46
edits
Changes
Teltonika FMx 640 With TCP Link Mode (view source)
Revision as of 14:04, 21 February 2023
, 14:04, 21 February 2023no edit summary
'''1.''' First you have to connect the FMx640 with the RS232. On COM1 The below picture illustrates the connection:
==='''1.''' First you have to connect the FMx640 with the RS232. On COM1 The below picture illustrates the connection:===
[[File:FMC640 RS232 fuad.jpg|center|thumb|500x500px|A Picture to Illustrate the Physical Connection from device side.]]
'''2.''' Second step after the connections, you must configure the FMx640:
==='''2.''' Second step after the connections, you must configure the FMx640:===
The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port you are using) in global parameters window. You have to modify the server sittings to you PC IP and your TCP port.
The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port you are using) in global parameters window. You have to modify the server sittings to you PC IP and your TCP port.
'''3.''' Establishing FMx test link with server through Hercules and sending messages with Hercule:
==='''3.''' Establishing FMx test link with server through Hercules and sending messages with Hercule:===
'''4.''' Receiving messages with Hercules:
==='''4.''' Receiving messages with Hercules:===
In this step we need to use the terminal log. When you want to send a message from FMx 640 to the server, write it in Terminal but change your com port and select port which is assigned for COM1/COM2.
In this step we need to use the terminal log. When you want to send a message from FMx 640 to the server, write it in Terminal but change your com port and select port which is assigned for COM1/COM2.
'''The Conclusion of this test:'''
==='''The Conclusion of this test:'''===
In this mode link with an external device for example PC using text messages can be established. We can apply this scenario on FMx640 or FMx125 which have to be connected to the external device through RS232 or RS485. Any string of data coming to device via RS232 or RS485 will be routed to the server ''(if the link is currently active)''. Messages that are exchanged between FMx device and server, have to be packed in Codec.12 format and will receive to the Hercules receiver successfully.
In this mode link with an external device for example PC using text messages can be established. We can apply this scenario on FMx640 or FMx125 which have to be connected to the external device through RS232 or RS485. Any string of data coming to device via RS232 or RS485 will be routed to the server ''(if the link is currently active)''. Messages that are exchanged between FMx device and server, have to be packed in Codec.12 format and will receive to the Hercules receiver successfully.