Difference between revisions of "Template:FMB0 First start card"

From Wiki Knowledge Base | Teltonika GPS
(Undo revision 44767 by Kriauciunas.to (talk))
Line 19: Line 19:
 
Device is ready to be connected.
 
Device is ready to be connected.
  
−
{{{insert1|[[Image:Fmc001_cover_1.png|280px]]}}}{{{insert2|[[Image:Fmc001_cover_2.png|280px]]}}}{{{insert3|[[Image:Fmc001_battery_1.png|280px]]}}}{{{insert4|[[Image:Fmc0010_cover_3.png|280px]]}}}
+
{{{insert1|[[Image:Fmb010_cover_1.png|280px]]}}}{{{insert2|[[Image:Fmb010_cover_2.png|280px]]}}}{{{insert3|[[Image:Fmb010_battery_1.png|280px]]}}}{{{insert4|[[Image:Fmb010_cover_3.png|280px]]}}}
  
  

Revision as of 12:29, 13 September 2019

Qsg rut950 teltonika.PNG


Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

FMB001 00 demo.png




How to insert Micro-SIM card and connect battery

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4. Attach device cover back.

Device is ready to be connected.

Fmb010 cover 1.pngFmb010 cover 2.pngFmb010 battery 1.pngFmb010 cover 3.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert SD card into FMB1YX

Insert SD card as shown.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.

Fmb010 sd card 0.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB0_First_start_card&oldid=44768"