TEST-T: Difference between revisions
Replaced content with "Teltonika" Tag: Replaced |
No edit summary |
||
| Line 1: | Line 1: | ||
===Commands apply for FMB920:=== | |||
All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.<br />If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device. | |||
SMS command structure: | |||
<SMS login><space><SMS password><space><command><space><value> | |||
SMS command [[FMB getinfo|getinfo]] example: | |||
*If you have set SMS login and password: <code>login pass getinfo</code> | |||
*If SMS login and password are not set leave two spaces before command: <code> getinfo</code> | |||
<br /> | |||
GPRS commands require [[Codec#Codec 12|Codec 12]] protocol. | |||
__TOC__ | |||
===Common commands=== | |||
---- | |||
<table class="nd-othertables_2"> | |||
<tr> | |||
<th style="width:15%; text-align: center;">Command</th> | |||
<th style="width:35%; text-align: center;">Description</th> | |||
<th style="width:10%; text-align: center;">Response</th> | |||
<th style="width:15%; text-align: center;">Parameter Group</th> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB allver|allver]]'''</td> | |||
<td style="text-align: left;">To get all possible versions used by device<br/><br/>Request format: <code>allver</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:capture_clean|auto_calibrate:capture_clean]]'''</td> | |||
<td style="text-align: left;">Start Trip Simulator capturing and reset AXL calibration<br/><br/>Request format: <code>auto_calibrate:capture_clean</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:clear|auto_calibrate:clear]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>auto_calibrate:clear</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:set|auto_calibrate:set]]'''</td> | |||
<td style="text-align: left;">Initiates auto calibration process and sets calibration vectors<br/><br/>Request format: <code>auto_calibrate:set G1,2,3 R4,5,6</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:status|auto_calibrate:status]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>auto_calibrate:status</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:stop_capture|auto_calibrate:stop_capture]]'''</td> | |||
<td style="text-align: left;">Stop capture and move Trip Simulator file to logs<br/><br/>Request format: <code>auto_calibrate:stop_capture</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:tryforever|auto_calibrate:tryforever]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>auto_calibrate:tryforever</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB battery|battery]]'''</td> | |||
<td style="text-align: left;">To get battery state<br/><br/>Request format: <code>battery</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB bbinfo|bbinfo]]'''</td> | |||
<td style="text-align: left;">To get blackbox information with event timestamps<br/><br/>Request format: <code>bbinfo 20</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB bbread|bbread]]'''</td> | |||
<td style="text-align: left;">To get blackbox information<br/><br/>Request format: <code>bbread 20</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB None|None]]'''</td> | |||
<td style="text-align: left;">Forwards data to connected device (Server->BT communication)<br/><br/>Request format: <code> | |||
# BT DAT= Test | |||
</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB buzz|buzz]]'''</td> | |||
<td style="text-align: left;">To set buzzer ON/OFF for a specified timeout<br/><br/>Request format: <code>buzz 1 60</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB calibrate|calibrate]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>calibrate</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB canflashstats|canflashstats]]'''</td> | |||
<td style="text-align: left;">Prints various statistics about FMCAN flash usage<br/><br/>Request format: <code>canflashstats</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB cleardigoutprio|cleardigoutprio]]'''</td> | |||
<td style="text-align: left;">To clear DOUT priorities<br/><br/>Request format: <code>cleardigoutprio 1 2</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB countrecs|countrecs]]'''</td> | |||
<td style="text-align: left;">To get record count<br/><br/>Request format: <code>countrecs</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB cpureset|cpureset]]'''</td> | |||
<td style="text-align: left;">To reset CPU and restart device<br/><br/>Request format: <code>cpureset</code></td> | |||
<td style="text-align: center;">No</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB defaultcfg|defaultcfg]]'''</td> | |||
<td style="text-align: left;">To reset configuration to its default<br/><br/>Request format: <code>defaultcfg</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB deleterecords|deleterecords]]'''</td> | |||
<td style="text-align: left;">To delete stored records<br/><br/>Request format: <code>deleterecords</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB delkey|delkey]]'''</td> | |||
<td style="text-align: left;">To delete configuration keyword<br/><br/>Request format: <code>delkey oldkey</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB exceptions|exceptions]]'''</td> | |||
<td style="text-align: left;">To get exception list<br/><br/>Request format: <code>exceptions</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB fc_|fc_]]'''</td> | |||
<td style="text-align: left;">To reset fuel consumption parameters<br/><br/>Request format: <code>fc_ reset</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB file upl req|file upl req]]'''</td> | |||
<td style="text-align: left;">To upload file<br/><br/>Request format: <code>file upl req firmware,example.com,80,apn,user,pass</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB FIXTEST|FIXTEST]]'''</td> | |||
<td style="text-align: left;">Performs HOT/WARM/COLD fix tests and returns performance results<br/><br/>Request format: <code>FIXTEST 1 4 40 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB flush|flush]]'''</td> | |||
<td style="text-align: left;">To initiate data (record) sending<br/><br/>Request format: <code>flush 123456789012345,apn,login,pass,192.168.1.1,8080</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB fwstats|fwstats]]'''</td> | |||
<td style="text-align: left;">Get data about FW and restarts<br/><br/>Request format: <code>fwstats 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getcontsens|getcontsens]]'''</td> | |||
<td style="text-align: left;">To get continuous sensor count and IDs<br/><br/>Request format: <code>getcontsens</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getgps|getgps]]'''</td> | |||
<td style="text-align: left;">To get GPS moment data<br/><br/>Request format: <code>getgps</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getimeiccid|getimeiccid]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>getimeiccid</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getimsi|getimsi]]'''</td> | |||
<td style="text-align: left;">Get ACTIVE SIM IMSI number<br/><br/>Request format: <code>getimsi</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getinfo|getinfo]]'''</td> | |||
<td style="text-align: left;">To get information about device<br/><br/>Request format: <code>getinfo</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getio|getio]]'''</td> | |||
<td style="text-align: left;">To get IO status<br/><br/>Request format: <code>getio</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getops|getops]]'''</td> | |||
<td style="text-align: left;">Get visible operators list<br/><br/>Request format: <code>getops</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getparam|getparam]]'''</td> | |||
<td style="text-align: left;">To get parameter value<br/><br/>Request format: <code>getparam 2001</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getrecord|getrecord]]'''</td> | |||
<td style="text-align: left;">SMS command initiates saving and sending of high priority record<br/><br/>Request format: <code>getrecord</code></td> | |||
<td style="text-align: center;">No</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getstatus|getstatus]]'''</td> | |||
<td style="text-align: left;">To get device status information<br/><br/>Request format: <code>getstatus</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getver|getver]]'''</td> | |||
<td style="text-align: left;">To get version information<br/><br/>Request format: <code>getver</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB ggps|ggps]]'''</td> | |||
<td style="text-align: left;">To get location information with google link<br/><br/>Request format: <code>ggps</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB ggpsutc|ggpsutc]]'''</td> | |||
<td style="text-align: left;">To get location information with google link (adjusts time per configurator time zone)<br/><br/>Request format: <code>ggpsutc</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB log2sd|log2sd]]'''</td> | |||
<td style="text-align: left;">To set logging configuration<br/><br/>Request format: <code>log2sd 2,30,example.com,80</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB log2sdfilterset|log2sdfilterset]]'''</td> | |||
<td style="text-align: left;">To set filters of device log<br/><br/>Request format: <code>log2sdfilterset 1;2;3</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB lowpowermode|lowpowermode]]'''</td> | |||
<td style="text-align: left;">To enable/disable Low Power Mode (LPM)<br/><br/>Request format: <code>lowpowermode 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB None|None]]'''</td> | |||
<td style="text-align: left;">Forwards data to OBD<br/><br/>Request format: <code> | |||
# OBDFWD= DATA | |||
</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB obdudscmd|obdudscmd]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>obdudscmd 0x01,mode,did,data,cra</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB obdudsrdbid|obdudsrdbid]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>obdudsrdbid 0x01,0x02,0x03</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB privatemode|privatemode]]'''</td> | |||
<td style="text-align: left;">To turn private mode ON/OFF<br/><br/>Request format: <code>privatemode ON</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB readio|readio]]'''</td> | |||
<td style="text-align: left;">To get IO element data<br/><br/>Request format: <code>readio 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB reset_axl_calib|reset_axl_calib]]'''</td> | |||
<td style="text-align: left;">To reset AXL calibration<br/><br/>Request format: <code>reset_axl_calib</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB savecontsens|savecontsens]]'''</td> | |||
<td style="text-align: left;">Saves currently visible sensor IDs to flash<br/><br/>Request format: <code>savecontsens</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB sdformat|sdformat]]'''</td> | |||
<td style="text-align: left;">To format SD storage<br/><br/>Request format: <code>sdformat</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB secooff|secooff]]'''</td> | |||
<td style="text-align: left;">To turn off Seco functionality<br/><br/>Request format: <code>secooff</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB secoon|secoon]]'''</td> | |||
<td style="text-align: left;">To turn on Seco functionality<br/><br/>Request format: <code>secoon</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB setbtdataperiod|setbtdataperiod]]'''</td> | |||
<td style="text-align: left;">To set NMEA log period (0-255)<br/><br/>Request format: <code>setbtdataperiod 10</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB setdigout|setdigout]]'''</td> | |||
<td style="text-align: left;">Set digital output<br/><br/>Request format: <code>setdigout 1 30</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB setdigoutm|setdigoutm]]'''</td> | |||
<td style="text-align: left;">Set digital output with priority (forces DOUT setting)<br/><br/>Request format: <code>setdigoutm 1 30</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB setigndigout|setigndigout]]'''</td> | |||
<td style="text-align: left;">Controls DOUTs after ignition is turned off with specified timeouts and delays<br/><br/>Request format: <code>setigndigout 1 15 20 1 15 20</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB setkey|setkey]]'''</td> | |||
<td style="text-align: left;">To set or change configuration keyword<br/><br/>Request format: <code>setkey oldkey newkey</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB setparam|setparam]]'''</td> | |||
<td style="text-align: left;">To set parameter value<br/><br/>Request format: <code>setparam 2001:wap</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB None|None]]'''</td> | |||
<td style="text-align: left;">Forwards data to connected device (client or server connection)<br/><br/>Request format: <code> | |||
# SPP DAT= Test | |||
</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB tpcmdconnect|tpcmdconnect]]'''</td> | |||
<td style="text-align: left;">Connects to third party AWS MQTT server and listens for secoon or secooff commands<br/><br/>Request format: <code>tpcmdconnect example.com;8883;30</code></td> | |||
<td style="text-align: center;">No</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB tsensors|tsensors]]'''</td> | |||
<td style="text-align: left;">To get Dallas temperature sensor data<br/><br/>Request format: <code>tsensors</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB wdlog|wdlog]]'''</td> | |||
<td style="text-align: left;">To get watchdog status<br/><br/>Request format: <code>wdlog</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB web_connect|web_connect]]'''</td> | |||
<td style="text-align: left;">To force connection to FOTA WEB<br/><br/>Request format: <code>web_connect</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Common commands</td> | |||
</tr> | |||
</table> | |||
===Bluetooth Commands=== | |||
---- | |||
<table class="nd-othertables_2"> | |||
<tr> | |||
<th style="width:15%; text-align: center;">Command</th> | |||
<th style="width:35%; text-align: center;">Description</th> | |||
<th style="width:10%; text-align: center;">Response</th> | |||
<th style="width:15%; text-align: center;">Parameter Group</th> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB btgetlist|btgetlist]]'''</td> | |||
<td style="text-align: left;">Get Bluetooth list (BT3 command; expanded to BT4 list)<br/><br/>Request format: <code>btgetlist 0</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Bluetooth commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB btrelease|btrelease]]'''</td> | |||
<td style="text-align: left;">**BT3 command.** Disconnects current Bluetooth device and pauses auto connect<br/><br/>Request format: <code>btrelease 30</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Bluetooth commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB btscan|btscan]]'''</td> | |||
<td style="text-align: left;">**BT3 command.** Starts Bluetooth scan<br/><br/>Request format: <code>btscan 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Bluetooth commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB btunpair|btunpair]]'''</td> | |||
<td style="text-align: left;">**BT3 command.** Unpair Bluetooth device<br/><br/>Request format: <code>btunpair all</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Bluetooth commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB btvisible|btvisible]]'''</td> | |||
<td style="text-align: left;">**BT3 command.** Sets Bluetooth to visible with TMO<br/><br/>Request format: <code>btvisible 30</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Bluetooth commands</td> | |||
</tr> | |||
</table> | |||
===Commands Related to Features=== | |||
---- | |||
<table class="nd-othertables_2"> | |||
<tr> | |||
<th style="width:15%; text-align: center;">Command</th> | |||
<th style="width:35%; text-align: center;">Description</th> | |||
<th style="width:10%; text-align: center;">Response</th> | |||
<th style="width:15%; text-align: center;">Parameter Group</th> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB auto_calibrate:get|auto_calibrate:get]]'''</td> | |||
<td style="text-align: left;">Gets auto calibration state<br/><br/>Request format: <code>auto_calibrate:get</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Commands related to features</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB odoget|odoget]]'''</td> | |||
<td style="text-align: left;">To get odometer value<br/><br/>Request format: <code>odoget</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Commands related to features</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB on_demand_tracking|on_demand_tracking]]'''</td> | |||
<td style="text-align: left;">To set on demand tracking<br/><br/>Request format: <code>on_demand_tracking 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Commands related to features</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB towingreact|towingreact]]'''</td> | |||
<td style="text-align: left;">Towing reactivation<br/><br/>Request format: <code>towingreact</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">Commands related to features</td> | |||
</tr> | |||
</table> | |||
===OBD Commands=== | |||
---- | |||
<table class="nd-othertables_2"> | |||
<tr> | |||
<th style="width:15%; text-align: center;">Command</th> | |||
<th style="width:35%; text-align: center;">Description</th> | |||
<th style="width:10%; text-align: center;">Response</th> | |||
<th style="width:15%; text-align: center;">Parameter Group</th> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB cleardtc|cleardtc]]'''</td> | |||
<td style="text-align: left;">To clear DTC<br/><br/>Request format: <code>cleardtc</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">OBD Commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB faultcodes|faultcodes]]'''</td> | |||
<td style="text-align: left;">To get list of OBD fault codes<br/><br/>Request format: <code>faultcodes</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">OBD Commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB getvin|getvin]]'''</td> | |||
<td style="text-align: left;"><br/><br/>Request format: <code>getvin</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">OBD Commands</td> | |||
</tr> | |||
<tr> | |||
<td style="text-align: center;">'''[[FMB obdinfo|obdinfo]]'''</td> | |||
<td style="text-align: left;">To get OBD information<br/><br/>Request format: <code>obdinfo 1</code></td> | |||
<td style="text-align: center;">Yes</td> | |||
<td style="text-align: center;">OBD Commands</td> | |||
</tr> | |||
</table> | |||
Revision as of 09:09, 22 April 2025
Commands apply for FMB920:
All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.
If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
SMS command structure:
<SMS login><space><SMS password><space><command><space><value>
SMS command getinfo example:
- If you have set SMS login and password:
login pass getinfo - If SMS login and password are not set leave two spaces before command:
getinfo
GPRS commands require Codec 12 protocol.
Common commands
| Command | Description | Response | Parameter Group |
|---|---|---|---|
| allver | To get all possible versions used by device Request format: allver |
Yes | Common commands |
| auto_calibrate:capture_clean | Start Trip Simulator capturing and reset AXL calibration Request format: auto_calibrate:capture_clean |
Yes | Common commands |
| auto_calibrate:clear | Request format: auto_calibrate:clear |
Yes | Common commands |
| auto_calibrate:set | Initiates auto calibration process and sets calibration vectors Request format: auto_calibrate:set G1,2,3 R4,5,6 |
Yes | Common commands |
| auto_calibrate:status | Request format: auto_calibrate:status |
Yes | Common commands |
| auto_calibrate:stop_capture | Stop capture and move Trip Simulator file to logs Request format: auto_calibrate:stop_capture |
Yes | Common commands |
| auto_calibrate:tryforever | Request format: auto_calibrate:tryforever |
Yes | Common commands |
| battery | To get battery state Request format: battery |
Yes | Common commands |
| bbinfo | To get blackbox information with event timestamps Request format: bbinfo 20 |
Yes | Common commands |
| bbread | To get blackbox information Request format: bbread 20 |
Yes | Common commands |
| None | Forwards data to connected device (Server->BT communication) Request format:
|
Yes | Common commands |
| buzz | To set buzzer ON/OFF for a specified timeout Request format: buzz 1 60 |
Yes | Common commands |
| calibrate | Request format: calibrate |
Yes | Common commands |
| canflashstats | Prints various statistics about FMCAN flash usage Request format: canflashstats |
Yes | Common commands |
| cleardigoutprio | To clear DOUT priorities Request format: cleardigoutprio 1 2 |
Yes | Common commands |
| countrecs | To get record count Request format: countrecs |
Yes | Common commands |
| cpureset | To reset CPU and restart device Request format: cpureset |
No | Common commands |
| defaultcfg | To reset configuration to its default Request format: defaultcfg |
Yes | Common commands |
| deleterecords | To delete stored records Request format: deleterecords |
Yes | Common commands |
| delkey | To delete configuration keyword Request format: delkey oldkey |
Yes | Common commands |
| exceptions | To get exception list Request format: exceptions |
Yes | Common commands |
| fc_ | To reset fuel consumption parameters Request format: fc_ reset |
Yes | Common commands |
| file upl req | To upload file Request format: file upl req firmware,example.com,80,apn,user,pass |
Yes | Common commands |
| FIXTEST | Performs HOT/WARM/COLD fix tests and returns performance results Request format: FIXTEST 1 4 40 1 |
Yes | Common commands |
| flush | To initiate data (record) sending Request format: flush 123456789012345,apn,login,pass,192.168.1.1,8080 |
Yes | Common commands |
| fwstats | Get data about FW and restarts Request format: fwstats 1 |
Yes | Common commands |
| getcontsens | To get continuous sensor count and IDs Request format: getcontsens |
Yes | Common commands |
| getgps | To get GPS moment data Request format: getgps |
Yes | Common commands |
| getimeiccid | Request format: getimeiccid |
Yes | Common commands |
| getimsi | Get ACTIVE SIM IMSI number Request format: getimsi |
Yes | Common commands |
| getinfo | To get information about device Request format: getinfo |
Yes | Common commands |
| getio | To get IO status Request format: getio |
Yes | Common commands |
| getops | Get visible operators list Request format: getops |
Yes | Common commands |
| getparam | To get parameter value Request format: getparam 2001 |
Yes | Common commands |
| getrecord | SMS command initiates saving and sending of high priority record Request format: getrecord |
No | Common commands |
| getstatus | To get device status information Request format: getstatus |
Yes | Common commands |
| getver | To get version information Request format: getver |
Yes | Common commands |
| ggps | To get location information with google link Request format: ggps |
Yes | Common commands |
| ggpsutc | To get location information with google link (adjusts time per configurator time zone) Request format: ggpsutc |
Yes | Common commands |
| log2sd | To set logging configuration Request format: log2sd 2,30,example.com,80 |
Yes | Common commands |
| log2sdfilterset | To set filters of device log Request format: log2sdfilterset 1;2;3 |
Yes | Common commands |
| lowpowermode | To enable/disable Low Power Mode (LPM) Request format: lowpowermode 1 |
Yes | Common commands |
| None | Forwards data to OBD Request format:
|
Yes | Common commands |
| obdudscmd | Request format: obdudscmd 0x01,mode,did,data,cra |
Yes | Common commands |
| obdudsrdbid | Request format: obdudsrdbid 0x01,0x02,0x03 |
Yes | Common commands |
| privatemode | To turn private mode ON/OFF Request format: privatemode ON |
Yes | Common commands |
| readio | To get IO element data Request format: readio 1 |
Yes | Common commands |
| reset_axl_calib | To reset AXL calibration Request format: reset_axl_calib |
Yes | Common commands |
| savecontsens | Saves currently visible sensor IDs to flash Request format: savecontsens |
Yes | Common commands |
| sdformat | To format SD storage Request format: sdformat |
Yes | Common commands |
| secooff | To turn off Seco functionality Request format: secooff |
Yes | Common commands |
| secoon | To turn on Seco functionality Request format: secoon |
Yes | Common commands |
| setbtdataperiod | To set NMEA log period (0-255) Request format: setbtdataperiod 10 |
Yes | Common commands |
| setdigout | Set digital output Request format: setdigout 1 30 |
Yes | Common commands |
| setdigoutm | Set digital output with priority (forces DOUT setting) Request format: setdigoutm 1 30 |
Yes | Common commands |
| setigndigout | Controls DOUTs after ignition is turned off with specified timeouts and delays Request format: setigndigout 1 15 20 1 15 20 |
Yes | Common commands |
| setkey | To set or change configuration keyword Request format: setkey oldkey newkey |
Yes | Common commands |
| setparam | To set parameter value Request format: setparam 2001:wap |
Yes | Common commands |
| None | Forwards data to connected device (client or server connection) Request format:
|
Yes | Common commands |
| tpcmdconnect | Connects to third party AWS MQTT server and listens for secoon or secooff commands Request format: tpcmdconnect example.com;8883;30 |
No | Common commands |
| tsensors | To get Dallas temperature sensor data Request format: tsensors |
Yes | Common commands |
| wdlog | To get watchdog status Request format: wdlog |
Yes | Common commands |
| web_connect | To force connection to FOTA WEB Request format: web_connect |
Yes | Common commands |
Bluetooth Commands
| Command | Description | Response | Parameter Group |
|---|---|---|---|
| btgetlist | Get Bluetooth list (BT3 command; expanded to BT4 list) Request format: btgetlist 0 |
Yes | Bluetooth commands |
| btrelease | **BT3 command.** Disconnects current Bluetooth device and pauses auto connect Request format: btrelease 30 |
Yes | Bluetooth commands |
| btscan | **BT3 command.** Starts Bluetooth scan Request format: btscan 1 |
Yes | Bluetooth commands |
| btunpair | **BT3 command.** Unpair Bluetooth device Request format: btunpair all |
Yes | Bluetooth commands |
| btvisible | **BT3 command.** Sets Bluetooth to visible with TMO Request format: btvisible 30 |
Yes | Bluetooth commands |
Commands Related to Features
| Command | Description | Response | Parameter Group |
|---|---|---|---|
| auto_calibrate:get | Gets auto calibration state Request format: auto_calibrate:get |
Yes | Commands related to features |
| odoget | To get odometer value Request format: odoget |
Yes | Commands related to features |
| on_demand_tracking | To set on demand tracking Request format: on_demand_tracking 1 |
Yes | Commands related to features |
| towingreact | Towing reactivation Request format: towingreact |
Yes | Commands related to features |
OBD Commands
| Command | Description | Response | Parameter Group |
|---|---|---|---|
| cleardtc | To clear DTC Request format: cleardtc |
Yes | OBD Commands |
| faultcodes | To get list of OBD fault codes Request format: faultcodes |
Yes | OBD Commands |
| getvin | Request format: getvin |
Yes | OBD Commands |
| obdinfo | To get OBD information Request format: obdinfo 1 |
Yes | OBD Commands |