BTS firmware errata: Difference between revisions

Revision as of 16:29, 9 December 2024

Introduction

We are always improving our device's performance, stability, and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.

This document describes BTSXXX platform devices firmware improvements, changes, new features implementations as well as current firmware release version.

Firmware versioning

Structure

BTS.VER.[X].[Y].[Z].[A].R.[#]

Syntax description
- X – major FW version.
- Y – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
- Z – major changes like bigger fixes, improvements and new features addition.
- A – special branches files name
- # – minor changes like small fixes and improvements.

Base versions


FIRMWARE VERSION	SUPPORTED HARDWARE
1.2.z.R.#	BTSID1, BTSMP1
FIRMWARE VERSION	RELEASE DATE	CHANGES
1.2.10.R.4	2023.11.30	Active Sensor Selection: Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission. 12 character name: Users can now assign names of up to 12 characters. Enabling them to configure their device with a full MAC address as the name. Auto-Disconnect Timer the device will disconnect from applications if not used for longer than 2 minutes without authorizing with PIN or after 10 minutes if inactive after authorizing. Improved pitch and roll response time to give up-to-date data. The device no longer restarts after changing configuration parameters. Other stability improvements
1.2.9.R.9	2024.02.23	Battery voltage sending with iBeacon and Eddystone advertisement protocols fixed
1.2.9.R.8	2023.05.01	Hibernate functionality PUK unlock functionality Battery low level flag changed from 2.7V to 2.2V Device is advertising every 1s after configuration change is saved for 1 minute to allow easier reconnection. Slight power consumption optimizations Stability improvements
1.2.8.R.3	2024.10.02	Revision shown in EYE app is now correct
1.2.8.R.2	2022.12.14	iBeacon protocol not triggering region monitoring on iOS. iBeacon protocol EYE devices not showing up in EYE App on Android devices running Android 13 based operating systems.
1.2.8.R.1	2022.07.21	Default advertising interval increased from 1 to 5 seconds Other stability and consumption improvements Calibrated RSSI values for Eddystone and iBeacons
1.2.1.R.0	2021.11.01	First base firmware release

ATEX versions

FIRMWARE VERSION	SUPPORTED HARDWARE
1.2.z.a.R.#	BTSID1 ATEX, BTSMP1 ATEX
FIRMWARE VERSION	RELEASE DATE	CHANGES
BTSX.1.2.10.ATEX.R.3	2024.11.12	First base firmware release

EN12830 versions

FIRMWARE VERSION	SUPPORTED HARDWARE
1.2.z.a.R.#	BTSMP1 EN12830
FIRMWARE VERSION	RELEASE DATE	CHANGES
BTSX.1.2.9.EN12830.R.10	2024.05.16	First base firmware release

@@ Line 8: / Line 8: @@
 * Structure
-  BTS.VER.[<code>X</code>].[<code>Y</code>].[<code>Z</code>].R.[<code>#</code>]
+  BTS.VER.[<code>X</code>].[<code>Y</code>].[<code>Z</code>].[<code>A</code>].R.[<code>#</code>]
 * Syntax description
-** <code>X</code> – major FW version.
+**<code>X</code> – major FW version.
 ** <code>Y</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
 ** <code>Z</code> – major changes like bigger fixes, improvements and new features addition.
-** <code>#</code> – minor changes like small fixes and improvements.
+** <code>A</code> – special branches files name
+**<code>#</code> – minor changes like small fixes and improvements.
 === Base versions ===
@@ Line 83: / Line 84: @@
 ! colspan="2" |SUPPORTED HARDWARE
 |-
-!1.2.z.R.#
+!1.2.z.a.R.#
 | colspan="2" |BTSID1 ATEX, BTSMP1 ATEX
 |-
@@ Line 91: / Line 92: @@
 |-
 |BTSX.1.2.10.ATEX.R.3
-|2023.11.30
+|2024.11.12
 |
 *	First base firmware release
@@ Line 101: / Line 102: @@
 ! colspan="2" |SUPPORTED HARDWARE
 |-
-!1.2.z.R.#
+!1.2.z.a.R.#
 | colspan="2" |BTSMP1 EN12830
 |-
@@ Line 109: / Line 110: @@
 |-
 |BTSX.1.2.9.EN12830.R.10
-|2023.11.30
+|2024.05.16
 |
 *	First base firmware release
 |}