Template:FMB002 First start card: Difference between revisions

VisualWikitext

Revision as of 10:25, 9 April 2020

Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

How to insert Micro-SIM card and connect battery

Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.
Insert Nano-SIM card as shown with PIN request disabled' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.
Connect the battery as shown in the figure.
After configuration, see “PC Connection (Windows)”, attach device cover back.

Device is ready to be mounted.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

@@ Line 12: / Line 12: @@
 =='''How to insert Micro-SIM card and connect battery'''==
-#  Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
+# Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.
-# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
+# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.
-# Attach the SIM card tray back.
+# Connect the battery as shown in the figure.
-# Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
-# Connect the battery as shown to device.
 # After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.