Difference between revisions of "FTC881 First Start"

From Wiki Knowledge Base | Teltonika GPS
(10 intermediate revisions by one other user not shown)
Line 5: Line 5:
 
__TOC__
 
__TOC__
  
−
=='''KNOW YOUR DEVICE'''==
 
−
[[File:FTC881 KNOW YOUR DEVICE.PNG|centre|1000 px]]
 
  
−
=='''HOW TO INSERT NANO-SIM CARD'''==
+
=='''HOW TO INSERT MICRO-SIM CARD'''==
  
 
{{{with_battery|
 
{{{with_battery|
−
# Device is delivered partly closed. Gently remove {{{model|FTC881}}} '''cover'''.
+
# Gently remove {{{model|FTC881}}} '''cover''' using '''plastic pry tool''' from one side.
−
# Insert '''{{{sim_type|Nano-}}}SIM''' card as shown. Make sure that {{{sim_type|Nano-}}}SIM card '''cut-off corner''' is pointing towards SIM slot.
+
# Gently remove {{{model|FTC881}}} '''cover''' using '''plastic pry tool''' from another side.
−
# Battery is already connected, so after configuring device fully close casing.
+
# Insert '''{{{sim_type|Nano-}}}SIM''' card as shown. Make sure that {{{sim_type|Nano-}}}SIM card '''cut-off corner''' is pointing forward to slot.
−
# Device is ready to be mounted.}}}
+
# Connect the battery as shown on device. Make sure that "+" is pointing to SIM-slot, "-" is pointing to GNSS antenna.
 +
# Attach device '''cover''' back. Device is ready to be connected.}}}
  
−
{{{SIM1|[[Image:FTX8_device_setup.png|850px]]}}}
+
{{{SIM1|[[Image:FTC881_battery_1.png|850px]]}}}
 +
{{{SIM2|[[Image:FTC881_battery_2.png|550px]]}}}
  
  
Line 23: Line 23:
 
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 
|}
 
|}
−
 
−
=='''HOW TO REMOVE COVER'''==
 
−
 
−
{|
 
−
|-
 
−
| [[File:Alert.png|left|link=]] || <b> Device casing is designed to be water-proof and match requirements for IP69K. Please note that once the cover is fully clipped it will require additional plastic pry tools to be opened! Please make sure to review short walkthrough video for more details:</b>
 
−
|}
 
−
<youtube>https://www.youtube.com/watch?v=fgOQtk6X0nw</youtube>
 
  
 
=='''PC CONNECTION (WINDOWS)'''==
 
=='''PC CONNECTION (WINDOWS)'''==
Line 48: Line 40:
 
At first FTC881 device will have default factory settings set. These settings should be changed according to the user's needs. Main
 
At first FTC881 device will have default factory settings set. These settings should be changed according to the user's needs. Main
 
configuration can be performed via [https://wiki.teltonika-gps.com/view/Telematics_Configuration_Tool_(TCT) Teltonika Configurator tool (TCT)].
 
configuration can be performed via [https://wiki.teltonika-gps.com/view/Telematics_Configuration_Tool_(TCT) Teltonika Configurator tool (TCT)].
−
 
−
=='''PINOUT'''==
 
−
 
−
{| class="wikitable"
 
−
|+
 
−
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| PIN NUMBER
 
−
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| PIN NAME
 
−
! style="width:20 px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"|
 
−
DESCRIPTION
 
−
| rowspan="13" style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[Image:FTC_881_Pinout_2.png|300px|center]]
 
−
|-
 
−
|-
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8;lenght: 50 px; text-align: left; vertical-align: center; background: white;" | 1
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#FF0000>'''VCC'''</span>
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | (Red) Power supply (+10-90 V DC) (+).
 
−
|-
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 2
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#000000>'''GND''' </span>
 
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | (Black) Ground (-).
 
−
|-
 
−
|}
 
  
 
=='''MOUNTING RECOMMENDATIONS'''==
 
=='''MOUNTING RECOMMENDATIONS'''==

Revision as of 10:03, 23 April 2024

Main Page > Fast & Easy Trackers > FTC881 > FTC881 First Start

Small and smart waterproof tracker

FTC881-QJABO-datasheet-2023-09-25.1.png



HOW TO INSERT MICRO-SIM CARD

  1. Gently remove FTC881 cover using plastic pry tool from one side.
  2. Gently remove FTC881 cover using plastic pry tool from another side.
  3. Insert Nano-SIM card as shown. Make sure that Nano-SIM card cut-off corner is pointing forward to slot.
  4. Connect the battery as shown on device. Make sure that "+" is pointing to SIM-slot, "-" is pointing to GNSS antenna.
  5. Attach device cover back. Device is ready to be connected.

FTC881 battery 1.png FTC881 battery 2.png


Alert.png
 Nano-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Nano-SIM card might be damaged or device will not detect it.

PC CONNECTION (WINDOWS)

  1. Power- up FTC881 with DC voltage (10-90V) power supply using power wires. LEDs should start blinking, see “LED behaviour description”.
  2. Connect device to computer using USB Type-C cable and install USB driver, see "HOW TO INSTALL USB DRIVERS (WINDOWS)".

HOW TO INSTALL USB DRIVERS (WINDOWS)

  1. Please download COM port drivers from here.
  2. Extract and run TeltonikaCOMDriver.exe.
  3. Click Next in driver installation window.
  4. In the following window click Install button.
  5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

CONFIGURATION (WINDOWS)

At first FTC881 device will have default factory settings set. These settings should be changed according to the user's needs. Main configuration can be performed via Teltonika Configurator tool (TCT).

MOUNTING RECOMMENDATIONS

DEVICE FASTENING

  • Locate the battery in your vehicle. If present remove the battery cover to access the battery.
  • There is a double sided tape on the back of the device, use it to attach the device on the battery, so that the GNSS antenna and LEDs indicators are facing up.

CONNECTING POWER SOURCE

  • Device power wire is designed to be directly connected to the positive terminal fastener of the vehicle battery.

CONNECTING GROUND WIRE

  • Device ground wire is designed to be directly connected to the negative terminal fastener of the vehicle battery.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FTC881_First_Start&oldid=97611"