Changes

Line 4: Line 4:     
===RS-485 modes===
 
===RS-485 modes===
 +
* RS-485 receive (FMB silent) mode:
 +
RS485 Works in receive mode. Support debug and testing commands. When command is received answer is sent after that it back up to Receive mode.<br/>
 +
 
* RS-485 transmit (FMB log) mode:
 
* RS-485 transmit (FMB log) mode:
 
RS-485 prints FMB device log and does not respond to commands.<br/>
 
RS-485 prints FMB device log and does not respond to commands.<br/>
   −
* RS-485 transmit (GNSS NMEA) mode:
+
* RS-485 transmit (NMEA) mode:
 
RS-485 prints GNSS NMEA log and does not respond to commands.<br/>
 
RS-485 prints GNSS NMEA log and does not respond to commands.<br/>
   Line 13: Line 16:  
This mode supports up to five LLS fuel level sensors each of which has a receiver ID.<br/>
 
This mode supports up to five LLS fuel level sensors each of which has a receiver ID.<br/>
   −
* RS-485 TCP (ASCII/Binary) modes:
+
* RS-485 TCP receive (ASCII/Binary) modes:
 
In TCP ASCII/Binary mode a link with an external device using text messages can be established.
 
In TCP ASCII/Binary mode a link with an external device using text messages can be established.