Jump to content
  • EN

Test-AC: Difference between revisions

From Teltonika Telematics Wiki
← Older editNewer edit →
VisualWikitext
No edit summary
No edit summary
Line 1: Line 1:
==Power Saving settings==
=SECO Scenario=
{{#switch: {{{model}}}
==Description==
| #default =
The SECO scenario (Secure Engine Cut Off) is a static scenario module responsible for controlling a digital output (DOUT) to cut off the engine based on configurable speed and movement conditions. It is typically triggered by remote commands (SMS or GPRS) and is used for security or immobilization purposes.
[[File:FTX power saving settings.png|right|500 px]]
| ATC700
| ATM700 =
[[File:ATX power saving settings.png|right|500 px]]
}}
Puts the device into a power-saving mode, preserving the power consumption from the external source or the internal battery.
{{#switch: {{{model}}}
| #default =
| ATC700
| ATM700 =
}}
 
===Online Sleep===
*In Online Sleep mode, the device manages the connection only when records need to be sent. The connection is opened at periodic intervals to send records and closed immediately after, without any timeout.
*Changing the Permanent Link setting during Online Sleep will wake up the device to apply the new configuration.
*With Permanent Link enabled, the device maintains a constant connection, sending records immediately as they are generated, rather than waiting for the next scheduled send. After sending connection remains open.
*All listed entry conditions must be met in order to enter Online Sleep.
*At least one exit condition must be met in order to wake up from Online Sleep.
<br>
 
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse; border-bottom: 3px solid #336699;">


=== <u> Parameters list </u>===
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse;">
<tr>
<tr>
<th style="width:1%; vertical-align: middle; text-align: center;">Module</th>
<th style="width:1%; vertical-align: middle; text-align: center;">PARAMETER NAME</th>
<th style="width:1%; vertical-align: middle; text-align: center;">Entry Conditions</th>
<th style="width:1%; vertical-align: middle; text-align: center;">PARAMETER ID (RELATED AVL ID)</th>
<th style="width:5%; vertical-align: middle; text-align: center;">Exit conditions</th>
<th style="width:5%; vertical-align: middle; text-align: center;">DESCRIPTION</th>
<th style="width:6%; vertical-align: middle; text-align: center;">Disabled functions</th>
<th style="width:6%; vertical-align: middle; text-align: center;">VALUES</th>
 
</tr>
</tr>
<tr>
<tr>


<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''Main'''''</td>
<td style="vertical-align: middle; text-align: center;"> SECO DOUT status </td>
<td style="vertical-align: middle; text-align: left; min-width: 550px; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: center;"> 396</td>
*Configured '''Ignition source''' is off.<br>
<td style="vertical-align: middle; text-align: center;"> XXX </td>
*Movement is not detected by the configured '''Movement source'''.<br>
<td style="vertical-align: middle; text-align: left;">'''0''' = SECO DOUT is '''OFF''' <br> '''1''' = SECO DOUT is '''pulsing''' <br> '''2''' = SECO DOUT is '''ON''' </td>
*Device time must be synchronized, as this condition depends on the ''Record Settings -> Saving / sending mode'' parameter<br>
**'''After Position Fix''' - device time is synchronized with GNSS satellites and GPS fix is obtained.<br>
**'''After Time Sync''' - device time is synchronized over NTP, NITZ, or GNSS satellites.<br>
**'''Always''' - device will enter sleep mode without time synchronization and GPS fix.<br>
*Sleep timeout is reached.<br>
*No SMS messages are being received.<br>
*No open Data sockets (ignored with enabled permanent link)<br>
*No active FOTA WEB connection progress.<br>
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 150px; border-bottom: 3px solid #336699;">
*Ignition is ON.<br>
*Movement is detected.<br>
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN1}} | *DIN1 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | *DIN2 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | *DIN3 is activated }}
*Periodic wake-up (if enabled).<br></td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 100px; border-bottom: 3px solid #336699;">
*GNSS<br>
*Odometer<br>
*Data acquisition<br>
*SNTP time synchronization<br>
*Overspeeding<br>
*Trip<br>
*Jamming Detection<br>
*Eco Driving<br>
</td>


</tr>
</tr>  
<tr>
<tr>


{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |
<td style="vertical-align: middle; text-align: center;"> Priority </td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''CAN'''''</td>
<td style="vertical-align: middle; text-align: center;"> 1039600 </td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: center;"> </td>
*No communication with Main module for 1 second.
<td style="vertical-align: middle; text-align: left;"> '''0''' = SECO  scenario is '''disabled''' <br> '''1''' = SECO scenario is '''low''' <br> '''2''' = SECO scenario is '''high''' <br>
*No configured CAN data is read for 5 seconds.
*At least 1 second has passed since the last module wake up.</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px; border-bottom: 3px solid #336699;"">
*Main module sends any request via UART.<br>
*Any CAN data is present on the CAN bus.<br></td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">  
*CAN
</td>
</td>
}}


</tr>
</tr>  
<tr>
<tr>
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual BT}} |
<td style="vertical-align: middle; text-align: left;">'''''BLE'''''</td>
<td style="vertical-align: middle; text-align: left;">
*Main module enters Online/Deep sleep modes.
*No communication with Main module for 1 second.
*At least 1 second has passed since the last module wake up.</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px;"">
*The device can wake up from sleep when a DIN input changes (detected through the external MCU).
*DIN pins remain active in sleep mode and can be used as wake-up sources for the device.</td>
<td style="vertical-align: middle; text-align: left;">
*BLE scanning</td>
}}


</tr>
<td style="vertical-align: middle; text-align: center;"> Speed </td>
</table>
<td style="vertical-align: middle; text-align: center;"> 12254 </td>
<td style="vertical-align: middle; text-align: center;"> Speed threshold at which the configured digital output (DOUT) will be activated. </td>
<td style="vertical-align: middle; text-align: left;"> Minimum value = '''0'''<br> Maximum value = '''255''' <br> Default value = '''10''' </td>
 
</tr>  
<tr>


===Deep Sleep===
<td style="vertical-align: middle; text-align: center;"> Speed pulse scenario </td>
{{#switch: {{{model}}}
<td style="vertical-align: middle; text-align: center;"> 12259 </td>
| #default =  
<td style="vertical-align: middle; text-align: center;">
*During Deep Sleep mode, the device generates and stores periodic records.
Speed threshold at which the configured digital output (DOUT) will be toggled. </td>
*All listed entry conditions must be met in order to enter Deep Sleep.
<td style="vertical-align: middle; text-align: left;"> Minimum value = '''0'''<br> Maximum value = '''255''' <br>Default value = '''10''' </td>
*At least one exit condition must be met in order to wake up from Deep Sleep.
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse; border-bottom: 3px solid #336699;">


</tr>
<tr>
<tr>
<th style="width:1%; vertical-align: middle; text-align: center;">Module</th>
<th style="width:1%; vertical-align: middle; text-align: center;">Entry Conditions</th>
<th style="width:5%; vertical-align: middle; text-align: center;">Exit conditions</th>
<th style="width:6%; vertical-align: middle; text-align: center;">Disabled functions</th>


</tr>
<td style="vertical-align: middle; text-align: center;">
<tr>
Speed check period </td>
<td style="vertical-align: middle; text-align: center;"> 12255 </td>
<td style="vertical-align: middle; text-align: center;"> Time span during which speed must be lower than configured for output to activate (GNSS on). </td>
<td style="vertical-align: middle; text-align: left;">  Minimum value = '''0'''<br> Maximum value = '''65535''' <br>Default value = '''10''' </td>


<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''Main'''''</td>
</tr>  
<td style="vertical-align: middle; text-align: left; min-width: 550px; border-bottom: 3px solid #336699;">
*Configured '''Ignition source''' is off.
*Movement is not detected by the configured '''Movement source'''.
*Device time must be synchronized, as this condition depends on the ''Record Settings -> Saving / sending mode'' parameter.
**'''After Position Fix''' - device time is synchronized with GNSS satellites and GPS fix is obtained.
**'''After Time Sync''' - device time is synchronized over NTP, NITZ, or GNSS satellites.
**'''Always''' - device will enter sleep mode without time synchronization and GPS fix.
*Sleep timeout is reached.
*No SMS messages are being received.
*No open Data sockets (ignored with enabled permanent link)<br>
*No active FOTA WEB connection progress.
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 150px; border-bottom: 3px solid #336699;">
*Ignition is ON.
*Movement is detected.
*Periodic wake-up (if enabled).
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 100px; border-bottom: 3px solid #336699;">
*Modem
*Record sending
*GNSS
*IMU (Inertial Measurement Unit)
*FOTA WEB
*LEDs (Navigation and Status)
*Odometer
*Data acquisition
*SNTP time synchronization
*Overspeeding
*Trip
*Jamming Detection
*Eco Driving
</td>
</tr>
<tr>
<tr>


{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |
<td style="vertical-align: middle; text-align: center;">
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''CAN'''''</td>
Movement timeout</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: center;"> 12256 </td>
*No communication with Main module for 1 second.
<td style="vertical-align: middle; text-align: center;"> Duration after which the DOUT will be activated if no movement is detected and GNSS is off. </td>
*No configured CAN data is read for 5 seconds.
<td style="vertical-align: middle; text-align: left;"> Minimum value = '''0'''<br> Maximum value = '''65535''' <br>Default value = '''30''' </td>
*At least 1 second has passed since the last module wake up.
</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px; border-bottom: 3px solid #336699;"">
*Main module sends any request via UART.
*Any CAN data is present on the CAN bus.
</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">  
*CAN
</td>
}}


</tr>
</tr>
<tr>
<tr>


{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual BT}} |
<td style="vertical-align: middle; text-align: center;">Eventual records</td>
<td style="vertical-align: middle; text-align: left;">'''''BLE'''''</td>
<td style="vertical-align: middle; text-align: center;"> 1039604</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: center;"> </td>
*Main module enters Online/Deep sleep modes.
<td style="vertical-align: middle; text-align: left;"> '''0''' = SECO status will be sent with both eventual and periodical records. <br> '''1''' = SECO status will be sent only when the event happens (an eventual record).</td>
*No communication with Main module for 1 second.
*At least 1 second has passed since the last module wake up.
</td>
<td style="vertical-align: middle; text-align: left; min-width: 150px;"">
*The device can wake up from sleep when a DIN input changes (detected through the external module).
*DIN pins remain active in sleep mode and can be used as wake-up sources for the device.
</td>
<td style="vertical-align: middle; text-align: left;">  
*BLE scanning
</td>
}}


</tr>
</tr>
</table>
<tr>
| ATC700
| ATM700 =
}}
===Power Off Sleep===
*All listed entry conditions must be met in order to enter Power Off Sleep.
*At least one exit condition must be met in order to wake up from Power Off Sleep.
When device goes into sleep mode, some modules are turned off to consume less power. Listed below are the modules and scenarios that are turned off in common with all modes and those that are disabled specifically for the '''Power off sleep''' mode:
<table class="nd-othertables_2" style="width:100%; border-collapse: collapse; border-bottom: 3px solid #336699;">


<tr>
<td style="vertical-align: middle; text-align: center;">Output control</td>
<th style="width:1%; vertical-align: middle; text-align: center;">Module</th>
<td style="vertical-align: middle; text-align: center;">12252</td>
<th style="width:1%; vertical-align: middle; text-align: center;">Entry Conditions</th>
<td style="vertical-align: middle; text-align: center;"> </td>
<th style="width:5%; vertical-align: middle; text-align: center;">Exit conditions</th>
<td style="vertical-align: middle; text-align: left;"> '''0''' = DOUT control is disabled <br> '''1''' = DOUT1 is controlled <br> '''2''' = DOUT2 is controlled <br> '''3''' = DOUT3 is controlled <br> '''4''' = DOUT4 is controlled</td>
<th style="width:6%; vertical-align: middle; text-align: center;">Disabled functions</th>


</tr>
</tr>
<tr>
<tr>


<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''Main'''''</td>
<td style="vertical-align: middle; text-align: center;">Output pulse</td>
<td style="vertical-align: middle; text-align: left; min-width: 550px; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: center;">12253</td>
*Configured '''Ignition source''' is off.
<td style="vertical-align: middle; text-align: center;"> </td>
*Movement is not detected by the configured '''Movement source'''.
<td style="vertical-align: middle; text-align: left;"> '''0''' = Disabled <br> '''1''' = Enabled </td>
*Device time must be synchronized, as this condition depends on the ''Record Settings -> Saving / sending mode'' parameter
**'''After Position Fix''' - device time is synchronized with GNSS satellites and GPS fix is obtained.
**'''After Time Sync''' - device time is synchronized over NTP, NITZ, or GNSS satellites.
**'''Always''' - device will enter sleep mode without time synchronization and GPS fix.
*Sleep timeout is reached.
*No SMS messages are being received.
*No open Data sockets (ignored with enabled permanent link)<br>
*No active FOTA WEB connection progress.
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN1}} | *DIN1 is deactivated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | *DIN2 is deactivated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | *DIN3 is deactivated }}
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 150px; border-bottom: 3px solid #336699;">
*Ignition is ON.
*Movement is detected.
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN1}} | *DIN1 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | *DIN2 is activated }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | *DIN3 is activated }}
</td>
<td style="vertical-align: middle; horizontal-align: center; min-width: 100px; border-bottom: 3px solid #336699;">  
*Modem
*Record sending
*GNSS
*IMU (Inertial Measurement Unit)
*FOTA WEB
*Charger service
*LEDs (Navigation and Status)
*Odometer
*Data acquisition
*SNTP time synchronization
*Overspeeding
*Trip
*Unplug Detection
*Jamming Detection
*Eco Driving
</td>


</tr>
</tr>
<tr>
<tr>


{{#if: {{FTX Pin Support List|model={{{model}}}|pin=Manual CAN}} |
<td style="vertical-align: middle; text-align: center;">
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">'''''CAN'''''</td>
DOUT on duration</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">
<td style="vertical-align: middle; text-align: center;">12257</td>
*Main module enters power off sleep mode.
<td style="vertical-align: middle; text-align: center;"> </td>
</td>
<td style="vertical-align: middle; text-align: left;"> Minimum value = '''10'''<br> Maximum value = '''5000''' <br>Default value = '''1000''' </td>
<td style="vertical-align: middle; text-align: left; min-width: 150px; border-bottom: 3px solid #336699;"">
*Main module wakes up and restarts CAN module.
</td>
<td style="vertical-align: middle; text-align: left; border-bottom: 3px solid #336699;">  
*CAN (''does not receive requests, does not read CAN bus messages'')
</td>
}}


</tr>
</tr>
<tr>
<tr>
{{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT}} |
 
<td style="vertical-align: middle; text-align: left;">'''''BLE'''''</td>
<td style="vertical-align: middle; text-align: center;">DOUT off duration</td>
<td style="vertical-align: middle; text-align: left;">
<td style="vertical-align: middle; text-align: center;">12258</td>
*Main module enters power off sleep mode.
<td style="vertical-align: middle; text-align: center;"> </td>
</td>
<td style="vertical-align: middle; text-align: left;"> Minimum value = '''10'''<br> Maximum value = '''5000''' <br>Default value = '''1000''' </td>
<td style="vertical-align: middle; text-align: left; min-width: 150px;"">
*Main module wakes up and restarts BLE module.
</td>
<td style="vertical-align: middle; text-align: left;">  
*BLE Scanning
</td>
}}


</tr>
</tr>
</table>
</table>

Revision as of 11:51, 23 February 2026

SECO Scenario

Description

The SECO scenario (Secure Engine Cut Off) is a static scenario module responsible for controlling a digital output (DOUT) to cut off the engine based on configurable speed and movement conditions. It is typically triggered by remote commands (SMS or GPRS) and is used for security or immobilization purposes.

Parameters list

PARAMETER NAME PARAMETER ID (RELATED AVL ID) DESCRIPTION VALUES
SECO DOUT status 396 XXX 0 = SECO DOUT is OFF
1 = SECO DOUT is pulsing
2 = SECO DOUT is ON
Priority 1039600 0 = SECO scenario is disabled
1 = SECO scenario is low
2 = SECO scenario is high
Speed 12254 Speed threshold at which the configured digital output (DOUT) will be activated. Minimum value = 0
Maximum value = 255
Default value = 10
Speed pulse scenario 12259 Speed threshold at which the configured digital output (DOUT) will be toggled. Minimum value = 0
Maximum value = 255
Default value = 10
Speed check period 12255 Time span during which speed must be lower than configured for output to activate (GNSS on). Minimum value = 0
Maximum value = 65535
Default value = 10
Movement timeout 12256 Duration after which the DOUT will be activated if no movement is detected and GNSS is off. Minimum value = 0
Maximum value = 65535
Default value = 30
Eventual records 1039604 0 = SECO status will be sent with both eventual and periodical records.
1 = SECO status will be sent only when the event happens (an eventual record).
Output control 12252 0 = DOUT control is disabled
1 = DOUT1 is controlled
2 = DOUT2 is controlled
3 = DOUT3 is controlled
4 = DOUT4 is controlled
Output pulse 12253 0 = Disabled
1 = Enabled
DOUT on duration 12257 Minimum value = 10
Maximum value = 5000
Default value = 1000
DOUT off duration 12258 Minimum value = 10
Maximum value = 5000
Default value = 1000
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Test-AC&oldid=111404"