TST100 Product Change Notifications

Product change notifications (PCN) is way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. This page stores information regarding changes to the TST100. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

2023.02.09: TST100 END OF LIFE Announcement

The product End of Life (EOL) announcement signifies that a product has entered the final phase of Teltonika Product Life Cycle. Announcement serves as an advance notice of product termination in accordance with Teltonika EOL policy. Nevertheless, there is still enough time for you to order and get support that you need for the products that will be discontinued. Please contact your sales manager for more information.

End Of Production date: 2023-06-30
Last Order date: 2023-03-30
End of Bug-fixing date: 2024-09-30
End of Support date: 2025-03-30

2022.09.09: Base firmware update

We would like to inform you about the base firmware update for TST100 starting from 2022 October. New production firmware version will be 55.01.10.Rev.00.

Change description
Change type	Firmware update
Detailed description	Key improvements from last production firmware are listed in errata.
	Old version: 55.01.02.Rev.02	New version: 55.01.10.Rev.00
Change reasons	TST100 base firmware version update
Product release date	2022 October

Affected products
Model	Affected order codes	Order code changes
TST100	TST100******	Updated firmware version

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	To experience latest functionalities, we suggest to update your device's firmware to the latest. Firmware can be downloaded from here.

2021.10.26: Base firmware update

We would like to inform you about the base firmware update for TST100 starting from 2021 4th quarter. New production firmware version will be 55.01.02.Rev.01.

Change description
Change type	Firmware update
Detailed description	Key improvements from last production firmware are listed in errata.
	Old version: 55.00.22.Rev.00	New version: 55.01.02.Rev.01
Change reasons	TST100 base firmware version update
Product release date	2021 Q4

Affected products
Model	Affected order codes	Order code changes
TST100	TST100******	Updated firmware version

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	To experience latest functionalities, we suggest to update your device's firmware to the latest. Firmware can be downloaded from here.

2021.10.26: Flash memory component

We would like to inform you that new update is starting from 2021 4th quarter.

Change description
Change type	Hardware
Detailed description	Flash memory component
	Old Version: GD5F1GQ4UEYIG	New Version: XT26G01CWSIGT
Change reasons	Flash memory component has been changed due the old model being no longer available.

Affected products
Model	Affected order codes	Order code changes
TST100	TST100******	No changes

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	No actions required.

2021.08.23: Base firmware update

We would like to inform you about the base firmware update for TST100 starting from August 23rd, 2021. New production firmware version will be 55.00.22.Rev.00.

Change description
Change type	Firmware update
Detailed description	Key improvements from last production firmware are listed in errata.
	Old version: 55.00.09.Rev.1	New version: 55.00.22.Rev.00
Change reasons	TST100 base firmware version update
Product release date	2021 August

Affected products
Model	Affected order codes	Order code changes
TST100	TST100TSTSMP TST100TXMSMP TST100TXMAC2 TST100TSTAE0 TST100TSTAA0 TST100TNCAI0 TST100TSTAD0 TST100TSTAB0	Update firmware

Change impact
Risk assessment	Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically.
Suggested implementation plan	If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.

2021.08.22: Order code update

We would like to inform you about the changes with order codes for TST100 starting from August 22nd, 2021.

Change description
Change type	Order code update
Detailed description	Order codes were updated due to new Firmware release, which eliminated the mandatory pre-configured configuration installation on base firmware.
	Old code: TST100TSTAD1 --> TST100TSTAB1 -->	New code: TST100TSTAD0 TST100TSTAB0 Order codes were left the same but the configuration file removed: TST100TSTAA0 TST100TSTAE0 TST100TNCAI0 TST100TSTSMP
Change reasons	TST100 base firmware version update which removed mandatory protocol selection for Segway scooters.
Product release date	2021 August

Affected products
Model	Affected order codes	Order code changes
TST100	TST100TSTAD0 TST100TSTAB0 TST100TSTAA0 TST100TSTAE0 TST100TNCAI0 TST100TSTSMP	Configuration file removed.

Change impact
Risk assessment	No risk assessment
Suggested implementation plan	No suggestions.

2021.07.22: Segway holder changes

We would like to inform you, that TST100 holder model for Segway scooters was updated and will be added to production starting from September - October, 2021.

Change description
Change type	Mechanical part improvement
Detailed description	Segway holder changes
	Old TST100 holder for Segway scooters version:	New TST100 holder for Segway scooters version:
Change reasons	Due to feedback regarding holder breakage because of kick e-scooter's vandalism, we have decided to improve holder's rigidity.

Affected products
Model	Affected order codes	Order code changes
TST100	TST100TSTAD1; TST100TSTAF3; TST100TSTSMP; TST100TSTAH5; TST100TSTAE0; TST100TSTAJ6; TST100TSTAA0; TST100TSTAB1; TST100TSTAG4.	New, stronger holder for Segway kick e-scooters.

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	No suggestions.

2021.02.22: Xiaomi PCB pinout assembly changes

We would like to inform you, that TST100 device's Xiaomi PCB pinout assembly was updated in factory on the 22nd of February.

Change description
Change type	Assembly
Detailed description	PCB pinout assembly
	Old Xiaomi PCB pinout assembly version:	New Xiaomi PCB pinout assembly version:
Change reasons	Due to addition of Xiaomi M365 PRO kick e-scooter support with relay, additional wire (Blue wire in the image above) was required, which acts like regular TST100's PCW(Dout) wire.

Affected products
Model	Affected order codes	Order code changes
TST100	TST100TXMAC2; TST100TXMSMP	Additional Blue wire included to device's assembly

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	If the Blue wire is not nececssary for your solutions, make sure to isolate it with tape to prevent the contacts touching other wires when installed.

2020.12.01: Top Sticker Changes

We would like to inform you, that TOP sticker of TST100 device was updated in factory on the 2nd of December.

Change description
Change type	External/visual
Detailed description	Top Sticker design changed
	Old Versions:	New Versions:
Change reasons	Address, website and current (mA) values changed. Marketing name and manufacturer information added.

Affected products
Model	Affected order codes	Order code changes
TST100	TST100******	No changes

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process.

2019.07.22: New Eco friendly boxes

Effective September 2019, TST100 trackers will be shipped with a new eco friendly box.

Change description
Change type	Packaging
Detailed description	Improved and more environmentally friendly packaging box
	Old single packaging version: Dimensions: 165 (W) x 145 (D) x 35 (H)	New single packaging version: Dimensions: 173 (W) x 148 (D) x 71 (H)
Change reasons	The new box is better for the environment
Product release date	Devices with new packaging will be released in manufacturing from september with 2 months of transition period. Over this period devices with white packaging can be delivered as well as devices with the new eco boxes.

Affected products
Model	Affected order codes	Order code changes
TST100	TST100******.	No changes

Change impact
Risk assessment	No risk factors encountered with this change
Suggested implementation plan	Due to the new look of boxes we strongly recommend to update your marketing materials. Because of the new color of the packaging box, if necessary, update your branding materials (stickers, logo layouts).

2019.06.14: Device module information display changes

We would like to inform you, that information display on device module TM2500 will be updated in factory from july 2019.

Change description
Change type	External/visual
Detailed description	Information display on TM2500 module will change from sticker to laser print. Information provided on module will remain the same.
	Old Version:	New Version:
Change reasons	Laser printing will increase reliability, speed, and will reduce paper waste.

Affected products
Model	Affected order codes	Order code changes
TMT250, GH5200, TST100.	TMT250******, GH5200******, TST100******.	No changes

Change impact
Risk assessment	The change will not affect clients. All the module characteristics will remain unchanged. The only sticker on module will be changed to laser print. The displayed information will remain the same.
Suggested implementation plan.	Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in the customs clearance process.

Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2019.04.10: IMEI/SN display on device Changes

We would like to inform you, that IMEI/SN info display on TST100 device will be updated in factory from june 2019.

Change description
Change type	External/visual
Detailed description	IMEI/SN info on device display change from barcode to QR
	Old Version:	New Version:
	Change reasons	QR format will increase reliability and minimize error rate, because of the error correction feature and improved reading in low contrast.
Product release date	Devices with new QR Code format will be released in manufacturing from June with 2 months of transition period. Over this period devices with barcode can be delivered as well as devices with QR code.

Affected products
Model	Affected order codes	Order code changes
TST100	TST100******	No changes

Change impact
Risk assessment	Risk assessment for devices management required
Suggested implementation plan	Due to changes in device information display we strongly recommend to check, and prepare your tools to read QR codes.

Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above