Universal Device Test Guide: Difference between revisions

Line 14:

Here, we will go through five easy testing steps which will introduce you to Teltonika Telematics devices.

We will cover everything you need to start using the device - from inserting a SIM card and powering the device, to receiving ~~GPS~~ track information from your vehicle to the server.

We will cover everything you need to start using the device - from inserting a SIM card and powering the device, to receiving GNSS track information from your vehicle to the server.

Line 29:

** Teltonika Configurator software (download the latest version [[Teltonika Configurator versions|'''here''']])

* One of the following:

** A ~~GPS~~ tracking service (see overview [[Fleet Management platforms|'''here''']]), and/or

** A GNSS tracking service (see overview [[Fleet Management platforms|'''here''']]), and/or

** Teltonika TCP/UDP listener and parser (download the software [[Special:Redirect/file/Protocols and AVL parser pack.zip|'''here''']] (archive password: 1234)

Line 506:

{|

|-

|''Note!''||''If you have not yet set up a ~~GPS~~ tracking service, you can use Teltonika TCP/UDP listener (to receive data from the device) and Teltonika parser (to parse the received information). Download the software [[Special:Redirect/file/Protocols and AVL parser pack.zip|'''here''']] (archive password: 1234).''

|''Note!''||''If you have not yet set up a GNSS tracking service, you can use Teltonika TCP/UDP listener (to receive data from the device) and Teltonika parser (to parse the received information). Download the software [[Special:Redirect/file/Protocols and AVL parser pack.zip|'''here''']] (archive password: 1234).''

|}

The table below describes the most important parameters in the GPRS menu. This is the minimal required configuration for a device to start sending data to your server.