Template:E scooter commands: Difference between revisions

Latest revision as of 06:14, 23 May 2023

E-Scooter Commands


Command	Description	Response	HW Support	Supported by
sclockctrl #	Used to lock/unlock E-Scooter. # = Value ↓ 0 - Unlock 1 - Lock	Yes	TST100	Xiaomi M365 Segway ES/MAX FitRider
scsetunits #	Used to change units. # = Value ↓ 0 - Kilometers (km) 1 - Miles (mi)	Yes	TST100	FitRider
scrstcnt #	Resets internal E-Scooter counters. # = Value ↓ 1 - single time 2 - total mileage 3 - total	Yes	TST100	FitRider
scsetledswitch #	This option disallows headlight control by scledctrl command, if LED switch is set to 1 (scledswitch 1) # = Value ↓ 0 - disable 1 - enable	Yes	TST100	FitRider
scledctrl	Turns ON/OFF LED but only if -> scsetledswitch 1, # = Value ↓ 0 - Turn OFF 1 - Turn ON For OKAI scooters values are: 0 - Turn off 1 - Blink 2 - Turn on	Yes	TST100	FitRider/Okai
scsetbtcode ######	Sets BT pairing code. ###### - 6 digits BT pairing code	Yes	TST100	Segway ES/MAX/Xiaomi M365
scsetspdlim <arg1> <arg2>	Sets E-Scooter's Speed limit. <arg1> - Mode <arg2> - Speed limit	Yes	TST100	Segway ES/MAX/FitRider/ Hergele/Okai
scsetmode #	Sets E-Scooter's operating mode. # = Value ↓ 0 - NORMAL 1 - ECO 2 - SPORT	Yes	TST100	Segway ES/MAX/ Hergele
scenginectrl #	Start or shut down the engine. # = Value ↓ 0 - Turn OFF the engine 1 - Turn ON the engine	Yes	TST100	Segway ES/MAX
screbootsys	Restart E-Scooter's system. Restart is available only in non-riding mode. Corresponding mark will be reset after completion of the operation.	Yes	TST100	Segway ES/MAX
scpoweroff	Shut down E-Scooter.	Yes	TST100	Segway ES/MAX
scsetcruiseswitch #	Cruise control switch. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX
sclookfor #	Enable looking for scooter functionality. Initiates headlight and taillight flash + buzzer beep. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX
scsetledswitch #	Headlight control. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX/ FitRider/Hergele
scsetbeepswitch #	Beep control switch. # = Value ↓ 0 - OFF 1 - ON	Yes	TST100	Segway ES/MAX
scbuzzerctrl <arg1> <arg2>	IoT buzzer control. <arg1> - 0 - OFF; 1 - ON <arg2> - timeout (sec)	Yes	TST100	Segway ES/MAX/Xiaomi M365
scgetbtcode	Returns BT pairing code	Yes	TST100	Segway ES/MAX/Xiaomi M365
scgetspdlim #	Returns Speed limit value for chosen operating mode. # = Value 0 - NORMAL mode 1 - ECO mode 2 - SPORT mode	Yes	TST100	Segway ES/MAX
scgetmode	Returns operating mode.	Yes	TST100	Segway ES/MAX
scgetcruiseswitch	Returns cruise control switch state.	Yes	TST100	Segway ES/MAX
scgetconfig	Returns E-Scooter's functions setup.	Yes	TST100	Segway ES/MAX
scgetledswitch	Returns headlight control switch state.	Yes	TST100	Segway ES/MAX
scsetalarmswitch <arg>	Beep control on alarm. <arg> - 0 - OFF; 1 - ON	Yes	TST100	Segway ES/MAX
scgetalarmswitch	Returns alarm control switch state.	Yes	TST100	Segway ES/MAX
scgetbeepswitch	Returns beep control switch state.	Yes	TST100	Segway ES/MAX
scsetconfig <arg1> <arg2>	E-Scooter's functions setup. <arg1> - 0 - 1^st instruction set; 1 - 2^nd instruction set <arg2> - 2 bytes value where each bit controls separate parameter	Yes	TST100	Segway ES/MAX
sciap <arg>	E-Scooter's firmware update force command. <arg> - 0 – Master control, 1 – BMS1 (internal battery), 2 - BMS2 (external battery), 3 - Instrument panel (scooter head), 4 – Cable Lock (Wired)	Yes	TST100	Segway ES/MAX
scbatopen	Opens battery lock for battery replacement	Yes	TST100	Segway MAX
sccableunlock	Unlock cable lock	Yes	TST100	Segway MAX (with Wired lock)

@@ Line 57: / Line 57: @@
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; background: white; text-align: center;" |''scledctrl''
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; background: white; text-align: left;" |
-Turns ON/OFF LED but only if -> scsetledswitch 0, # = Value ↓ <br />
+Turns ON/OFF LED but only if -> scsetledswitch 1, # = Value ↓ <br />
 - Turn OFF <br />
 - Turn ON <br />