Difference between revisions of "Sending SMS to FMB devices with 1nce platform"
From Wiki Knowledge Base | Teltonika GPS
| Line 5: | Line 5: | ||
| − | By going to the tab "My SIMs" you will see the list of 1nce SIM cards that are in your account. (It is possible to filter your available SIM cards by IMSI/ICCID/MSISDN/IMEI/IP ADDRESS) | + | *By going to the tab "My SIMs" you will see the list of 1nce SIM cards that are in your account. (It is possible to filter your available SIM cards by IMSI/ICCID/MSISDN/IMEI/IP ADDRESS) |
| − | [[Image:1nce Platform.png|center| | + | [[Image:1nce Platform.png|center||600px]] |
| − | |||
| − | |600px]] | ||
| − | To send SMS commands to the device. Select the SIM card to which the SMS command has to be sent. You will be forwarded to the "SMS" tab. | + | *To send SMS commands to the device. Select the SIM card to which the SMS command has to be sent. You will be forwarded to the "SMS" tab. |
| − | Enter a Source Address which has to be a valid value. (Recommended | + | Enter a Source Address which has to be a valid value. (Recommended values from 1 to 65535). |
<br /> | <br /> | ||
In the "Payload" field enter the desired SMS command. | In the "Payload" field enter the desired SMS command. | ||
| Line 18: | Line 16: | ||
In the example "setdigout 1" command is sent. | In the example "setdigout 1" command is sent. | ||
| − | [[Image:1nce_Platform_2.png|center| | + | [[Image:1nce_Platform_2.png|center||600px]] |
| − | |||
| − | |600px]] | ||
| − | SMS command in payload has to be entered: | + | *SMS command in payload has to be entered: |
| − | |||
If you have set SMS login and password: login pass getinfo | If you have set SMS login and password: login pass getinfo | ||
<br /> | <br /> | ||
If SMS login and password are not set leave two spaces before command: aagetinfo | If SMS login and password are not set leave two spaces before command: aagetinfo | ||
Revision as of 16:24, 5 February 2020
Main Page > Frequently Asked Questions - FAQ > Sending SMS to FMB devices with 1nce platformIf you are using 1nce IoT SIM Cards with FMB devices. It is possible to send SMS commands to devices from the 1nce Platform.
This can be done by logging into their platform from the website https://1nce.com/en/
- By going to the tab "My SIMs" you will see the list of 1nce SIM cards that are in your account. (It is possible to filter your available SIM cards by IMSI/ICCID/MSISDN/IMEI/IP ADDRESS)
- To send SMS commands to the device. Select the SIM card to which the SMS command has to be sent. You will be forwarded to the "SMS" tab.
Enter a Source Address which has to be a valid value. (Recommended values from 1 to 65535).
In the "Payload" field enter the desired SMS command.
In the example "setdigout 1" command is sent.
- SMS command in payload has to be entered:
If you have set SMS login and password: login pass getinfo
If SMS login and password are not set leave two spaces before command: aagetinfo
