Template:FMB002 First start card: Difference between revisions

VisualWikitext

Latest revision as of 18:07, 30 October 2020

Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

How to insert Nano-SIM card and connect battery

Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
Insert Nano-SIM card as shown with PIN request disabled' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
Connect the battery as shown in the figure.
After configuration, see “PC Connection (Windows)”, attach device cover back.

The device is ready to be mounted.

Nano-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Nano-SIM card might be damaged or device will not detect it.

@@ Line 10: / Line 10: @@
-=='''How to insert Micro-SIM card and connect battery'''==
+=='''How to insert Nano-SIM card and connect battery'''==
-#  Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
+# Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
-# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
+# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
-# Attach the SIM card tray back.
+# Connect the battery as shown in the figure.
-# Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
-# Connect the battery as shown to device.
 # After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
-Device is ready to be mounted.
+The device is ready to be mounted.
@@ Line 28: / Line 27: @@
 {|
 |-
-| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
-|}
-{|
-|-
-| [[File:Alert.png|left|link=]] || <b>Do not insert the SIM card tray into the {{{model|FMB}}} device without a {{{sim_type|Micro-}}}SIM card in it. Doing so could potentially damage the SIM card tray, which can make it impossible to insert the {{{sim_type|Micro-}}}SIM card into the device.</b>
 |}