Difference between revisions of "Starting with Teltonika Telematics"

From Wiki Knowledge Base | Teltonika GPS
(27 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
=='''Firmware'''==
 
=='''Firmware'''==
−
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
−
|<strong>How do I send SMS command to Teltonika Telematics device? </strong>
 
−
|-
 
−
|There is a certain structure that the command has to follow:
 
−
 
−
For example, if we would want to send SMS command getinfo:
 
−
 
−
If you have set SMS login and password: <strong>login pass getinfo</strong>
 
−
 
−
If SMS login and password are not set leave two spaces before command:  <strong>getinfo</strong>
 
−
|}
 
−
 
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
|<strong>Can we delete records from the device memory? </strong>
 
|<strong>Can we delete records from the device memory? </strong>
 
|-
 
|-
−
|You can clear device's memory by clicking the "format" button in the [Status] window. This will delete all stored records from the device's memory. You can also send the SMS command "sdformat" to the device and it will do the same thing but remotely without the need to connect the device to a computer.
+
|You can clear devices memory by clicking "format" button in [Status] window. This will delete all stored records and start anew. You can also send SMS command "sdformat" to the device and it will do the same thing but remotely without the need to connect device to a computer.
 
|}
 
|}
  
Line 23: Line 11:
 
|No, but it is possible to retrieve the battery voltage and estimate the remaining battery life.
 
|No, but it is possible to retrieve the battery voltage and estimate the remaining battery life.
 
More information about it can be found here: [https://wiki.teltonika-gps.com/view/EYE_FAQ#How_does_the_battery_voltage_translate_into_the_percentage_of_the_battery.3F How does the battery voltage translate into the percentage of the battery?]
 
More information about it can be found here: [https://wiki.teltonika-gps.com/view/EYE_FAQ#How_does_the_battery_voltage_translate_into_the_percentage_of_the_battery.3F How does the battery voltage translate into the percentage of the battery?]
−
 
 
Both EYE sensors and EYE Beacons can advertise their battery voltage
 
Both EYE sensors and EYE Beacons can advertise their battery voltage
 
|}
 
|}
Line 30: Line 17:
 
|<strong>What is Autoscan and with how many Teltonika device models is this possible? </strong>
 
|<strong>What is Autoscan and with how many Teltonika device models is this possible? </strong>
 
|-
 
|-
−
|Autoscan is the process of scanning for CANBUS program numbers in the vehicle CANBUS system. Currently, FMB140 and newest external CAN adapters have the Autoscan feature.
+
|Autoscan is the process of scanning for CANBUS program numbers in the vehicle CANBUS system. Currently, FMB140 has the Autoscan feature.
 
|}
 
|}
  
Line 41: Line 28:
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>How to activate digital output with SMS command? What commands are available? </strong>
+
|<strong>How to activate digital output with SMS command? What commands are available for FMB920? </strong>
 
|-
 
|-
−
| To set digital output use the setdigout command. A description of this command can be found here: [https://wiki.teltonika-gps.com/view/FMB_setdigout FMB_setdigout]
+
| Supported commands can be found here: https://wiki.teltonika-gps.com/view/FMB920_SMS/GPRS_Commands
 +
To set digital output use the setdigout command. A description of this command can be found here: https://wiki.teltonika-gps.com/view/FMB_setdigout
 
|}
 
|}
  
Line 49: Line 37:
 
|<strong>What is the difference between Fuel consumed and Fuel consumed (Counted) or Total mileage and Total Mileage (Counted)? </strong>
 
|<strong>What is the difference between Fuel consumed and Fuel consumed (Counted) or Total mileage and Total Mileage (Counted)? </strong>
 
|-
 
|-
−
| Fuel consumed is the total fuel consumed by the vehicle since it was manufactured, while fuel consumed (counted) is the fuel consumed by the vehicle since the CAN device was installed.
+
| Fuel consumed is the total fuel consumed by the vehicle since manufacturing while fuel consumed (counted) is the fuel consumed by the vehicle since the CAN device was installed.
−
Total mileage is the total mileage of the vehicle as displayed on the dashboard of the vehicle since it was manufactured, while total mileage (counted) is the mileage of the vehicle from when the CAN device was installed.
+
Total mileage is the total mileage of the vehicle as displayed in the dashboard since manufacture, while total mileage (counted) is the mileage of the vehicle from when the CAN device was installed.
 
|}
 
|}
  
Line 57: Line 45:
 
|-
 
|-
 
| Yes, Iridium Edge does work with the FMC125 devices - the 03.28.06.Rev.323 firmware has to be used for this solution to work.
 
| Yes, Iridium Edge does work with the FMC125 devices - the 03.28.06.Rev.323 firmware has to be used for this solution to work.
−
More information about the Iridium Edge solution can be found here: [[Iridium Edge]]
+
More information about the Iridium Edge solution can be found here: https://wiki.teltonika-gps.com/view/Iridium_Edge
 
|}
 
|}
  
Line 64: Line 52:
 
|-
 
|-
 
| Yes, our devices have TLS encryption capability, which allows us to secure the data using TLS certificates that are uploaded to the device and the server.
 
| Yes, our devices have TLS encryption capability, which allows us to secure the data using TLS certificates that are uploaded to the device and the server.
−
More information about TLS encryption can be found here: [https://wiki.teltonika-gps.com/view/FMB130_GPRS_settings#TLS.2FDTLS TLS settings]
+
More information about TLS encryption can be found here: https://wiki.teltonika-gps.com/view/FMB130_GPRS_settings#TLS.2FDTLS
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Is there a way to encrypt the data that is sent to the server? </strong>
 +
|-
 +
| Yes, our devices have TLS encryption capability, which allows us to secure the data using TLS certificates that are uploaded to the device and the server.
 +
More information about TLS encryption can be found here: https://wiki.teltonika-gps.com/view/FMB130_GPRS_settings#TLS.2FDTLS
 
|}
 
|}
  
Line 70: Line 65:
 
|<strong>Can we check how much data has been used with the current data plan? </strong>
 
|<strong>Can we check how much data has been used with the current data plan? </strong>
 
|-
 
|-
−
| In the configurator Status tab, we have the GPRS traffic section, where data usage can be seen.
+
| In the configurator Status tab we have the GPRS traffic section, where data usage can be seen. Other than this, there is no way to get the data consumption from the device - this information will be available from the network provider.
−
Other than this, there is no way to get the data consumption from the device - this information will be available from the network provider.
 
 
|}
 
|}
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>Is there a way to implement seat belt detection with a device with only one digital input? </strong>
+
|<strong>Can we check how much data has been used with the current data plan? </strong>
 +
|-
 +
| In the configurator Status tab we have the GPRS traffic section, where data usage can be seen. Other than this, there is no way to get the data consumption from the device - this information will be available from the network provider.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Is there a way to implement seat belt detection with FMC920 device? </strong>
 
|-
 
|-
 
| There are 2 methods we can follow:
 
| There are 2 methods we can follow:
  
−
1. Digital Input: if the device only has 1 Digital input which is mostly used to connect the ignition cable, In this use case - the ignition source can be set to power voltage and the seatbelt sensor can be connected to Digital input with priority - High and Operand "On change".
+
1. Digital Input: FMC920 device only has 1 Digital input which is mostly used to connect ignition cable, In this use case - Ignition source can be set to power voltage and seatbelt sensor can be connected to Digital input with priority - High and Operand "On change". If the voltage from seat belt sensor is negative, please use relay to convert to positive voltage. Please find screenshot below for reference.
  
−
2. Analog Input: The seat belt sensor can be connected to Analog Input 1 with priority - high and low-level values (depending on the voltage from the seatbelt, let's say 12 VDC) - 10 VDC and High level - 13 VDC. The idea is to make the voltage fall between low-level and high-level values and generate an event when the voltage enters that range.  
+
2. Analog Input: Seat belt sensor can be connected to Analog input 1 with priority - high and low level value (depending on the voltage from seatbelt, lets say 12 VDC) - 10 VDC and High level - 13 VDC. Idea is to make the voltage fall between low level and high level value and generate event when the voltage enters that range. If the voltage from seat belt sensor is negative, please use relay to convert to positive voltage. Please find screenshot below for reference.
  
 +
IO Priority guide: https://wiki.teltonika-gps.com/view/FMC920_I/O_settings#High_Priority
  
 +
IO Operand: https://wiki.teltonika-gps.com/view/FMC920_I/O_settings#Operands
  
−
IO settings guide:  [[FMC920 I/O settings]]
+
It is recommend to use FMX130 as the device has Ground sense option which will be easier to connect and also DIN1 can be used for Ignition which will be more accurate
−
 
 
−
It is recommended to use FMX130 as the device has a Ground sense option which will be easier to connect and DIN1 can be used for accurate Ignition detection.
 
 
|}
 
|}
  
Line 99: Line 99:
 
|<strong>Why does the TAT100 device appear offline on my server? </strong>
 
|<strong>Why does the TAT100 device appear offline on my server? </strong>
 
|-
 
|-
−
| The TAT100 always works in Deep-sleep mode, and the open link Timeout is 30sec maximum, so the device does not stay connected to the server - this is done to preserve the battery life and allow the device to work longer.
+
| The TAT works always in Deep-sleep mode, and the open link Timeout is 30sec maximum, so the device does not stay connected to the server. This is done to preserve the battery and allow the device to work longer.
 
|}
 
|}
  
Line 105: Line 105:
 
|<strong>Can I send an SMS or command to the TAT100? </strong>
 
|<strong>Can I send an SMS or command to the TAT100? </strong>
 
|-
 
|-
−
| Yes, you can send a command to the TAT100 and it will execute this command once it wakes up.
+
| Yes, you can send a command to the TAT100 and it will receive this command once it wakes up.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>When does TAT100 connect to FOTA WEB? </strong>
 +
|-
 +
| TAT100 devices do not connect to FOTA Web periodically. It will automatically connect to FOTA Web only on initial startup (when the switch is flipped from OFF to ON position). Connection to FOTA Web should be initiated via the 'web_connect' SMS/GPRS command. This is to preserve battery power.
 
|}
 
|}
  
Line 131: Line 137:
 
|<strong>When opening the configurator, a .NET error is shown. I tried installing .NET 7.0, but the error remained. How can this be solved?  </strong>
 
|<strong>When opening the configurator, a .NET error is shown. I tried installing .NET 7.0, but the error remained. How can this be solved?  </strong>
 
|-
 
|-
−
| New Configurators use the newer .NET version - please make sure the correct version is installed and remove other (unused) .NET versions – more information can be found here:  [[.NET Runtime for Desktop installation]]
+
| New Configurators use the newer .NET version. Please make sure the correct version is installed. Please remove other (unused) .NET versions – more inforamtion can be found here:  Note #1: The Ways to determine the required version section is especially important here. It will help you decide which version you should choose. Note #2: x86 is recommended even with Microsoft Windows 64-bit Operating System.
−
Note #1: The Ways to determine the required version section is especially important here. It will help you decide which version you should choose.  
 
−
 
 
−
Note #2: x86 is recommended even with Microsoft Windows 64-bit Operating System.
 
 
|}
 
|}
  
Line 141: Line 144:
 
|-
 
|-
 
| FOTA Web is simply a device management platform that is used to assign files to the device remotely, such as firmware, configuration files, etc.
 
| FOTA Web is simply a device management platform that is used to assign files to the device remotely, such as firmware, configuration files, etc.
−
FOTA Web is '''not''' a tracking platform and does not report the device's real-time location.
+
FOTA Web does not report the device's real-time location.
−
 
 
−
 
 
−
You can find more information about the FOTA Web tool here: [[FOTA WEB]]
 
 
|}
 
|}
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>How to use the device transfer feature in FOTA Web? </strong>
+
|<strong>How to use the device transfer feature in FOTAWEB? </strong>
 
|-
 
|-
−
| Device transfer is a feature in FOTA Web that allows clients to directly move devices amongst their accounts without the need to involve Teltonika.
+
| Device transfer is a feature in FOTAWEB that allows clients to directly move devices amongst their accounts without the need to involve Teltonika.
−
More information about this feature can be found here: [https://wiki.teltonika-gps.com/view/FOTA_WEB_Devices#Device_transfer Device transfer]
+
More information about this feature can be found here: https://wiki.teltonika-gps.com/view/FOTA_WEB_Devices#Device_transfer
 
|}
 
|}
  
Line 157: Line 157:
 
|<strong>How do I update configurations remotely via Teltonika FOTA Web? </strong>
 
|<strong>How do I update configurations remotely via Teltonika FOTA Web? </strong>
 
|-
 
|-
−
| Kindly use the FOTA Web to remotely update configurations to units as explained here: [[FOTA WEB|FOTA Web]]
+
| Kindly use the FOTA Web to remotely update configurations to units as explained here: https://wiki.teltonika-gps.com/view/FOTA_WEB
  
 
Steps are:  
 
Steps are:  
  
−
1. Upload the configuration file in FOTA Web under the files tab.  
+
1. Upload the configuration file in FOTA WEB under the files tab.  
  
 
2. Head over to the devices tab then select the devices to receive the configuration.  
 
2. Head over to the devices tab then select the devices to receive the configuration.  
Line 167: Line 167:
 
3. Click on Create Task and choose Update Configuration on the drop-down then below it, choose the uploaded file, then click on Create Task.  
 
3. Click on Create Task and choose Update Configuration on the drop-down then below it, choose the uploaded file, then click on Create Task.  
  
−
The task will be executed the next time the device connects to FOTA Web or you can force it to connect immediately by sending a command '''''web_connect''''', or by forcing a hard restart of the unit by unplugging the power and the internal battery then plugging it back on - then the task will be executed immediately.
+
The task will be executed the next time the device connects to FOTA WEB or you can force it to connect immediately by sending a command "  web_connect" with two spaces before the command and no quotes, or hard restart the unit by unplugging the power and the internal battery then plugging it back on then the task will be executed immediately.
 
|}
 
|}
  
Line 175: Line 175:
 
|<strong>What are the SIM card requirements for use with Teltonika Telematics devices? </strong>
 
|<strong>What are the SIM card requirements for use with Teltonika Telematics devices? </strong>
 
|-
 
|-
−
| Different Teltonika Telematics devices support Mini SIM, Micro SIM, and Nano SIM sized SIM cards. To know the exact SIM card supported by Your device, please check the General Description Wiki page for Your device.
+
| It is recommended to use any SIM card of choice, provided it can establish a GPRS connection to a remote server(bare minimum, should be able to connect to the internet
−
 
 
−
 
 
−
As for eSIMs, there are a couple of requirements for it to work with our devices - they can be found here: [[Requirements for eSIM]]
 
 
|}
 
|}
  
Line 184: Line 181:
 
|<strong>How to connect the fuel gauge sensor to the Analog input of the FMx and calibrate for accurate results? </strong>
 
|<strong>How to connect the fuel gauge sensor to the Analog input of the FMx and calibrate for accurate results? </strong>
 
|-
 
|-
−
| We can measure the fuel level using analog input by matching the voltage coming from the fuel level sensor already mounted in the car, with the fuel level in the tank.
+
| Connect the analog input of the FMx to the vehicle fuel gauge data wire.
−
More information on how the AIN has to be connected and calibrated can be found here: [[Analog Fuel Sensor]]
+
 
 +
Connect the device to the PC and open the configurator under IO Locate the Analog input connected ie Analog input 1 or Analog input 2.
 +
 
 +
Turn on the ignition till the fuel gauge can show the fuel level on the dash.
 +
 
 +
Empty the tank.
 +
 
 +
Create a table of voltage against liters.
 +
 
 +
Add liters in batches of for instance 2 liters if the capacity is small like 40 liters or 5 litres if the capacity is above 80, while checking the voltage in the configurator.
 +
 
 +
After adding, give it a little time for the fuel gauge to read the voltage before adding a new batch.
 +
 
 +
Do this until the fuel tank is full.
 +
 
 +
Implement the table on the tracking platform using the AVL ID of the analog input connected.
 
|}
 
|}
  
Line 191: Line 203:
 
|<strong>Where can we find the connection schemes for CAN-CONTROL adapter? </strong>
 
|<strong>Where can we find the connection schemes for CAN-CONTROL adapter? </strong>
 
|-
 
|-
−
| Please create a Helpdesk ticket for our support team and specify the vehicle that the connection scheme is needed for.
+
| Please use the below drive to download the needed connection scheme.
−
The whole supported vehicle list for CAN-CONTROL adapter can be found here: [[CAN adapter supported vehicles]]
+
 
 +
Link: https://drive.teltonika.lt/d/31c32f08610044b699b3/
 +
 
 +
Password: wzh1XNp0
 
|}
 
|}
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>Does all RFID cards with 125 or 128kHz frequency work with FMC150 ? What about a 13.56 MHz NFC or RFID device? </strong>
+
|<strong>Does all RFIDs with 125 or 128kHz frequency will support FMC150 ? What about a 13.56 MHz NFC or RFID device? </strong>
 
|-
 
|-
−
|Like other devices with a 1-Wire interface, FMC150 also supports a 1-wire protocol (DS1990A) RFID reader.
+
|Like other devices with a 1-Wire interface, FMC 150 also supports a 1-wire protocol (DS1990A) RFID reader.
 
If the reader reads cards with 125 or 128 kHz and transmits this data through 1 wire protocol (DS1990A), we can integrate it into FMC150.
 
If the reader reads cards with 125 or 128 kHz and transmits this data through 1 wire protocol (DS1990A), we can integrate it into FMC150.
 
|}
 
|}
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>How many batteries does TAT1XY use? </strong>
+
|<strong>Can ADAS be used on a motorcycle? </strong>
 
|-
 
|-
−
| TAT1XY uses 1 battery, which consists of 2 (7.2V variant) or 3 (10.8V variant) cells. Difference between them - according to our testing the 3 cell battery can send 45% more records when compared to 2 cell battery.
+
| Teltonika ADAS is not intended to be used on motorcycles.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>How many batteries does TAT use? </strong>
 +
|-
 +
| We are using a set of 2 batteries, and the nominal voltage is 7.2V. Additionally, there is a different TAT hardware version that works with 3 cell batteries, and the nominal voltage is 10.8V
 
|}
 
|}
  
Line 221: Line 242:
 
| Teltonika data sending protocol Codec 8 and Codec 8Extended description with examples:
 
| Teltonika data sending protocol Codec 8 and Codec 8Extended description with examples:
  
−
[[Codec|AVL data sending codecs]]
+
https://wiki.teltonika-gps.com/view/Codec#Codec_8
  
 
TCP/UDP listener and AVL parser with source code that could be used as a template for implementation of Teltonika protocols. The whole pack can be downloaded from here:
 
TCP/UDP listener and AVL parser with source code that could be used as a template for implementation of Teltonika protocols. The whole pack can be downloaded from here:
  
−
[https://wiki.teltonika-gps.com/view/Universal_Device_Test_Guide#Protocols_implementation Listener and AVL parser]
+
https://wiki.teltonika-gps.com/view/Universal_Device_Test_Guide#Protocols_implementation
 
|}
 
|}
  
Line 235: Line 256:
 
When advanced beacon mode is selected, beacon data capturing can be configured manually and to distinguish simple and advanced functionalities a different ID is used - AVL ID 548.
 
When advanced beacon mode is selected, beacon data capturing can be configured manually and to distinguish simple and advanced functionalities a different ID is used - AVL ID 548.
  
−
For advanced beacon configuration documentation, you can find it here: [[Advanced Beacon Capturing Configuration]]
+
For advanced beacon configuration documentation, you can find it here: https://wiki.teltonika-gps.com/view/Advanced_Beacon_Capturing_Configuration
 
|}
 
|}
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>I have implemented Codec8 Extended protocol. Communication is working correctly, IMEI and AVL packets are working fine, but the unit sends 0xFF instead of AVL packets sometimes. Is there any use of this packet and is it necessary to send some data as a response back? </strong>
+
|<strong>I have implemented Codec8 Extended protocol. Communication is working correctly, IMEI and AVL packets are working fine.
 +
But the unit sends 0xFF instead of AVL packets sometimes. It's not in the documentation.
 +
 
 +
Is there any sense of this information and is it necessary to send some data as a response back? </strong>
 
|-
 
|-
 
| It seems that You have enabled the Network Ping Timeout feature.
 
| It seems that You have enabled the Network Ping Timeout feature.
Line 251: Line 275:
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>I have successfully paired the Teltonika Eye sensor to the fleet management device and I can see the data on the I/O tab but the data is not sent to my platform, what could be the issue? </strong>
+
|<strong>I have successfully paired the Teltonika Eye sensor to the FMB130 and I can see the data on the I/O tab but the data is not sent to my platform, what could be the issue? </strong>
 
|-
 
|-
 
| For the data to be sent to the platform, the I/O needs to have a priority of ‘Low’, ‘High’, or ‘Panic’ so that the data can be sent with periodical data to the platform.
 
| For the data to be sent to the platform, the I/O needs to have a priority of ‘Low’, ‘High’, or ‘Panic’ so that the data can be sent with periodical data to the platform.
  
−
I/O Settings wiki page - [[FMB125 I/O settings]]
+
I/O Settings wiki page - https://wiki.teltonika-gps.com/view/FMB125_I/O_settings
 
|}
 
|}
 +
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
Line 263: Line 288:
 
|Please check which ignition source have you chosen and configure the device according to Your use case.  
 
|Please check which ignition source have you chosen and configure the device according to Your use case.  
  
−
More information about the Ignition sources can be found here: [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source Ignition source]
+
More information about the Ignition sources can be found here: https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source
 
|}
 
|}
  
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
−
|<strong>When testing the OBD device alarm of the vehicle is triggered when it is parked. What could cause this? </strong>
+
|<strong>I have successfully paired the Teltonika Eye sensor to the FMB130 and I can see the data on the I/O tab but the data is not sent to my platform, what could be the issue? </strong>
 
|-
 
|-
−
| This usually occurs when the device tries making OBD requests while the vehicle has no ignition and is locked. This can happen due to improper configuration, so make sure that the OBD device properly detects the ignition of the vehicle, when the ignition is actually ON.
+
| For the data to be sent to the platform, the I/O needs to have a priority of ‘Low’, ‘High’, or ‘Panic’ so that the data can be sent with periodical data to the platform.
−
More information about the Ignition sources can be found here: [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Ignition_Source Ignition source]
 
−
|}
 
−
 
 
−
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
−
|<strong>Why does my device keep sending the same coordinates even if the vehicle is moving? </strong>
 
−
|-
 
−
|This is usually caused by the Static Navigation feature being misconfigured in the [[FMB130 System settings|System settings]].
 
−
The static navigation feature allows us to filter out false GNSS position changes when the vehicle is stationary and show only the true location of the vehicle.
 
−
 
 
−
[[File:Static navigation off.png|frameless|339x339px]][[File:Static navigation on.png|frameless|344x344px]]
 
−
 
 
−
 
 
−
 
 
−
The filtering can be disabled by configured movement and/or ignition source - if they are configured incorrectly, the device will not only incorrectly detect vehicle movement state or ignition, but also will not disable the filtering, causing the records to be sent with the same coordinates.
 
−
 
 
−
To make sure that the Ignition is detected correctly, You can use the configurator Status I/O window or check the AVL ID 239 on Your server.
 
−
 
 
−
For movement detection, it can also be checked on the configurator Status I/O window or by checking AVL ID 240 on Your server.
 
  
 +
I/O Settings wiki page - https://wiki.teltonika-gps.com/view/FMB125_I/O_settings
 
|}
 
|}

Revision as of 15:01, 12 January 2024

Firmware

Software

Hardware

Protocols

Configuration


Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Starting_with_Teltonika_Telematics&oldid=94961"