Changes

# Gently open ECAN02 cover using plastic pry tool from both sides

# Gently open ECAN02 cover using plastic pry tool from both sides

# Glue double-sided adhesive tape to casing inside as shown in figure 2 remove backing material

# Insert CAN wires as shown in figure 3. Please make sure that correct slots are used (CAN High/CAN Low)

# Glue double-sided adhesive tape to casing

# Remove backing material on double-sided adhesive tape

# Insert CAN wires. Please make sure that correct slots are used (CAN High/CAN Low)

# Close the device.

# Close the device.

# Device is ready-to-use.

# Device is ready-to-use.

[[Image:{{{set_up_ECAN02_pic1|gently_open_ECAN02.png}}}|260px]][[Image:{{{set_up_ECAN02_pic2|insert_CAN_wires_to_ECAN02.png}}}|260px]][[Image:{{{set_up_ECAN02_pic3|close_ECAN02_cover.png}}}|260px]][[Image:{{{set_up_ECAN02_pic4|ECAN02_is_ready_to_use.png}}}|260px]]

[[File:ECAN02 (dvipusė įklijuojama) 01.png|frameless]]

[[File:ECAN02 (dvipusė įklijuojama) 02.png|frameless]]

[[File:ECAN02 (dvipusė įklijuojama) 03.png|frameless]]

[[File:ECAN02 (dvipusė įklijuojama) 04.png|frameless]]

[[File:ECAN02 (dvipusė įklijuojama) 05.png|frameless]]

[[File:ECAN02 (dvipusė įklijuojama) 06.png|frameless]]

[[File:ECAN02 (dvipusė įklijuojama) 07.png|frameless]]

==ECAN02 Certification & Approvals==

==ECAN02 Certification & Approvals==