line 63: Line 63:  
==='''1. Prerequisites:'''===
 
==='''1. Prerequisites:'''===
   −
====1.1. Read through [https://wiki.teltonika-gps.com/view/FMB001_First_Start First start guide]====
+
====1.1. Read through [https://wiki.teltonika-gps.com/view/FMB640_First_Start First start guide]====
−
====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB001_System_settings#Sleep_Mode Sleep modes].====
+
 
 +
====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB640_System_settings#Sleep_Mode Sleep modes].====
 
<br>
 
<br>
 +
 
==='''2. Configuring FMX6XX:'''===
 
==='''2. Configuring FMX6XX:'''===
   Line 86: Line 88:  
The second main parameter to configure is the movement source and ignition source.
 
The second main parameter to configure is the movement source and ignition source.
   −
Movement source parameter, which determines if the device should work in "Vehicle on Stop" or "Vehicle on Moving" mode. There are four possible movement sources:
+
Movement source parameter determines if the device should work in "Vehicle on Stop" or "Vehicle on Moving" mode. There are four possible movement sources:
    
* Ignition - if Ignition (based on Ignition Source) is ON, Vehicle MOVING mode is used; if Ignition is OFF, Vehicle on STOP mode is used;
 
* Ignition - if Ignition (based on Ignition Source) is ON, Vehicle MOVING mode is used; if Ignition is OFF, Vehicle on STOP mode is used;
Line 93: Line 95:  
* CAN Speed - if CAN adapter or FMS speed is >0 km/h, Vehicle MOVING mode is used; if CAN adapter or FMS speed is <=0 km/h, Vehicle on STOP mode is used;
 
* CAN Speed - if CAN adapter or FMS speed is >0 km/h, Vehicle MOVING mode is used; if CAN adapter or FMS speed is <=0 km/h, Vehicle on STOP mode is used;
   −
An ignition source will be used to determine the ignition of the vehicle. If voltage is between High Voltage Lever and Low Voltage Level (below Ignition Settings options) - ignition is ON. If voltage is higher than High Voltage Lever or lower than Low Voltage Level - ignition is OFF.
+
An ignition source will be used to determine the ignition of the vehicle.  
   −
* Digital Input 1 - if Digital Input 1 is 1 - ignition is ON; if Digital Input 1 value is 0 - ignition is OFF;
+
* Digital Input 1 - if Digital Input 1 value  is 1 - ignition is ON; if Digital Input 1 value is 0 - ignition is OFF;
−
* Digital Input 2 - if Digital Input 2 is 1 - ignition is ON; if Digital Input 2 value is 0 - ignition is OFF;
+
* Digital Input 2 - if Digital Input 2 value  is 1 - ignition is ON; if Digital Input 2 value is 0 - ignition is OFF;
−
* Digital Input 3 - if Digital Input 3 is 1 - ignition is ON; if Digital Input 3 value is 0 - ignition is OFF;
+
* Digital Input 3 - if Digital Input 3 value  is 1 - ignition is ON; if Digital Input 3 value is 0 - ignition is OFF;
−
* Digital Input 4 - if Digital Input 4 is 1 - ignition is ON; if Digital Input 4 value is 0 - ignition is OFF;
+
* Digital Input 4 - if Digital Input 4 value  is 1 - ignition is ON; if Digital Input 4 value is 0 - ignition is OFF;
 
* Power Voltage - if the voltage is between High Voltage Lever and Low Voltage Level (below Ignition Settings options) - ignition is ON; if the voltage is higher than High Voltage Lever or lower than Low Voltage Level - ignition is OFF.
 
* Power Voltage - if the voltage is between High Voltage Lever and Low Voltage Level (below Ignition Settings options) - ignition is ON; if the voltage is higher than High Voltage Lever or lower than Low Voltage Level - ignition is OFF.
 
* Movement - if Movement is still detected 1 after Movement Start Delay (s) - ignition is ON; if Movement value is 0 after Movement Stop Delay (s) - ignition is OFF;
 
* Movement - if Movement is still detected 1 after Movement Start Delay (s) - ignition is ON; if Movement value is 0 after Movement Stop Delay (s) - ignition is OFF;
Line 124: Line 126:  
Status - functionality enabling;<br />
 
Status - functionality enabling;<br />
   −
Domain – server domain where files will be send;<br />
+
Domain – server domain where files will be sent;<br />
   −
Port – server port where files will be send;<br />
+
Port – server port where files will be sent;<br />
    
Start delay – delay after turning on ignition to start procedure of file sending.<br />
 
Start delay – delay after turning on ignition to start procedure of file sending.<br />
Line 255: Line 257:  
[[Image:Tacho_version_1.PNG|800px|center]]
 
[[Image:Tacho_version_1.PNG|800px|center]]
   −
==Parsing Digital Tachograph monitoring records==
+
==Parsing information==
    
==='''1.Prerequisites:'''===
 
==='''1.Prerequisites:'''===
Line 262: Line 264:     
==== 1.2. Go to [https://wiki.teltonika-gps.com/view/Java_Parser_First_Start_Guide Java parser first start guide]====
 
==== 1.2. Go to [https://wiki.teltonika-gps.com/view/Java_Parser_First_Start_Guide Java parser first start guide]====
 +
 +
[[Category: Usage scenarios]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/65614...79841"

Navigation menu