Difference between revisions of "FMB630 K-Line Data"

From Wiki Knowledge Base | Teltonika GPS
 
Line 1: Line 1:
 
{{Template:FMB630_K-Line_Data}}
 
{{Template:FMB630_K-Line_Data}}
[[Category:FMB630 Advanced Configuration]]
+
[[Category:FMB630 Configuration]]

Latest revision as of 07:44, 17 October 2019

Main Page > EOL Products > FMB630 > FMB630 Configuration > FMB630 K-Line Data

K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet.

To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.


Kline tab.png

K-Line front panel supported with Firmware version 00.02.xx

External links

https://wiki.teltonika-gps.com/view/FM63_firmware_errata
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution