Analog Fuel Sensor: Difference between revisions

Line 2:

==Introduction==

Fuel tracking is one of the key challenges in the current field of fleet management. ~~To make this as accurate as possible~~, ~~Teltonika offers a wide range of devices with an analog input~~ to ~~which~~ the ~~analog~~ fuel sensor ~~can be connected~~.

Fuel tracking is one of the key challenges in the current field of fleet management. If the vehicle has a factory installed Analog Fuel Sensor, you can connect the device via AIN to read the fuel data straight from the sensor.

<br>

~~All modern vehicles has an analog fuel sensor which is designed to monitor, maintain,~~ and ~~measure liquid levels. Once the liquid level is detected, the sensor converts the perceived data into an electric signal~~.

Instructions of connection and configuration are listed below.

<br>

*Supported by <span class="mw-collapsible mw-collapsed"> [https://wiki.teltonika-gps.com/view/MTB100 MTB100], [https://wiki.teltonika-gps.com/view/MSP500 MSP500], [https://wiki.teltonika-gps.com/view/FMB125 FMB125], [https://wiki.teltonika-gps.com/view/FMU125 FMU125], [https://wiki.teltonika-gps.com/view/FMM125 FMM125], [https://wiki.teltonika-gps.com/view/FMC125 FMC125], [https://wiki.teltonika-gps.com/view/FMU125 FMU126], [https://wiki.teltonika-gps.com/view/FMB202 FMB202], [https://wiki.teltonika-gps.com/view/FMB204 FMB204], [https://wiki.teltonika-gps.com/view/FMB900 FMB900], [https://wiki.teltonika-gps.com/view/FMB910 FMB910], [https://wiki.teltonika-gps.com/view/FMB920 FMB920] </span>