Wiki Knowledge Base | Teltonika GPS

Changes

Speed Limiting Solution MSP500+ETC (view source)

Revision as of 16:27, 28 December 2023

3,978 bytes added ,  16:27, 28 December 2023
m
Text replacement - "Bluetooth(?!®)" to "Bluetooth®"
Line 7: Line 7:  
Utilizing a modern and comprehensive GPS tracking method allows you to monitor driver (including novice) behaviour, improve safety, and reduce the fleet running costs and legal liability. And that is where Teltonika '''MSP500''' comes into the play.
 
Utilizing a modern and comprehensive GPS tracking method allows you to monitor driver (including novice) behaviour, improve safety, and reduce the fleet running costs and legal liability. And that is where Teltonika '''MSP500''' comes into the play.
   −
Teltonika '''MSP500''' is a special tracking terminal with GNSS/GSM/Bluetooth 4.0 connectivity, internal GNSS/GSM antennas, RS232 interface, internal Ni-Mh battery, and waterproof IP65 casing. The device has been specifically designed with the key feature – speed limiting control.
+
Teltonika '''MSP500''' is a special tracking terminal with GNSS/GSM/Bluetooth® 4.0 connectivity, internal GNSS/GSM antennas, RS232 interface, internal Ni-Mh battery, and waterproof IP65 casing. The device has been specifically designed with the key feature – speed limiting control.
    
==What you need for a solution?==
 
==What you need for a solution?==
   −
*'''[https://wiki.teltonika-gps.com/view/MSP500 MSP500]''' device
+
*'''[https://wiki.teltonika-gps.com/view/MSP500 MSP500]''' device.
−
 
+
*<nowiki></nowiki>'''Electronic Throttle Controller.'''
−
*The '''[https://wiki.teltonika-gps.com/view/MSP500_First_Start#How_to_insert_Micro-SIM_card_and_connect_the_battery SIM card]''' in order to get data to your server
+
*The '''[https://wiki.teltonika-gps.com/view/MSP500_First_Start#How_to_insert_Micro-SIM_card_and_connect_the_battery SIM card]''' in order to get data to your server.
 
*[https://wiki.teltonika-gps.com/view/FOTA_WEB '''FOTA WEB'''] to remotely send the configuration to the device.
 
*[https://wiki.teltonika-gps.com/view/FOTA_WEB '''FOTA WEB'''] to remotely send the configuration to the device.
−
*<nowiki>*</nowiki>'''Solenoid Valve'''
+
*<nowiki>*</nowiki>'''Solenoid Valve.'''
      Line 43: Line 43:  
*When the module is connected, be sure to measure the voltage again if it did not decrease.
 
*When the module is connected, be sure to measure the voltage again if it did not decrease.
 
*The ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.<br>
 
*The ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.<br>
 +
 +
==ETC Connections==
 +
 +
==='''1. ETC connection between vehicle ECU and Accelerator Pedal:'''===
 +
 +
*Test the connection between ECU and Accelerator Pedal to detect the +V and -V wires using Multimeter.
 +
*Unplug vehicle battery cable before connecting ETC and MSP500.
 +
*Connect wires as per the following sequence.
 +
 +
{| class="wikitable"
 +
|+
 +
! style="width:20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |ETC cable color
 +
! style="width:40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Connection
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#D5D5D5"><b>White</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | V-/0.40V from Accelerator pedal
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:brown"><b>Brown</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | V+/0.70V from Accelerator Pedal
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#D8D800"><b>Yellow</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | S+/0.70V from ECU
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:grey"><b>Grey</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | S-/0.40V from ECU
 +
|-
 +
|}
 +
 +
[[File:ETC_ECU and Accelerator Pedal.png|none|thumb|800x520px]]
 +
'''Note:''' Voltage may vary depending on vehicle model.
 +
 +
 +
[[File:ETC.mp4|none|thumb|1920x1080px]]
 +
''In this tested vehicle. Voltages of the connections between ECU and Accelerator Pedal are (+) 0.49V and (-) 0.25V.''
 +
 +
==='''2. ETC connection with MSP500:'''===
 +
 +
*Use a cable extension (optional) to connect ETC with MSP500.
 +
*Connect wires as per the following sequence.
 +
 +
{| class="wikitable"
 +
|+
 +
! style="width:20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |ETC cable color
 +
! style="width:40%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Connection
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:red"><b>Red</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |+VDC (+10...32) (COM Relay of MSP500)
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:black"><b>Black</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Ground (Ground of MSP500)
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:green"><b>Green</b></span>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |NC Relay of MSP500
 +
|-
 +
|}
 +
 +
[[File:ETC2.png|none|thumb|800x520px]]
 +
 +
 +
==ETC Calibration==
 +
 +
*Plug vehicle battery cable.
 +
*Start the vehicle engine for ETC calibration.
 +
*Open ETC and press the calibration button for 3 seconds to store the IDLE voltage coming from the accelerator pedal.
 +
 +
[[File:Calibration Button.mp4|none|thumb|1920x1080px]]
 +
    
==Configuration==
 
==Configuration==
Line 87: Line 154:  
To setup the speed limiting feature in the configurator we should navigate to '''Features → Over Speeding''' where we would set a priority for the event, speed source and DOUT 1 for the relay to work properly.
 
To setup the speed limiting feature in the configurator we should navigate to '''Features → Over Speeding''' where we would set a priority for the event, speed source and DOUT 1 for the relay to work properly.
   −
[[File:Overspeeding feature.png|left|thumb]]
+
[[File:Overspeeding-GNSS.png|left|thumb]]
 +
[[File:Overspeeding-AIN1.png|left|thumb]]
 +
 
    
<br />
 
<br />
 
Over speeding settings
 
Over speeding settings
   −
*<span style="background:#1cbef4">11100</span> – Scenario settings(0 – Disable, 1 – Low Priority, 2 – High Priority, 3 – Panic Priority)
+
*<span style="background:#1cbef4">11100</span> – Scenario settings (0 – Disable, 1 – Low Priority, 2 – '''High Priority''' (Default), 3 – Panic Priority)
−
*<span style="background:#f47a8a">11104</span> - Max Speed (Default value - 90 km/h)
+
*<span style="background:#f47a8a">11104</span> - Max Speed (Default value - 90 km/h), here we tested on '''40 km/h'''
−
*<span style="background:#c16c2d">13217</span> - Speed Source (0 - GNSS (Default), 1 - OBD, 2 - AIN1)
+
*<span style="background:#c16c2d">13217</span> - Speed Source (0 - '''GNSS''' (Default), 1 - OBD, 2 - AIN1)
−
*<span style="background:#f63a0e">13223</span> - Over speeding Hysteresis (Default value - 8%), value that determines what would be the threshold speed level that would activate the speed limiting feature
+
In case of '''AIN1''', if you use only A2 - the formula would look like ''Speed = A2 * Pulses''
−
*<span style="background:#33be9e">11103</span> - Output Control (0 - None (Default), 1 - DOUT1), DOUT1 needs to be enabled to use the speed limiting feature
+
*<span style="background:#f63a0e">13223</span> - Over speeding Hysteresis (Default value - '''8%'''), value that determines what would be the threshold speed level that would activate the speed limiting feature
 +
*<span style="background:#33be9e">11103</span> - Output Control (0 - None (Default), 1 - DOUT1), '''DOUT1''' needs to be enabled to use the speed limiting feature
       
<br />
 
<br />
 +
 +
 +
 +
 +
 +
 +
 +
 +
      Line 112: Line 191:  
'''Quickstart:''' From default configuration to Speed Limiting solution in one SMS:
 
'''Quickstart:''' From default configuration to Speed Limiting solution in one SMS:
   −
  "  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_user;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0;<span style="background:#05CC6F">102</span>:3;<span style="background:#1cbef4">11100</span>:2;<span style="background:#f47a8a">11104</span>:90;<span style="background:#c16c2d">13217</span>:0;<span style="background:#f63a0e">13223</span>:8;<span style="background:#33be9e">11103</span>:1"
+
  "  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_user;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0;<span style="background:#05CC6F">102</span>:3;<span style="background:#1cbef4">11100</span>:2;<span style="background:#f47a8a">11104</span>:40;<span style="background:#c16c2d">13217</span>:0;<span style="background:#f63a0e">13223</span>:8;<span style="background:#33be9e">11103</span>:1"
 
<br />
 
<br />
 
This SMS will set up your device to report the Speed Limiting scenario to the server.
 
This SMS will set up your device to report the Speed Limiting scenario to the server.
Line 118: Line 197:  
'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings.
 
'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings.
    +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
==Testing==
 +
==='''1. Relay test:'''===
 +
*Go to Maintenance. 
 +
*Switch DOUT 1 option to ON when pressing the accelerator pedal.
 +
*RPM should be decreased to idle when the relay is ON.
 +
 +
[[File:Relay OFF.png|none|thumb|800x556px]]
 +
[[File:Relay ON.png|none|thumb|800x556px]]
 +
 +
==='''2. Road test:'''===
 +
*We tested the over speed scenario on '''40 km/h''' using '''GNSS''' as a speed source.
 +
*The AVL ID of over speeding scenario is '''io_255'''.
 +
*In this scenario we monitored the speed change from 39 km/h to 41 km/h
 +
*A record has been sent with the over speeding event io_255 when the speed exceed/fall behind 40 km/h.
    
==Parsing information==
 
==Parsing information==
   −
==='''1.Prerequisites:'''===
+
==='''1. Prerequisites:'''===
    
====1.1.  Open [https://wiki.teltonika-gps.com/view/Opening_TCP/UDP_port TCP/UDP port]====
 
====1.1.  Open [https://wiki.teltonika-gps.com/view/Opening_TCP/UDP_port TCP/UDP port]====
Line 132: Line 247:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |
 
| style="vertical-align: middle; text-align: center;" |
−
00000000000000758E010000017CB7A57370000F0E53AE209AB86A007F00110D0000<span style="background:#c668ae">00FF</span>0015000800EF0100F00100500100150300C80000450100010000B30100 0A00B5000A00B6000600423FC900180000004300000044000000
+
000000000000005E8E010000017DE72C308A012100F6F60EF8A0FE0000008F0A0029<span style="background:#c668ae">00FF</span>0010000700EF0100F00100150200C80000450101F600<span style="background:#91b9d4">00FF</span><span style="background:#738454">29</span>000500B5 000F00B60008004238D500431F5000440027000200F10000A5A200100000BF7B000000000100006D90
−
1100220012FFBA0013FC34000F0000000200F10000601A0010002D97E0000000000100002136
      
|}
 
|}
Line 145: Line 259:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Data Field Length
 
| style="vertical-align: middle; text-align: center;" |Data Field Length
−
| style="vertical-align: middle; text-align: center;" | 00 00 00 75
+
| style="vertical-align: middle; text-align: center;" | 00 00 00 5E
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Codec ID
 
| style="vertical-align: middle; text-align: center;" |Codec ID
Line 154: Line 268:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Timestamp
 
| style="vertical-align: middle; text-align: center;" |Timestamp
−
| style="vertical-align: middle; text-align: center;" |00 00 01 7C B7 A5 73 70 00 (Monday, October 25, 2021 4:30:46 PM GMT+03:00)
+
| style="vertical-align: middle; text-align: center;" |00 00 01 7D E7 2C 30 8A (Thursday, December 23, 2021 12:02:52 PM GMT+04:00)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Priority
 
| style="vertical-align: middle; text-align: center;" |Priority
−
| style="vertical-align: middle; text-align: center;" |00
+
| style="vertical-align: middle; text-align: center;" |01
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Longitude
 
| style="vertical-align: middle; text-align: center;" |Longitude
−
| style="vertical-align: middle; text-align: center;" | 0F 0E 53 AE
+
| style="vertical-align: middle; text-align: center;" |21 00 F6 F6
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Latitude
 
| style="vertical-align: middle; text-align: center;" |Latitude
−
| style="vertical-align: middle; text-align: center;" | 20 9A B8 6A
+
| style="vertical-align: middle; text-align: center;" |0E F8 A0 FE
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Altitude
 
| style="vertical-align: middle; text-align: center;" |Altitude
−
| style="vertical-align: middle; text-align: center;" |00 7F
+
| style="vertical-align: middle; text-align: center;" |00 00
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Angle
 
| style="vertical-align: middle; text-align: center;" |Angle
−
| style="vertical-align: middle; text-align: center;" |00 11
+
| style="vertical-align: middle; text-align: center;" |00 8F
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Satellites
 
| style="vertical-align: middle; text-align: center;" |Satellites
−
| style="vertical-align: middle; text-align: center;" |0D
+
| style="vertical-align: middle; text-align: center;" |0A
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Speed
 
| style="vertical-align: middle; text-align: center;" |Speed
−
| style="vertical-align: middle; text-align: center;" |00 00
+
| style="vertical-align: middle; text-align: center;" |00 29
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |Event IO ID
 
| style="vertical-align: middle; text-align: center;" |Event IO ID
Line 181: Line 295:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |N of Total ID
 
| style="vertical-align: middle; text-align: center;" |N of Total ID
−
| style="vertical-align: middle; text-align: center;" |00 15
+
| style="vertical-align: middle; text-align: center;" |00 0E
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
 
| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
−
| style="vertical-align: middle; text-align: center;" |00 08
+
| style="vertical-align: middle; text-align: center;" |00 07
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
−
| style="vertical-align: middle; text-align: center;" | EF (AVL ID: 239, Name: Ignition)
+
| style="vertical-align: middle; text-align: center;" |00 EF (AVL ID: 239, Name: Ignition)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
Line 193: Line 307:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
−
| style="vertical-align: middle; text-align: center;" |F0  (AVL ID: 240, Name: Movement)
+
| style="vertical-align: middle; text-align: center;" |00 F0  (AVL ID: 240, Name: Movement)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |01
 
| style="vertical-align: middle; text-align: center;" |01
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
+
| style="vertical-align: middle; text-align: center;" |3'rd IO ID
−
| style="vertical-align: middle; text-align: center;" |50 (AVL ID: 80, Name: Data Mode)
+
| style="vertical-align: middle; text-align: center;" |00 15 (AVL ID: 21, Name: GSM Signal)
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
+
| style="vertical-align: middle; text-align: center;" |3'rd IO Value
−
| style="vertical-align: middle; text-align: center;" |01
+
| style="vertical-align: middle; text-align: center;" |02
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
−
| style="vertical-align: middle; text-align: center;" |15 (AVL ID: 21, Name: GSM Signal)
+
| style="vertical-align: middle; text-align: center;" |00 C8 (AVL ID: 200, Name: Sleep Mode)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
−
| style="vertical-align: middle; text-align: center;" |01
+
| style="vertical-align: middle; text-align: center;" |00
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
−
| style="vertical-align: middle; text-align: center;" | C8 (AVL ID: 200, Name: Sleep Mode)
+
| style="vertical-align: middle; text-align: center;" |00 45 (AVL ID: 69, Name: GNSS Status)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
−
| style="vertical-align: middle; text-align: center;" |00
+
| style="vertical-align: middle; text-align: center;" |01
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |6'th IO ID
 
| style="vertical-align: middle; text-align: center;" |6'th IO ID
−
| style="vertical-align: middle; text-align: center;" | 45 (AVL ID: 69, Name: GNSS Status)
+
| style="vertical-align: middle; text-align: center;" |01 F6 (AVL ID: 502, Name: MSP500 Speed Sensor Status)
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | 6'th IO Value
+
| style="vertical-align: middle; text-align: center;" |6'th IO Value
 
| style="vertical-align: middle; text-align: center;" |00
 
| style="vertical-align: middle; text-align: center;" |00
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |7'th IO ID
 
| style="vertical-align: middle; text-align: center;" |7'th IO ID
−
| style="vertical-align: middle; text-align: center;" |01 (AVL ID: 1, Name: Digital Input 1)
+
| style="vertical-align: middle; text-align: center;" |<span style="background:#91b9d4">00 FF</span> (AVL ID: 255, Name: Over Speeding)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |7'th IO Value
 
| style="vertical-align: middle; text-align: center;" |7'th IO Value
−
| style="vertical-align: middle; text-align: center;" |01
+
| style="vertical-align: middle; text-align: center;" |<span style="background:#738454">29</span> (Speed is 41 km/h)
−
|-
  −
| style="vertical-align: middle; text-align: center;" |8'th IO ID
  −
| style="vertical-align: middle; text-align: center;" | B3 (AVL ID: 179, Name: Digital Output 1 )
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |01
   
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |N2 of Two Byte IO
 
| style="vertical-align: middle; text-align: center;" |N2 of Two Byte IO
−
| style="vertical-align: middle; text-align: center;" |0A
+
| style="vertical-align: middle; text-align: center;" |00 05
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
 
| style="vertical-align: middle; text-align: center;" |1’st IO ID
−
| style="vertical-align: middle; text-align: center;" | B5 (AVL ID: 181, Name: GNSS PDOP)
+
| style="vertical-align: middle; text-align: center;" |00 B5 (AVL ID: 181, Name: GNSS PDOP)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
−
| style="vertical-align: middle; text-align: center;" |00 0A
+
| style="vertical-align: middle; text-align: center;" |00 0F
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
−
| style="vertical-align: middle; text-align: center;" | B6 (AVL ID: 182, Name: GNSS HDOP)
+
| style="vertical-align: middle; text-align: center;" |00 B6 (AVL ID: 182, Name: GNSS HDOP)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
−
| style="vertical-align: middle; text-align: center;" |00 06
+
| style="vertical-align: middle; text-align: center;" |00 08
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
 
| style="vertical-align: middle; text-align: center;" |3’rd IO ID
−
| style="vertical-align: middle; text-align: center;" |42 (AVL ID: 66, Name: External Voltage)
+
| style="vertical-align: middle; text-align: center;" |00 42 (AVL ID: 66, Name: External Voltage)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
 
| style="vertical-align: middle; text-align: center;" |3’rd IO Value
−
| style="vertical-align: middle; text-align: center;" |3F C9
+
| style="vertical-align: middle; text-align: center;" |38 D5
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
 
| style="vertical-align: middle; text-align: center;" |4'th IO ID
−
| style="vertical-align: middle; text-align: center;" |18 (AVL ID: 24, Speed)
+
| style="vertical-align: middle; text-align: center;" |00 43 (AVL ID: 67, Battery Voltage)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
 
| style="vertical-align: middle; text-align: center;" |4'th IO Value
−
| style="vertical-align: middle; text-align: center;" |5F
+
| style="vertical-align: middle; text-align: center;" |1F 50
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
 
| style="vertical-align: middle; text-align: center;" |5'th IO ID
−
| style="vertical-align: middle; text-align: center;" |43 (AVL ID: 67, Battery Voltage)
+
| style="vertical-align: middle; text-align: center;" |00 44 (AVL ID: 68, Battery Current)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
 
| style="vertical-align: middle; text-align: center;" |5'th IO Value
−
| style="vertical-align: middle; text-align: center;" |00 07
+
| style="vertical-align: middle; text-align: center;" |00 27
−
|-
  −
| style="vertical-align: middle; text-align: center;" |6'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |44 (AVL ID: 68, Battery Current)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |6'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 C8
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |11 (AVL ID:17, Axis X)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |7’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 22
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |12 (AVL ID:18, Axis Y)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |8’th IO Value
  −
| style="vertical-align: middle; text-align: center;" |FF BA
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |9'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |13 (AVL ID:19, Axis Z)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" | 9'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |FC 34
  −
|-
  −
| style="vertical-align: middle; text-align: center;" |10'th IO ID
  −
| style="vertical-align: middle; text-align: center;" |0F (AVL ID: 15, ECO Score)
  −
|-
  −
| style="vertical-align: middle; text-align: center;" | 10'th IO Value
  −
| style="vertical-align: middle; text-align: center;" |00 00
   
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" | N4 of Four Byte IO
 
| style="vertical-align: middle; text-align: center;" | N4 of Four Byte IO
Line 301: Line 379:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1'st IO ID
 
| style="vertical-align: middle; text-align: center;" |1'st IO ID
−
| style="vertical-align: middle; text-align: center;" | F1 (AVL ID: 241, Name: Active GSM Operator)
+
| style="vertical-align: middle; text-align: center;" |00 F1 (AVL ID: 241, Name: Active GSM Operator)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
 
| style="vertical-align: middle; text-align: center;" |1’st IO Value
−
| style="vertical-align: middle; text-align: center;" | 00 00 00 10
+
| style="vertical-align: middle; text-align: center;" |00 00 A5 A2
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
 
| style="vertical-align: middle; text-align: center;" |2’nd IO ID
−
| style="vertical-align: middle; text-align: center;" |10 (AVL ID: 16, Name: Total Odometer)
+
| style="vertical-align: middle; text-align: center;" |00 10 (AVL ID: 16, Name: Total Odometer)
 
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
 
| style="vertical-align: middle; text-align: center;" |2’nd IO Value
−
| style="vertical-align: middle; text-align: center;" |00 2D 97 E0
+
| style="vertical-align: middle; text-align: center;" |00 00 BF 7B
 
|-
 
|-
−
| style="vertical-align: middle; text-align: center;" | N8 of Eight Byte IO
+
| style="vertical-align: middle; text-align: center;" |N8 of Eight Byte IO
 
| style="vertical-align: middle; text-align: center;" |00 00
 
| style="vertical-align: middle; text-align: center;" |00 00
 
|-
 
|-
Line 322: Line 400:  
|-
 
|-
 
| style="vertical-align: middle; text-align: center;" |CRC-16
 
| style="vertical-align: middle; text-align: center;" |CRC-16
−
| style="vertical-align: middle; text-align: center;" |00 00 7F CF
+
| style="vertical-align: middle; text-align: center;" |00 00 6D 90
 
|}
 
|}
−
==Demonstration in TAVL platform ==
+
 
 +
==Demonstration in Wialon platform==
 +
<br />Wialon: Open Wialon application → Select Messages → Select Unit → Select the date interval → Select Chart → Select io_255.
 +
<br />
 +
 
 +
[[File:Wialon io.png|none|thumb|618x436px]]
 +
[[File:Wialon Overspeed.png|none|thumb|800x542px]]
 +
 
 +
 
 +
==Demonstration in Flespi platform==
 +
<br />Flespi: Open Flespi application → Select Device → Select Logs & Messages → Select the record interval → Tap to see all information.
 +
<br />
 +
 
 +
[[File:Flespi.mp4|none|thumb|1920x1080px]]
 +
 
 +
 
 +
==Demonstration in TAVL platform==
 
<br />TAVL: Open TAVL application → Select Client → Select Device → Select the date interval → Select Track→ Select Advanced → Chose Show button see in left down corner all the information.
 
<br />TAVL: Open TAVL application → Select Client → Select Device → Select the date interval → Select Track→ Select Advanced → Chose Show button see in left down corner all the information.
 
<br />
 
<br />
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/85248...94385"