Difference between revisions of "Template:FMB CAN line connection"

From Wiki Knowledge Base | Teltonika GPS
m
 
(5 intermediate revisions by the same user not shown)
Line 8: Line 8:
 
====Tools needed for installation====
 
====Tools needed for installation====
 
* Wiring scheme by CAN adapter and ''"Supported vehicle list"'':
 
* Wiring scheme by CAN adapter and ''"Supported vehicle list"'':
−
** [https://wiki.teltonika-gps.com/wikibase/images/d/d8/LVCAN200_list_2020_03_03Teltonika.pdf LV-CAN200]
+
** [https://wiki.teltonika-gps.com/wikibase/images/a/a2/LVCAN200_list_2021_05_06_en.pdf LV-CAN200]
−
** [https://wiki.teltonika-gps.com/wikibase/images/5/5e/ALL-CAN300_list_2020_03_03Teltonika.pdf ALL-CAN300]
+
** [https://wiki.teltonika-gps.com/wikibase/images/b/b3/ALLCAN300_list_2021_05_06_en.pdf ALL-CAN300]
 
:'''Note:''' to get current wiring scheme or if on the ''"Supported vehicle list"'' you do not find your vehicle, please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
 
:'''Note:''' to get current wiring scheme or if on the ''"Supported vehicle list"'' you do not find your vehicle, please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
 
* {{{model|FMB1YX}}} device
 
* {{{model|FMB1YX}}} device
Line 23: Line 23:
 
# Connect {{{model|FMB1YX}}} '''positive''' and '''ground''' wires to the vehicle power supply lines.<p><table><td>[[File:Alert.png|50px|left|link=]]</td><td><b>Do not swap power supply lines.<br />Make sure that voltage does not exceed 30V.</b></td></table></p>
 
# Connect {{{model|FMB1YX}}} '''positive''' and '''ground''' wires to the vehicle power supply lines.<p><table><td>[[File:Alert.png|50px|left|link=]]</td><td><b>Do not swap power supply lines.<br />Make sure that voltage does not exceed 30V.</b></td></table></p>
 
# Switch vehicle '''ignition to ACC''' position. {{{model|FMB1YX}}} '''CAN status LED''' on the side should start '''blinking'''.
 
# Switch vehicle '''ignition to ACC''' position. {{{model|FMB1YX}}} '''CAN status LED''' on the side should start '''blinking'''.
−
# Configure {{{model|FMB1YX}}} to read CAN bus data or control vehicle by setting its '''program number''' - [[{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration|CAN Adapter configuration]]
+
# Configure {{{model|FMB1YX}}} to read CAN bus data or control vehicle by setting its '''program number''' - [[{{{FMB140|{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration}}}|CAN Adapter configuration]]
 
<br />
 
<br />
 
[[File:Alert.png|50px|left|link=]]<b>When {{{model|FMB1YX}}} device turns on sleep mode, CAN chip is turned off till device turns off sleep mode.</b>
 
[[File:Alert.png|50px|left|link=]]<b>When {{{model|FMB1YX}}} device turns on sleep mode, CAN chip is turned off till device turns off sleep mode.</b>
Line 109: Line 109:
 
Depending on CAN Adapter I/O parameters and ignition status, {{{model|FMB1YX}}} can send locked (last known) CAN Adapter I/O and active (real time) parameters values or reset values to 0. When ignition is off, CAN Adapter I/O parameters values sent to server are:
 
Depending on CAN Adapter I/O parameters and ignition status, {{{model|FMB1YX}}} can send locked (last known) CAN Adapter I/O and active (real time) parameters values or reset values to 0. When ignition is off, CAN Adapter I/O parameters values sent to server are:
  
−
{| class="wikitable" style="width:40%;"
+
<table class="nd-othertables_2" style="width:40%;">
−
|+
+
<tr>
−
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | CAN Adapter I/O element
+
        <th style="width: 25%; text-align: left;">CAN Adapter I/O element</th>
−
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"  | Status
+
        <th style="width: 15%; text-align: left;">Status</th>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Vehicle Speed
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Vehicle Speed</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Accelerator pedal position
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Accelerator pedal position</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Total fuel used
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel level (liters)
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Total fuel used</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | Engine RPM
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Fuel level (liters)</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Total mileage
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Engine RPM</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel level (%)
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
    </tr>
−
|-
+
  <tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | Program number
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Total mileage</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Module ID
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Fuel level (%)</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Work Time
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Program number</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Work Time (counted)
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
    </tr>
−
|-
+
  <tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Total Mileage (counted)
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Module ID</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel Consumed (counted)
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Engine Work Time</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Fuel Rate
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | reset
+
  <tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Engine Work Time (counted)</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Program number
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | AdBlue Level (%)
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Total Mileage (counted)</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | AdBlue Level (liters)
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | lock
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Fuel Consumed (counted)</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Load
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | reset
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Fuel Rate</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Engine Temperature
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
    </tr>
−
|-
+
  <tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 1 Load
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Program number</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 2 Load
+
  <tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">AdBlue Level (%)</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 3 Load
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">AdBlue Level (liters)</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 4 Load
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Axle 5 Load
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Engine Load</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | lock
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Control State Flags
+
  <tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Engine Temperature</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Agricultural Machinery Flags
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
  <tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Axle 1 Load</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Harvesting Time
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | lock
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Area of Harvest
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Axle 2 Load</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Mowing Efficiency
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Axle 3 Load</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Grain Mown Volume
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Axle 4 Load</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Grain Moisture
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Harvesting Drum RPM
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Axle 5 Load</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Gap Under Harvesting Drum
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Control State Flags</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Security State Flags
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
  <tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Agricultural Machinery Flags</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph Total Vehicle Distance
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lock
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Trip Distance
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Harvesting Time</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph Vehicle Speed
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | reset
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Area of Harvest</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Tachograph Driver Card Presence
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
  <tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Mowing Efficiency</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 States
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 States
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Grain Mown Volume</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Continuous Driving Time
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Grain Moisture</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Continuous Driving Time
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Harvesting Drum RPM</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Cumulative Break Time
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Cumulative Break Time
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Gap Under Harvesting Drum</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
|-
+
    </tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Selected Activity Duration
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Security State Flags</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">active</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver2 Selected Activity Duration
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
<tr>
−
|-
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Tachograph Total Vehicle Distance</td>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Driver1 Cumulative Driving Time
+
        <td style="text-align: left; vertical-align: center;">lock</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | active
+
    </tr>
−
|-
+
<tr>
−
! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | Driver2 Cumulative Driving Time
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Trip Distance</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;"  | active
+
        <td style="text-align: left; vertical-align: center;">reset</td>
−
|-
+
    </tr>
−
|}
+
<tr>
−
<br />
+
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Tachograph Vehicle Speed</td>
 +
        <td style="text-align: left; vertical-align: center;">reset</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Tachograph Driver Card Presence</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver1 States</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver2 States</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver1 Continuous Driving Time</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver2 Continuous Driving Time</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver1 Cumulative Break Time</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver2 Cumulative Break Time</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver1 Selected Activity Duration</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver2 Selected Activity Duration</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver1 Cumulative Driving Time</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
<tr>
 +
        <th style="border-bottom: 1px solid #E8E8E8; text-align: left; vertical-align: center; color: black;">Driver2 Cumulative Driving Time</td>
 +
        <td style="text-align: left; vertical-align: center;">active</td>
 +
    </tr>
 +
</table>
 +
 
 
====SMS Configuration====
 
====SMS Configuration====
 
----
 
----
Line 277: Line 325:
 
For more SMS commands please see [[FMB_SMS/GPRS_Commands|SMS/GPRS command list]]
 
For more SMS commands please see [[FMB_SMS/GPRS_Commands|SMS/GPRS command list]]
  
−
{| class="wikitable" style="width:80%;"
+
<table class="nd-othertables_2" style="width:80%;">
−
|+
+
<tr>
−
! style="width: 25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | COMMAND
+
        <th style="width: 25%; text-align: left;">COMMAND</th>
−
! style="width: 65%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
+
        <th style="width: 65%; text-align: left;">DESCRIPTION</th>
−
! style="width: 10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | RESPONSE
+
        <th style="width: 10%; text-align: left;">RESPONSE</th>
−
|-
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcansetprog #
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Set program number to CAN Adapter that is connected to {{{model|FMB1YX}}}.<br/># - three digit number that identity vehicle.
+
        <td style="text-align: left; vertical-align: center;">lvcansetprog #</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
        <td style="text-align: left; vertical-align: center;">Set program number to CAN Adapter that is connected to {{{model|FMB1YX}}}.<br/># - three digit number that identity vehicle.</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;>Yes</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcansimpletacho #
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Add or remove simpletacho start byte.<br/> # - 0 or 1 (0 – don’t add start byte, 1 – add start byte).
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | No
+
        <td style="text-align: left; vertical-align: center;">lvcansimpletacho #</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">Add or remove simpletacho start byte.<br/> # - 0 or 1 (0 – don’t add start byte, 1 – add start byte).</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcangetprog  
+
        <td style="text-align: left; vertical-align: center;">No</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Get program number from CAN Adapter that is connected to {{{model|FMB1YX}}}.
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
<tr>
−
|-
+
        <td style="text-align: left; vertical-align: center;">lvcangetprog </td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[FMB lvcangetinfo|lvcangetinfo]]
+
        <td style="text-align: left; vertical-align: center;">Get program number from CAN Adapter that is connected to {{{model|FMB1YX}}}.</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Get information about connected CAN Adapter
+
        <td style="text-align: left; vertical-align: center;">Yes</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
    </tr>
−
|-
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[FMB_lvcanclear|lvcanclear #]]
+
        <td style="text-align: left; vertical-align: center;">[[FMB lvcangetinfo|lvcangetinfo]]</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.<br/> # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).
+
        <td style="text-align: left; vertical-align: center;">Get information about connected CAN Adapter</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
        <td style="text-align: left; vertical-align: center;">Yes</td>
−
|-
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | allcanmode
+
<tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Turn on ALL-CAN300 mode.
+
        <td style="text-align: left; vertical-align: center; color: black">[[FMB_lvcanclear|lvcanclear #]]</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
        <td style="text-align: left; vertical-align: center;">Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.<br/> # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">Yes</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | lvcanmode
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Turn on LV-CAN200 mode.
+
{{{FMB140_SMS| <tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
        <td style="text-align: left; vertical-align: center;">allcanmode</td>
−
|-
+
        <td style="text-align: left; vertical-align: center;">Turn on ALL-CAN300 mode.</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[FMB_lvcanfaultcodes|lvcanfaultcodes]]
+
        <td style="text-align: left; vertical-align: center;">Yes</td>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Read DTC fault codes
+
    </tr>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yes
+
<tr>
−
|}
+
        <td style="text-align: left; vertical-align: center;">lvcanmode</td>
 +
        <td style="text-align: left; vertical-align: center;">Turn on LV-CAN200 mode.</td>
 +
        <td style="text-align: left; vertical-align: center;">Yes</td>
 +
    </tr>
 +
<tr>
 +
        <td style="text-align: left; vertical-align: center;">[[FMB_lvcanfaultcodes|lvcanfaultcodes]]</td>
 +
        <td style="text-align: left; vertical-align: center;">Read DTC fault codes</td>
 +
        <td style="text-align: left; vertical-align: center;">Yes</td>
 +
    </tr>}}}
 +
</table>

Latest revision as of 08:50, 8 June 2021

Easy steps to connect FMB1YX CAN line to the vehicle directly and following contactless CAN connectors:

Installing FMB1YX device

Tools needed for installation

Note: to get current wiring scheme or if on the "Supported vehicle list" you do not find your vehicle, please contact Teltonika Sales Representative and provide information about vehicle manufacturer, model and year.
  • FMB1YX device
  • Pliers
  • Quick splice connectors (If vehicle CAN bus wires are very thin CAN adapter wires should be connected directly)
  • Plastic pry tool
  • Zip ties

Installation steps

  1. Be ready with a vehicle connection scheme that you have received from a Teltonika Sales Representative.
  2. Check the scheme for the current vehicle connection. Look for connectors matching PINs numbers and colors (can be different) according to connection scheme.
  3. Connect FMB1YX CAN wires (CAN L, CAN H) as specified in connection scheme.

    Alert.png
    		Do not swap CAN L and CAN H lines.
    Not all FMB1YX wires may be used in vehicle.

  4. Connect FMB1YX positive and ground wires to the vehicle power supply lines.

    Alert.png
    		Do not swap power supply lines.
    Make sure that voltage does not exceed 30V.

  5. Switch vehicle ignition to ACC position. FMB1YX CAN status LED on the side should start blinking.
  6. Configure FMB1YX to read CAN bus data or control vehicle by setting its program number - CAN Adapter configuration


Alert.png

When FMB1YX device turns on sleep mode, CAN chip is turned off till device turns off sleep mode.



Installing FMB1YX + SIMPLE-CAN / MINI-CAN

Tools needed for installation

Note: if on the "Supported vehicle list" you do not find your vehicle, please contact Teltonika Sales Representative and provide information about vehicle manufacturer, model and year.
  • SIMPLE-CAN / MINI-CAN (Used for contactless connection. If two CAN lines need to be connected, two SIMPLE-CAN's / MINI-CAN's must be used.)
  • FMB1YX device
  • Pliers
  • Quick splice connectors (If vehicle CAN bus wires are very thin CAN adapter wires should be connected directly)
  • Plastic pry tool
  • Zip ties

Installation steps

  1. Connect the appropriate CAN bus pair of wires between FMB1YX and SIMPLE-CAN / MINI-CAN:
    If CAN1 line need to be connected as specified in connection scheme:
    1. Connect FMB1YX CAN1 L to CAN L of SIMPLE-CAN / MINI-CAN.
    2. Connect FMB1YX CAN1 H to CAN H of SIMPLE-CAN / MINI-CAN.
    If CAN2 line need to be connected as specified in the connection scheme:
    1. Connect FMB1YX CAN2 L to CAN L of SIMPLE-CAN / MINI-CAN.
    2. Connect FMB1YX CAN2 H to CAN H of SIMPLE-CAN / MINI-CAN.

      Alert.png
      		Do not swap CAN L and CAN H lines.
      Not all CAN adapter wires may be used in vehicle.

  2. Fasten SIMPLE-CAN / MINI-CAN between vehicle CAN bus wires according to the connection scheme. It doeasn't matter which wire is on which side.

    SIMPLE-CAN connection.gif

  3. Connect FMB1YX positive and ground wires to the vehicle power supply lines or near FMB1YX power wires.

    Alert.png
    		Do not swap power supply lines.
    Make sure that voltage does not exceed 30V.

  4. Switch vehicle ignition to ACC position.
  5. SIMPLE-CAN / MINI-CAN LED will shine continously so device awaits for calibration.
    • Press the switch shortly and wait for the LED to start blinking every one second.


    • Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking every 2 seconds.

    Alert.png
    		If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.


  6. Configure FMB1YX to read CAN bus data by setting its program number - CAN Adapter configuration

FMB1YX Configuration

FMB1YX program number selection

FMB1YX must be set to program number which depends on the vehicle model. Needed program number is always written on CAN Adapter mounting scheme. In order to be able to enter program number in adapter Software date of CAN adapter must be newer than connection scheme date. CAN adapter Software date can be checked:

Entering via SMS command

Required conditions:

  • FMB1YX properly connected to vehicle

FMB1YX program number can be set remotely, using SMS command. Send following SMS command to FMB1YX device:

  • If you have set SMS login and password: login pass lvcansetprog X
  • If SMS login and password are not set leave two spaces before command:   lvcansetprog X

Command example:   lvcansetprog 11434
SMS response: LVCAN ProgNum: 11434

If during SMS command FMB1YX was in following Sleep mode:

Entering via Teltonika Configurator

Required conditions:

  • FMB1YX properly connected to vehicle

FMB1YX program number can be set via Teltonika Configurator → (1) CAN Adapter → (2) Program Number. When program number is entered press Save to device.png (3) Save to device button that saves the entered program number into FMB1YX.

Can adapter conf.png

FMB1YX CAN Adapter parameters configuration

Teltonika Configurator

CAN Adapter configuration can be performed using Teltonika Configurator via Micro-USB cable or Blue-tooth connection when CAN Adapter is connected to the vehicle.
When FMB1YX is connected to the CAN Adapter, user can see all information that is received from the vehicle in Teltonika Configurator → Status → CAN Adapter tab or Teltonika Configurator → CAN Adapter section. In Status → CAN Adapter tab you can see information about CAN adapter and its readable parameters. In CAN Adapter section you can configure CAN Adapter and see incoming CAN bus data highlighted by green background color. Incoming data in both sections is automatically refreshed every 5 seconds. CAN bus data which should be readable from your vehicle is provided in "CAN Adapter supported vehicles list", which you can get from Teltonika Sales Representative.
The CAN Adapter I/O element can be configured like any other I/O element in Teltonika Configurator. All information about I/O element parameters description is in section I/O settings.

Fmb120 can conf example.png


When using offline configuration method user can select which CAN data (according to vehicle) will be sent directly to the server without connection to adapter.

Send data with 0, if ignition is off

Depending on CAN Adapter I/O parameters and ignition status, FMB1YX can send locked (last known) CAN Adapter I/O and active (real time) parameters values or reset values to 0. When ignition is off, CAN Adapter I/O parameters values sent to server are:

CAN Adapter I/O element Status
Vehicle Speed reset
Accelerator pedal position reset
Total fuel used lock
Fuel level (liters) lock
Engine RPM reset
Total mileage lock
Fuel level (%) lock
Program number lock
Module ID lock
Engine Work Time lock
Engine Work Time (counted) lock
Total Mileage (counted) lock
Fuel Consumed (counted) lock
Fuel Rate reset
Program number lock
AdBlue Level (%) lock
AdBlue Level (liters) lock
Engine Load reset
Engine Temperature active
Axle 1 Load lock
Axle 2 Load lock
Axle 3 Load lock
Axle 4 Load lock
Axle 5 Load lock
Control State Flags active
Agricultural Machinery Flags active
Harvesting Time lock
Area of Harvest reset
Mowing Efficiency active
Grain Mown Volume active
Grain Moisture active
Harvesting Drum RPM reset
Gap Under Harvesting Drum active
Security State Flags active
Tachograph Total Vehicle Distance lock
Trip Distance reset
Tachograph Vehicle Speed reset
Tachograph Driver Card Presence active
Driver1 States active
Driver2 States active
Driver1 Continuous Driving Time active
Driver2 Continuous Driving Time active
Driver1 Cumulative Break Time active
Driver2 Cumulative Break Time active
Driver1 Selected Activity Duration active
Driver2 Selected Activity Duration active
Driver1 Cumulative Driving Time active
Driver2 Cumulative Driving Time active

SMS Configuration

All FMB1YX IO elements can be configured remotely via SMS commands.

SMS/GPRS Commands

FMB1YX have several dedicated SMS/GPRS commands.
SMS command structure: 

<SMS login><space><SMS password><space><command><space><value>

SMS command lvcangetinfo example:

  • If you have set SMS login and password: login pass lvcangetinfo
  • If SMS login and password are not set leave two spaces before command: aalvcangetinfo


GPRS commands require Codec 12 protocol.

For more SMS commands please see SMS/GPRS command list

COMMAND DESCRIPTION RESPONSE
lvcansetprog # Set program number to CAN Adapter that is connected to FMB1YX.
# - three digit number that identity vehicle.		 Yes
lvcansimpletacho # Add or remove simpletacho start byte.
# - 0 or 1 (0 – don’t add start byte, 1 – add start byte).		 No
lvcangetprog Get program number from CAN Adapter that is connected to FMB1YX. Yes
lvcangetinfo Get information about connected CAN Adapter Yes
lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).		 Yes
allcanmode Turn on ALL-CAN300 mode. Yes
lvcanmode Turn on LV-CAN200 mode. Yes
lvcanfaultcodes Read DTC fault codes Yes
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB_CAN_line_connection&oldid=65603"