Difference between revisions of "Inateck BCST-70 First Start"

From Wiki Knowledge Base | Teltonika GPS
m (Protected "Inateck BCST-70 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
(No difference)

Revision as of 10:32, 2 May 2023

Main Page > Accessories > Inateck BCST-70 Barcode Scanner > Inateck BCST-70 First Start

Inateck Barcode Scanner Configuration

Configure Scanner to use Enter as Suffix


Power on Inateck BCST-70 by toggling switch from OFF to ON.


IMPORTANT NOTE : Inateck Scanner could not scan Barcodes through screen/monitor, barcodes should be printed as hard copy to proceed on the configuration.


  1. Scan the "Enter Setup" barcode

    Enter Setup.png

  2. Scan the "Apply Enter as Stop Character" barcode

    Stop Character1.png

  3. Scan the "Exit with Save" barcode

    Exit Save.png

Configure Scanner to SPP Mode


BCST-70 has Bluetooth capability that supports data transmission under HID and SPP two modes. When under HID mode, the BCST-70 connects your phone or computer automatically after pairing successfully. When under SPP mode, the BCST-70 can only finish connecting your phone or laptop with help of serial debugging tools after pairing successfully. For connection with Teltonika FM devices, scanner must use SPP Mode.


IMPORTANT NOTE : If scanner does not use SPP mode, Teltonika FM device would not detect the scanner under the Bluetooth tab


  1. Scan the "Enter Setup" barcode

    Enter Setup.png

  2. Scan the "Apply Enter as Stop Character" barcode

    SPP Mode.png

  3. Scan the "Exit with Save" barcode

    Exit Save.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Inateck_BCST-70_First_Start&oldid=85188"