Changes

==='''1.'''    First you have to connect the FMx640 with the RS232. On COM1 The below picture illustrates the connection:===

==='''Step 1.'''    First you have to connect the FMx640 with the RS232. On COM1 The below picture illustrates the connection:===

[[File:FMC640 RS232 fuad.jpg|center|thumb|500x500px|A Picture to Illustrate the Physical Connection from device side.]]

[[File:FMC640 RS232 fuad.jpg|center|thumb|500x500px|A Picture to Illustrate the Physical Connection from device side.]]

==='''2.'''    Second step after the connections, you must configure the FMx640:===

==='''Step 2.'''    Second step after the connections, you must configure the FMx640:===

The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port you are using) in global parameters window. You have to modify the server sittings to you PC IP and your TCP port.  

The FMx configurator you have to set parameters for COM1 or COM2 (depends on which COM port you are using) in global parameters window. You have to modify the server sittings to you PC IP and your TCP port.  

==='''3.'''     Establishing FMx test link with server through Hercules and sending messages with Hercule:===

==='''Step 3.'''     Establishing FMx test link with server through Hercules and sending messages with Hercule:===

==='''4.'''     Receiving messages with Hercules:===

==='''Step 4.'''     Receiving messages with Hercules:===

In this step we need to use the terminal log.  When you want to send a message from FMx 640 to the server, write it in Terminal but change your com port and select port which is assigned for COM1/COM2.

In this step we need to use the terminal log.  When you want to send a message from FMx 640 to the server, write it in Terminal but change your com port and select port which is assigned for COM1/COM2.