Difference between revisions of "FMB flush"
From Wiki Knowledge Base | Teltonika GPS
Atabasnikov (talk | contribs) m (Atabasnikov moved page FMB120 flush to FMB flush) |
Atabasnikov (talk | contribs) m |
||
| Line 1: | Line 1: | ||
| + | {{Template:FMB FW development notice}} | ||
| + | |||
Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered:<br/> | Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered:<br/> | ||
1.# - IMEI<br/>2.# - APN<br/>3.# - GPRS LOGIN<br/>4.# - GPRS PASSWORD<br/>5.# - IP<br/>6.# - PORT<br/>7.# - MODE (0-TCP/1-UDP)<br/> | 1.# - IMEI<br/>2.# - APN<br/>3.# - GPRS LOGIN<br/>4.# - GPRS PASSWORD<br/>5.# - IP<br/>6.# - PORT<br/>7.# - MODE (0-TCP/1-UDP)<br/> | ||
Revision as of 10:28, 9 May 2018
Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you do not need to enter parameter (APN Login/APN Pass) – do not put space, simply put comma and enter next parameter.
Example:
"opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0"
| Response details | Description |
|---|---|
| FLUSH SMS Accepted | FLUSH SMS Accepted. |
| # records found on FLASH | Number of records found on FLASH. |
| Minimum Records to Send: # | Number of minimum saved records to send. |
| GPRS Enabled: # | State of the GPRS connection: 0 – disabled; 1 – enabled. |
| Time Sync: # | Indicates time synchronization on the device: 0 – not synchronized; 1 – synchronized. |
Example:
"FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1. GPRS Enabled: 1. Time Sync: 1"
