Difference between revisions of "Car Sharing Solution"
(58 intermediate revisions by 8 users not shown) | |||
Line 1: | Line 1: | ||
+ | ==Disclaimer== | ||
− | == | + | [[File:Alert.png|left|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks. |
− | Recently, we have seen the development of car-sharing services used by private individuals, companies and public institutions alike. These client groups, even though different, all seek comfortable and efficient use of vehicles. Reasons to use such services include fleet optimization, convenience, a sudden need for vehicles, business trips, trips abroad, etc. Also, such matters as car insurance, tire change, maintenance, or car wash are taken care of for the client. We're glad that you have decided to test our “Car Sharing” solution. | + | |
+ | If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security. | ||
+ | |||
+ | |||
+ | ==Introduction== | ||
+ | |||
+ | Recently, we have seen the development of car-sharing services used by private individuals, companies, and public institutions alike. These client groups, even though different, all seek comfortable and efficient use of vehicles. Reasons to use such services include fleet optimization, convenience, a sudden need for vehicles, business trips, trips abroad, etc. Also, such matters as car insurance, tire change, maintenance, or car wash are taken care of for the client. We're glad that you have decided to test our “Car Sharing” solution. | ||
+ | |||
+ | ==Solution description== | ||
+ | This solution allows vehicles to be used in car-sharing businesses by monitoring vehicles location and other useful parameters from the vehicle's CAN-BUS such as fuel level, speed, odometer, etc. The most important feature is the ability to lock and unlock the vehicle on demand without a key which is an essential feature for car-sharing businesses. To use this solution FMX1XY device paired with a CAN-CONTROL adapter is needed to allow data to be read from the vehicle and most importantly for door locking and unlocking to be accessible remotely via smartphone or server. | ||
+ | |||
+ | '''Note''': Active parameters are not sent when Ignition is Off when ODS, DS or UDS are configured because communication from device is turned off to conserve battery or lower consumption. To receive parameters - GPS sleep can be used, or no sleep should be used. GPS sleep only turns off GNSS part, everything else is left in operation. However, the consumption of this sleep mode is the highest. | ||
+ | |||
+ | Parameter list: [[FMB130 CAN adapters#Send%20data%20with%200.2C%20if%20ignition%20is%20off|https://wiki.teltonika-gps.com/view/FMB130_CAN_adapters#Send_data_with_0.2C_if_ignition_is_off]] | ||
==What you need for a solution?== | ==What you need for a solution?== | ||
− | *'''FMB130''' which | + | *'''FMx1YX''' device ([https://wiki.teltonika-gps.com/view/FMB130 '''FMB130''']is taken as example) which is used to connect to a CAN-CONTROL adapter. |
− | *The '''SIM card''' in order to get data to your server | + | {| class="mw-collapsible mw-collapsed wikitable" |
− | *'''CAN-CONTROL adapter'''. The adapter allows you to control car doors and it works with many of our products | + | | Other devices that work with this solution: |
− | *'''FOTA WEB''' to remotely send the configuration to the device.<br /> | + | |- |
+ | | [https://wiki.teltonika-gps.com/view/FMB110 '''FMB110'''], [https://wiki.teltonika-gps.com/view/FMB120 '''FMB120'''], [https://wiki.teltonika-gps.com/view/FMB122 '''FMB122'''], [https://wiki.teltonika-gps.com/view/FMB125 '''FMB125'''], [https://wiki.teltonika-gps.com/view/FMU125 '''FMU125'''], [https://wiki.teltonika-gps.com/view/FMC125 '''FMC125'''], [https://wiki.teltonika-gps.com/view/FMM125 '''FMM125'''], [https://wiki.teltonika-gps.com/view/FMU130 '''FMU130'''], [https://wiki.teltonika-gps.com/view/FMC130 '''FMC130'''], [https://wiki.teltonika-gps.com/view/FMM130 '''FMM130'''], [https://wiki.teltonika-gps.com/view/FMU126 '''FMU126'''] | ||
+ | |} | ||
+ | |||
+ | *The [https://wiki.teltonika-gps.com/view/FMB130_First_Start#How_to_insert_Micro-SIM_card '''SIM card'''] in order to get data to your server | ||
+ | *[https://wiki.teltonika-gps.com/view/CAN-CONTROL '''CAN-CONTROL adapter''']. The adapter allows you to control car doors and it works with many of our products | ||
+ | *[https://wiki.teltonika-gps.com/view/FOTA_WEB '''FOTA WEB'''] to remotely send the configuration to the device.<br /> | ||
==Installation== | ==Installation== | ||
It’s important to hide the tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow [https://wiki.teltonika-gps.com/view/FMB130_First_Start#Mounting_recommendations mounting recommendations] as well. | It’s important to hide the tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow [https://wiki.teltonika-gps.com/view/FMB130_First_Start#Mounting_recommendations mounting recommendations] as well. | ||
− | |||
Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts. | Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts. | ||
+ | The main accessory for the solution is '''CAN-CONTROL adapter''', please make sure that the right contacts are connected. Also, check more detailed information [https://wiki.teltonika-gps.com/view/FMB130_CAN_adapters#Installing_LV-CAN200.2FALL-CAN300.2FCAN-CONTROL here] and [https://wiki.teltonika-gps.com/wikibase/images/f/f1/CANCONTROL_list_2020_09_16_en.pdf supported vehicle list]. | ||
− | To have a working solution it’s important to properly wire the devices. | + | To have a working solution it’s important to properly wire the devices. In the picture below it's shown how to correctly wire the devices. |
− | |||
− | |||
+ | [[File:Can-control_connection_example_updated.png|alt=|middle|frameless|1100x357px]] | ||
During installation please follow recommendations in order to '''avoid damaging''' device and vehicle: | During installation please follow recommendations in order to '''avoid damaging''' device and vehicle: | ||
Line 36: | Line 55: | ||
====1.1. Read through [https://wiki.teltonika-gps.com/view/FMB130_First_Start First start guide]==== | ====1.1. Read through [https://wiki.teltonika-gps.com/view/FMB130_First_Start First start guide]==== | ||
====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB130_Sleep_modes Sleep modes].==== | ====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB130_Sleep_modes Sleep modes].==== | ||
− | + | ==='''2. Car sharing configuration:'''=== | |
− | ==='''2. | + | [[File:GPRS settings.png|alt=|left|thumb|258x258px]] |
− | |||
− | |||
− | [[File:GPRS settings.png | ||
Parameter ID – Parameter name GPRS settings: | Parameter ID – Parameter name GPRS settings: | ||
Line 50: | Line 66: | ||
*<span style="background-color:#b991d4;">2003</span> – APN password (if there are no APN password, empty field should be left) | *<span style="background-color:#b991d4;">2003</span> – APN password (if there are no APN password, empty field should be left) | ||
− | [[File:SERVER settings.png | + | [[File:SERVER settings.png|alt=|left|thumb|259x259px]] |
+ | |||
+ | |||
+ | |||
<br />Server settings: | <br />Server settings: | ||
Line 58: | Line 77: | ||
<br /> | <br /> | ||
− | |||
− | |||
− | + | ||
− | [[File: | + | |
+ | |||
+ | |||
+ | After successful GPRS/SERVER settings configuration, FMB130 device will '''synchronize time''' and '''update records''' to '''the configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[FMB130 Parameter list|SMS parameters]].<br /> | ||
+ | [[File:Online_deep_sleep_carsharing.PNG|alt=|left|thumb]] | ||
+ | |||
+ | |||
Sleep settings: | Sleep settings: | ||
− | + | <br /> | |
*<span style="background:#05CC6F">102</span> – Sleep settings(0 – Disable, 1 – Gps sleep, 2 – Deep sleep, 3 – Online Deep sleep, 4 – Ultra sleep) | *<span style="background:#05CC6F">102</span> – Sleep settings(0 – Disable, 1 – Gps sleep, 2 – Deep sleep, 3 – Online Deep sleep, 4 – Ultra sleep) | ||
− | + | '''Note''': This scenario will not work with [[FMB130 Sleep modes#Deep%20Sleep%20mode|Deep Sleep]] and [[FMB130 Sleep modes#Ultra%20Deep%20Sleep%20mode|Ultra Sleep]] modes, since they disable the device's GSM module to save power. | |
− | [[File:Can adapter settings carsharing solution.JPG | + | [[File:Can adapter settings carsharing solution.JPG|alt=|left|frame]] |
+ | <br /> | ||
+ | <br /> | ||
+ | <br /> | ||
<br /> | <br /> | ||
Can adapter settings: | Can adapter settings: | ||
Line 77: | Line 103: | ||
*<span style="background-color:#E18DE7;">45002</span> – CAN Adapter program number (This code is written in every connection diagram and it is specific for every vehicle model and make year) | *<span style="background-color:#E18DE7;">45002</span> – CAN Adapter program number (This code is written in every connection diagram and it is specific for every vehicle model and make year) | ||
+ | [[File:Can_adapter_door_status_settings.PNG|alt=|left|455x455px|thumb]] | ||
<br /> | <br /> | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | *<span style="background-color:#dee11d;">45170</span> – Door status, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic ) | ||
+ | |||
+ | [[File:Can_adapter_fuel_level_settings.PNG|alt=|left|453x453px|thumb]] | ||
<br /> | <br /> | ||
− | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | *<span style="background-color:#1de1d2;">45130</span> – Fuel level, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic ) | ||
+ | |||
+ | [[File:Can_adapter_settings_total_milage_counted.PNG|alt=|left|452x452px|thumb]] | ||
+ | <br /> | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | *<span style="background-color:#e1701d;">45220</span> – Total milage (Counted), Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic ) | ||
+ | |||
+ | [[File:Sec_state_flag_P2.PNG|alt=|left|453x453px|thumb]] | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | *<span style="background-color:#bce5d7;">45430</span> – Security State Flags, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic ) | ||
+ | <br /> | ||
+ | <br /> | ||
+ | <br /> | ||
+ | |||
+ | <br /> | ||
'''Quickstart:''' From default configuration to Car sharing solution in one SMS: | '''Quickstart:''' From default configuration to Car sharing solution in one SMS: | ||
− | " setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>: | + | " setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_user;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0;<span style="background:#05CC6F">102</span>:3;<span style="background:#E18DE7">45002</span>:ProgramNumber;<span style="background-color:#dee11d;">45170</span>:1;<span style="background-color:#1de1d2;">45130</span>:1;<span style="background-color:#e1701d;">45220</span>:1;<span style="background-color:#bce5d7;">45430</span>:1" |
+ | This SMS will set up your device to report the Car Sharing scenario to the server and the possibility for remote control of vehicle components. | ||
+ | |||
+ | '''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings. | ||
− | ==Parsing== | + | ==Parsing information== |
==='''1.Prerequisites:'''=== | ==='''1.Prerequisites:'''=== | ||
Line 99: | Line 179: | ||
| style="vertical-align: middle; text-align: center;" | 000000000000008F080100000177B0A5F838000000000000000000004400280D0000001F09EF00F0001504B301B40051005200590098000B42307443 | | style="vertical-align: middle; text-align: center;" | 000000000000008F080100000177B0A5F838000000000000000000004400280D0000001F09EF00F0001504B301B40051005200590098000B42307443 | ||
0F8244000011001812002D13FFE85400BE5500005A0000970000A800000AF10000601A53000000005703CB6B986400002E | 0F8244000011001812002D13FFE85400BE5500005A0000970000A800000AF10000601A53000000005703CB6B986400002E | ||
− | 97660000000069023B33856B000065B27B000000007D00000000BD000000000184<span style="background:# | + | 97660000000069023B33856B000065B27B000000007D00000000BD000000000184<span style="background:#0b9768">0080000030000005</span>0100005C92 |
|} | |} | ||
Line 342: | Line 422: | ||
|- | |- | ||
| style="vertical-align: middle; text-align: center;" |1'st IO ID | | style="vertical-align: middle; text-align: center;" |1'st IO ID | ||
− | | style="vertical-align: middle; text-align: center;" |<span style="background:# | + | | style="vertical-align: middle; text-align: center;" |<span style="background:#0b9768">84 (AVL ID: 132, Name: Security State Flags)</span> |
|- | |- | ||
| style="vertical-align: middle; text-align: center;" |1’st IO Value | | style="vertical-align: middle; text-align: center;" |1’st IO Value | ||
− | | style="vertical-align: middle; text-align: center;" |<span style="background:# | + | | style="vertical-align: middle; text-align: center;" |<span style="background:#0b9768">00 80 00 00 30 00 00 05</span> |
|- | |- | ||
| style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records) | | style="vertical-align: middle; text-align: center;" |Number of Data 2 (Number of Total Records) | ||
Line 355: | Line 435: | ||
Security State Flag Examples: | Security State Flag Examples: | ||
− | *1) Locked doors <span style="background:# | + | *1) Locked doors <span style="background:#0b9768">00 80 00 00 30 00 00 05</span> |
*2) Unlocked doors <span style="background:#d4f991">00 80 00 00 00 00 00 05</span> | *2) Unlocked doors <span style="background:#d4f991">00 80 00 00 00 00 00 05</span> | ||
Line 361: | Line 441: | ||
Then count 28'th BIT from the back (28'th bit value shows locked/unlocked states) | Then count 28'th BIT from the back (28'th bit value shows locked/unlocked states) | ||
− | *1) 100000000000000000000000001<span style="background:# | + | *1) 100000000000000000000000001<span style="background:#0b9768">1</span>0000000000000000000000000101 |
*2) 100000000000000000000000000<span style="background:#d4f991">0</span>0000000000000000000000000101 | *2) 100000000000000000000000000<span style="background:#d4f991">0</span>0000000000000000000000000101 | ||
− | If car is locked value is <span style="background:# | + | If car is locked value is <span style="background:#0b9768>1</span> and if car is unlocked value is <span style="background:#d4f991">0</span> |
+ | |||
+ | To test the car unlocking and locking use these GPRS commands | ||
+ | *1) To unlock all doors use this command: "lvcanopenalldoors" | ||
+ | *2) To lock all doors use this command: "lvcanclosealldoors" | ||
+ | |||
− | + | [[Category: Usage scenarios]] |
Latest revision as of 11:37, 28 March 2024
Main Page > General Information > Usage scenarios > Car Sharing SolutionDisclaimer
![Alert.png](/images/d/d6/Alert.png)
If you are not using Bluetooth®, please consider turning it off or change Bluetooth® PIN to remove potential risks.
If you are using Bluetooth® we strongly recommend using AES encryption for enhanced security.
Introduction
Recently, we have seen the development of car-sharing services used by private individuals, companies, and public institutions alike. These client groups, even though different, all seek comfortable and efficient use of vehicles. Reasons to use such services include fleet optimization, convenience, a sudden need for vehicles, business trips, trips abroad, etc. Also, such matters as car insurance, tire change, maintenance, or car wash are taken care of for the client. We're glad that you have decided to test our “Car Sharing” solution.
Solution description
This solution allows vehicles to be used in car-sharing businesses by monitoring vehicles location and other useful parameters from the vehicle's CAN-BUS such as fuel level, speed, odometer, etc. The most important feature is the ability to lock and unlock the vehicle on demand without a key which is an essential feature for car-sharing businesses. To use this solution FMX1XY device paired with a CAN-CONTROL adapter is needed to allow data to be read from the vehicle and most importantly for door locking and unlocking to be accessible remotely via smartphone or server.
Note: Active parameters are not sent when Ignition is Off when ODS, DS or UDS are configured because communication from device is turned off to conserve battery or lower consumption. To receive parameters - GPS sleep can be used, or no sleep should be used. GPS sleep only turns off GNSS part, everything else is left in operation. However, the consumption of this sleep mode is the highest.
Parameter list: https://wiki.teltonika-gps.com/view/FMB130_CAN_adapters#Send_data_with_0.2C_if_ignition_is_off
What you need for a solution?
- FMx1YX device (FMB130is taken as example) which is used to connect to a CAN-CONTROL adapter.
Other devices that work with this solution: |
FMB110, FMB120, FMB122, FMB125, FMU125, FMC125, FMM125, FMU130, FMC130, FMM130, FMU126 |
- The SIM card in order to get data to your server
- CAN-CONTROL adapter. The adapter allows you to control car doors and it works with many of our products
- FOTA WEB to remotely send the configuration to the device.
Installation
It’s important to hide the tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow mounting recommendations as well.
Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.
The main accessory for the solution is CAN-CONTROL adapter, please make sure that the right contacts are connected. Also, check more detailed information here and supported vehicle list.
To have a working solution it’s important to properly wire the devices. In the picture below it's shown how to correctly wire the devices.
During installation please follow recommendations in order to avoid damaging device and vehicle:
- Wires should be connected while the module is not plugged in.
- Be sure that after the car computer falls asleep, power is still available on the chosen wire. Depending on the car, this may happen in a 5 to 30 minutes period.
- When the module is connected, be sure to measure the voltage again if it did not decrease.
- The ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
Configuration
1. Prerequisites:
1.1. Read through First start guide
1.2. Understanding of possible Sleep modes.
2. Car sharing configuration:
Parameter ID – Parameter name GPRS settings:
- 2001 – APN
- 2002 – APN username (if there are no APN username, empty field should be left)
- 2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
- 2004 – Domain
- 2005 – Port
- 2006 – Data sending protocol (0 – TCP, 1 – UDP)
After successful GPRS/SERVER settings configuration, FMB130 device will synchronize time and update records to the configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.
Sleep settings:
- 102 – Sleep settings(0 – Disable, 1 – Gps sleep, 2 – Deep sleep, 3 – Online Deep sleep, 4 – Ultra sleep)
Note: This scenario will not work with Deep Sleep and Ultra Sleep modes, since they disable the device's GSM module to save power.
Can adapter settings:
- 45002 – CAN Adapter program number (This code is written in every connection diagram and it is specific for every vehicle model and make year)
- 45170 – Door status, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
- 45130 – Fuel level, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
- 45220 – Total milage (Counted), Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
- 45430 – Security State Flags, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
Quickstart: From default configuration to Car sharing solution in one SMS:
" setparam 2001:APN;2002:APN_user;2003:APN_password;2004:Domain;2005:Port;2006:0;102:3;45002:ProgramNumber;45170:1;45130:1;45220:1;45430:1"
This SMS will set up your device to report the Car Sharing scenario to the server and the possibility for remote control of vehicle components.
Note: Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings.
Parsing information
1.Prerequisites:
1.1. Open TCP/UDP port
1.2. Read Java parser first start guide
2. Parsing example:
Unparsed received data in hexadecimal stream |
---|
000000000000008F080100000177B0A5F838000000000000000000004400280D0000001F09EF00F0001504B301B40051005200590098000B42307443
0F8244000011001812002D13FFE85400BE5500005A0000970000A800000AF10000601A53000000005703CB6B986400002E 97660000000069023B33856B000065B27B000000007D00000000BD00000000018400800000300000050100005C92 |
AVL Data Packet Part | HEX Code Part |
---|---|
Zero Bytes | 00 00 00 00 |
Data Field Length | 00 00 00 8F |
Codec ID | 08 (Codec 8) |
Number of Data 1 (Number of Total Records) | 01 |
Timestamp | 00 00 01 77 B0 A5 F8 38 (Thursday, February 18, 2021 3:43:00 PM GMT+02:00) |
Priority | 00 |
Longitude | 00 00 00 00 |
Latitude | 00 00 00 00 |
Altitude | 00 44 |
Angle | 00 28 |
Satellites | 0D |
Speed | 00 00 |
Event IO ID | 00 |
N of Total ID | 1F |
N1 of One Byte IO | 09 |
1’st IO ID | EF (AVL ID: 239, Name: Ignition) |
1’st IO Value | 00 |
2’nd IO ID | F0 (AVL ID: 240, Name: Movement) |
2’nd IO Value | 00 |
3’rd IO ID | 15 (AVL ID: 21, Name: GSM Signal) |
3’rd IO Value | 04 |
4'th IO ID | B3 (AVL ID: 179, Name: Digital Output 1) |
4'th IO Value | 01 |
5'th IO ID | B4 (AVL ID: 180, Name: Digital Output 2) |
5'th IO Value | 00 |
6'th IO ID | 51 (AVL ID: 81, Name: Vehicle Speed) |
6'th IO Value | 00 |
7'th IO ID | 52 (AVL ID: 82, Name: Accelerator Pedal Position) |
7'th IO Value | 00 |
8'th IO ID | 59 (AVL ID: 89, Name: Fuel level) |
8'th IO Value | 00 |
9'th IO ID | 98 (AVL ID: 152, Name: Geofence zone 05) |
9'th IO Value | 00 |
N2 of Two Byte IO | 0B |
1’st IO ID | 42 (AVL ID: 66, Name: External Voltage) |
1’st IO Value | 30 74 |
2’nd IO ID | 43 (AVL ID: 67, Name: Battery Voltage) |
2’nd IO Value | 0F 82 |
3’rd IO ID | 44 (AVL ID: 68, Name: Battery Current) |
3’rd IO Value | 00 00 |
4'th IO ID | 11 (AVL ID: 17, Name: Axis X) |
4'th IO Value | 00 18 |
5'th IO ID | 12 (AVL ID: 18,Name: Axis Y) |
5'th IO Value | 0F 8A |
6'th IO ID | 13 (AVL ID: 19, Name: Axis Z) |
6'th IO Value | FF E8 |
7'th IO ID | 54 (AVL ID: 84,Name: Fuel level) |
7'th IO Value | 00 BE |
8'th IO ID | 55 (AVL ID:85, Name: Engine RPM) |
8’th IO Value | 00 00 |
9'th IO ID | 5A (AVL ID:90, Name: Door Status) |
9’th IO Value | 00 00 |
10'th IO ID | 97 (AVL ID:151, Name: Battery Temperature) |
10'th IO Value | 00 00 |
11'th IO ID | A8 (AVL ID: 168, Battery Voltage) |
11'th IO Value | 00 00 |
N4 of Four Byte IO | 0A |
1'st IO ID | F1 (AVL ID: 241, Name: Active GSM Operator) |
1’st IO Value | 00 00 60 1A |
2’nd IO ID | 53 (AVL ID: 83, Name: Fuel Consumed) |
2’nd IO Value | 00 00 00 00 |
3’rd IO ID | 57 (AVL ID: 87, Name: Total Mileage) |
3’rd IO Value | 03 CB 6B 98 |
4’th IO ID | 64 (AVL ID: 100, Name: Program Number) |
4’th IO Value | 00 00 2E 97 |
5’th IO ID | 66 (AVL ID: 102, Name: Engine Worktime) |
5’th IO Value | 00 00 00 00 |
6’th IO ID | 69 (AVL ID: 105, Name: Total Mileage (counted)) |
6’th IO Value | 02 3B 33 85 |
7’th IO ID | 6B (AVL ID: 107, Name: Fuel Consumed(counted)) |
7’th IO Value | 00 00 65 B2 |
8’th IO ID | 7B (AVL ID: 123, Name: Control State Flags) |
8’th IO Value | 00 00 00 00 |
9’th IO ID | 7D (AVL ID: 125, Name: Harvesting Time) |
9’th IO Value | 00 00 00 00 |
10’th IO ID | BD (AVL ID: 189, Name: Cruise Time) |
10’th IO Value | 00 00 00 00 |
N8 of Eight Byte IO | 01 |
1'st IO ID | 84 (AVL ID: 132, Name: Security State Flags) |
1’st IO Value | 00 80 00 00 30 00 00 05 |
Number of Data 2 (Number of Total Records) | 01 |
CRC-16 | 00 00 5C 92 |
Security State Flag Examples:
- 1) Locked doors 00 80 00 00 30 00 00 05
- 2) Unlocked doors 00 80 00 00 00 00 00 05
Convert HEX value to BIN value:
Then count 28'th BIT from the back (28'th bit value shows locked/unlocked states)
- 1) 10000000000000000000000000110000000000000000000000000101
- 2) 10000000000000000000000000000000000000000000000000000101
If car is locked value is 1 and if car is unlocked value is 0
To test the car unlocking and locking use these GPRS commands
- 1) To unlock all doors use this command: "lvcanopenalldoors"
- 2) To lock all doors use this command: "lvcanclosealldoors"